Try using hose and syringe on the bleeder valve. You can press and pump brakes w/o air entering the valve because of the vacuum on the syringe.
@kratoz_8582 ай бұрын
Will the fuel spill if i remove the hose under the tank?
@jnmtv64202 ай бұрын
Yes
@minorityofone15103 ай бұрын
Only one pad the piston side should be greased! Properly remove all the grime from the brake piston, rotate it, and push it back in
@jnmtv64203 ай бұрын
Thanks for the input
@pdvd783 ай бұрын
Between all the shitty videos on youtube how to work on a versys finally somebody who has made good ones!!!! Thanks so much!
@jnmtv64202 ай бұрын
Glad you liked it happy to be of help
@pdvd783 ай бұрын
Thnx for this clear video!
@indodeal4 ай бұрын
Thanks for sharing! I just got a Versys 2011 so I was just wondering about that! 👍
@jnmtv64203 ай бұрын
Glad to be of help
@Dra60oN4 ай бұрын
You filled the coolant tank above the "Full" F-line. Based on the manual you should fill it till the F-line only. Maybe there will be some negative side effects if you overfill the coolant tank?
@jnmtv64203 ай бұрын
Hi, thank you for pointing that out. Yes I actually filled it above the F line initially and let it settled, the actual volume of coolant used was 1.2 Liters max
@samdavis11283 ай бұрын
Do I need to fill the tank and the reservoir tank or just fill the reservoir tank? New to bikes about to change mine
@jnmtv64203 ай бұрын
@@samdavis1128 you can do both either, it doesn't matter as long as you fill it though filling the radiator first will save you a lot of time waiting for it to settle from the reservoir.
@samdavis11283 ай бұрын
Thanks I did it that way. Thanks for the video
@DominikPhysique4 ай бұрын
0.8 mm and 0.08 is a big difrence in this situation
@jnmtv64203 ай бұрын
Hey, thanks for pointing that out, the correct measurement is 0.8mm to 0.9mm, my video image has typographical error of 0.08mm and 0.09mm :)
@stephengrainger75864 ай бұрын
Why is it so hard to change the spark plugs
@jnmtv64203 ай бұрын
Yeah, hehe they designed their motorcycles like that haha
@ThenameisJeydee5 ай бұрын
'Yung akin hindi na bigla umilaw. Tinesting ko 'yung wire connection, 'yung wire na i coconnect sa ballast walang kuryente. Puwede ko ba ipa repair ito sa GR?
@jnmtv64203 ай бұрын
Hello, please ask your supplier for this. Thank you
@MichaelGawlik5 ай бұрын
Thanks for your Video! 🤎 I need to remove the tank to tidy up the cables (fog light installing). But now I'll check the air filter and change the oil too. Start working on my bike. Thank you.
@jnmtv64203 ай бұрын
Glad to be of help.
@kridemotovlogs47586 ай бұрын
1 week palang po gr50x namin sira agad yung right side, mg clear water nlng tayu. Mas quality pa
@user-vz2fi5eq3t7 ай бұрын
Very good video ! Thanks from Argentina.
@jnmtv64203 ай бұрын
Glad you liked it!
@FireEmblemSOS9 ай бұрын
Is that drip at the end normal from the plug?
@jnmtv64203 ай бұрын
Hi, no it is not normal. I actually tightened up the drain plug afterwards. If there are drips from the plug it means that the plug is not tight enough
@pdvd789 ай бұрын
Use copper grease! And first unlock the abs sensor (if you have one). And cleaning has to be done with brake cleaner!
@AKGamingLive11 ай бұрын
mag kano inabot nyan sir
@jnmtv642011 ай бұрын
Front Brake discs: around Php18,000+ for the pair; Brake pads: Php8,000+ for the pair
@ranacamera896311 ай бұрын
Help full , Thank you very much 🙏
@subto-tnxph546911 ай бұрын
Mao ba
@RidingandFlying11 ай бұрын
Nice video. Very efficient 👍👍
@jnmtv642011 ай бұрын
Glad you liked it!
@chanchoonkit4774 Жыл бұрын
Thanks for the detail tutorial! Do you need to suck out all the petrol gasolinr when removing the fuel tank?
@jnmtv6420 Жыл бұрын
No need to remove the fuel
@NeveMindAnything Жыл бұрын
Hi there, i didn't see you disconnecting the fuel tank overflow tube? The one running next to the breather tube down to your bike?
@jnmtv6420 Жыл бұрын
Its the BREATHER TUBE. Check 1:23
@NeveMindAnything Жыл бұрын
@@jnmtv6420 that's indeed the breather tube, but there should be two tubes running down. 1 breather tube and 1 overflow tube, so water can run down.
@jnmtv6420 Жыл бұрын
@@NeveMindAnything let me double check since there are only 2 tubes hanging by the kickstand, 1 for the breather tube and the next is from the air filter assembly however the one from the air filter does have a cover. thanks for pointing that out :)
@teslastream Жыл бұрын
Salamat po from Croatia, you helped out a lot man! :)
@jnmtv6420 Жыл бұрын
Glad to be of help man!
@wurmer23 Жыл бұрын
Yan din kaya ang cause na nagfi flicker o di kaya kahit di naka turn on kusa na lang sya magiilaw? Minsan naman biglang on tapos naka blinker mode agad.
@jnmtv6420 Жыл бұрын
Maaring ganun na nga po, baka may nag short na mga connections kaya ganun, masaklap di pa naman na rerepair ito kung yung LED na mismo na sira
@saxologist1 Жыл бұрын
Great video but I wouldn't call it easy.
@jnmtv6420 Жыл бұрын
Hehe I meant "Easy" is explaining it in detail ;)
@cyrusm3391 Жыл бұрын
Do you need to empty the fuel tank? If so, what would be the best way?
@jnmtv6420 Жыл бұрын
You may opt to empty the fuel tank. Just use a fuel siphon pump. But emptying the tank is optional.
@zhangyi4647 Жыл бұрын
thanks for sharing this video, it helps a lot.
@jnmtv6420 Жыл бұрын
Glad to be of help
@MathieuTechMoto Жыл бұрын
Great little video, not too long, the music is relaxing, keep up the good work
@rileysion474 Жыл бұрын
Anong size ng hex head ng spark plug?
@jnmtv6420 Жыл бұрын
16mm
@rileysion474 Жыл бұрын
@@jnmtv6420 same lng naman yan sir ng ninja650 right? Planing to change mine. Thnx!
@jnmtv6420 Жыл бұрын
@@rileysion474 yup
@junleomodularyo9135 Жыл бұрын
crystal clear video... good job
@andrewsoldan6050 Жыл бұрын
any difference with that new high flow filter?
@jnmtv6420 Жыл бұрын
I don't see any difference in performance (based on my observations for a year) but I think there will be significant improvement if I were to change full exhaust pipe.
@knet93TravelAdventures2 жыл бұрын
how to join on versys family ? :)
@nfmg22652 жыл бұрын
The best on KZbin. GOD BLESS YOU.
@nomadsmith2 жыл бұрын
Your little clippy removal is so easy, unless you are outside thinking something wrong, which I was, and you SAVED me so much time! Your video was most excellent!
@thegoonch12 жыл бұрын
Thanks, my friend! Just what I needed to remove the tank for a valve clearance check.
@jnmtv64202 жыл бұрын
Glad to be of help
@bossb25392 жыл бұрын
Excellent video! Good mechanic! thanks buddy!
@jnmtv64202 жыл бұрын
Glad it helped
@wicklamulla2 жыл бұрын
good video, does this apply to the Gen 1 2007 model?
@jnmtv64202 жыл бұрын
Hi, I'm not sure if its exactly the same but I think the basics are there, let me see what I can do. :)
@lio19992 жыл бұрын
How come lights with this cost have such issue?
@jnmtv64202 жыл бұрын
Maybe because water/moisture can get in thru the drain located below the aux light assembly due to water splash/driving in flooded areas
@lio19992 жыл бұрын
@@jnmtv6420 maybe, do you have any idea what website is selling such lights?
@jnmtv64202 жыл бұрын
@@lio1999 I just bought it locally here in the Philippines. I am not sure if there are like this in other countries or maybe its rebranded. From what country are you? :)
@benedictjose52362 жыл бұрын
hm po
@jnmtv64202 жыл бұрын
12k po sa LED Lights PH (Antipolo) ko sya nakuha
@hazeljenellvlog68532 жыл бұрын
Nice video
@jnmtv64202 жыл бұрын
Thanks
@MartijnKort2 жыл бұрын
Great video!
@jnmtv64202 жыл бұрын
Thank you for liking
@thomaskamei42682 жыл бұрын
, super💯💯💯👍👍👍
@jnmtv64202 жыл бұрын
Thank you 👍
@bryanreilly41172 жыл бұрын
I presume you need to run the tank to empty first to prevent fuel spilling out the bottom?
@jnmtv64202 жыл бұрын
Hi, there's no need to empty the tank, but you can do that either if you want ;)
@coricsman2 жыл бұрын
Petmalu po Congrats!
@jnmtv64202 жыл бұрын
Salamat po sir
@khangvlog23232 жыл бұрын
movies 🤣
@jnmtv64202 жыл бұрын
Cinematic sana hehe
@jeffreylindop57822 жыл бұрын
very well explained video thank you.
@jnmtv64202 жыл бұрын
Glad it was helpful!
@lleraquino8272 жыл бұрын
Sir san po kayo nakabili nang crashguard nyo sa V650?
@jnmtv64202 жыл бұрын
hi, pinagawa po dito sa amin sa SJDM, Bulacan :D
@luispatriciomoralesmontana84802 жыл бұрын
Do you have a video with the electrical connection
@jnmtv64202 жыл бұрын
Hi, no, but I can make one if you need it :)
@Xexxy2 жыл бұрын
Very nice ensemble... the sountrack, the scene, a cliffhanger!
@jnmtv64202 жыл бұрын
Thanks!
@intergalacticbasketballdro71862 жыл бұрын
The "easy" way ? That looked like the "typical" way !