manusbrewer

Пікірлер

@SgtZak_ 5 күн бұрын

Thanks for the video. Good job

@bobmarley1686 Ай бұрын

Oh God. Yes! That’s It! Feels good to have the First Comment.

@furkatsnb___1678 2 ай бұрын

Hello from Kyrgyzstan bro, great stream!

@SuperThunder 3 ай бұрын

Very Good Gameplay My Friend ! , Congratulations !

@manusbrewer 3 ай бұрын

Thank you 👍 Glad it was entertaining!

@Corsair37 3 ай бұрын

I've been watching your stream on YT for a week or so now. Generally good stuff, with a few observations: 1. Yes, when you switch from elite to specialized, it removes all equipment and consumables. Any previously mounted equipment while Elite will show up under In Another Configuration (meaning it was part of the plane when it was elite). I don't kow why they do that, but it's been that way as long as I've been playing (about 3 years or so) and it's a bit annoying. 2. That last battle was painful to watch. Light fighters are not intended as ground attack aircraft (I believe LF weapons are even nerfed against ground targets). You did 12 times as much ground damage as aerial damage (~12K vs ~1K). Blowing up ground targets is fun, but I recommend using ground attack aircraft for that, as you'll be much more successful with them than fighters. Light fighters primary role is to knock down other aircraft - either in capturing a sector or defending a sector. In the amount of time you spent over the plant at the start, you might have earned 25 or 75 capture points - you only get capture points for destroying all sections of a given ground target. In that same amount of time, you could have easily picked up 120 points or so shooting down ADA or red planes. 3. Once the plane is specialized, I recommend fully equipping it if you're going to fly it for a while, as the specialization opens up extra equipment slots. The other benefit of specialization is that equipment bonuses for Advanced and Ultimate equipment work (only Stock and Improved equipment can use the bonuses prior to specialization. Anyway, I look forward to seeing more of your content, and the above are merely observations and suggestions. Maybe we'll meet in the skies some day o7

@manusbrewer 3 ай бұрын

Thanks! I try not to use fighters against ground targets, but will go after the AA guns to give our bombers a clearer shot if the defence aircraft are already gone. As for loading out the new slots, it seems to be a trade-off with manoeuvrability and damage. I'll often not make the jump to premium to remain a little more nondescript in the air. And maybe we will meet in-game sometime. I have limited time before work and often have other things on the weekends. But have noticed some names that pop up regularly. As long as everyone it having fun, it's all good!

@naldebol 3 ай бұрын

Keep the videos coming, brother. Best to you !

@manusbrewer 3 ай бұрын

Thanks! Hope they are entertaining enough! lol!

@jessejames5825 Жыл бұрын

you don't mention that there are 2 versions of this Z600. a V1 and a V2. The V1 is pretty much not too good. 12GB ram max per processor. YUCK

@jessejames5825 Жыл бұрын

why do you call it the Zed 600?

@manusbrewer 3 жыл бұрын

Sadly, we were a day late. Disappointing. :-(

@theflotingheadproduc 3 жыл бұрын

Yay! Success!!!

@skyoptics 3 жыл бұрын

i think your hard drive hdd? is broken swap it out and try boot of a usb drive download windows from another pc

@manusbrewer 3 жыл бұрын

Thanks! Yes, I had a couple old drives that are certainly questionable! I did get everything working in the end. In a later search I found that the cable for the drive wasn't seated properly on the motherboard! Ugh! You would have thought that I would have caught that on the first pass through! Oh well. :-)

@mupfelmax530 3 жыл бұрын

Hi i byed a one with 2 x x5570 last week for running PCB Cad and little bit of Coding on Microcontroller with VS Code. Regards from Germany

@manusbrewer 3 жыл бұрын

I have it up and running now with a gtx 770 for some light gaming. I want to set up for gaming/streaming and see how well it responds. I also want to try some rendering, the dual cpu should handle it well.

@theflotingheadproduc 3 жыл бұрын

That's really cool! 😄 Thanks for sharing and I hope you're staying safe at work! 😟💜💜💜

@VattenDemonen 4 жыл бұрын

The hdd probably works but you need a driver for the sata controller for it to se the drive in win 7

@manusbrewer 4 жыл бұрын

As it turned out, I had neglected to check the sata plugs on the bottom edge of the motherboard! One was off; guess which one? Yup. In the end, the one HDD drive was indeed dead though. I may try again in an external enclosure later, but I think it's gone for good. I did get the SSD to be seen eventually.

@theflotingheadproduc 4 жыл бұрын

It's so satisfying to finish a project with immediate utility! 😁🎉

@theflotingheadproduc 4 жыл бұрын

This was cool! 😁

@manusbrewer 4 жыл бұрын

Glad you liked it. :-)

@memphismayhemAU 4 жыл бұрын

my daily driver. dual x5675s z600

@MhWow66 3 жыл бұрын

I just got a z600 with the double Xeon 5570 and 8gb ram, i was impressed with the cinebench score....for not much cash ya cant complain.

@theflotingheadproduc 4 жыл бұрын

What about just using raspberry juice? Would that work for this kind of project?

@manusbrewer 4 жыл бұрын

You could use juice, but since most commercial juice extraction uses heat there would be every chance that your beverage will end up cloudy. This is only a minor visual problem and wouldn't have an effect on the taste, and if you had decided to drink it with the yeast still in suspension ("Mit hefe"), then it wouldn't matter at all! If you are make the juice yourself, then using the lower 60 deg C for 5 minutes to pasteurize followed by filter/pressing the juice out should work as well. For 1 litre of apple juice I wouldn't recommend more than 1/2 cup of berries to start. Raspberries have a very strong flavour and you might find it unpleasant once the sweetness has turned to alcohol. Like any art, try it and see what happens! If you don't like it, adjust and try again! Share with friends (2m apart, of course!) and get their opinions! Look for old brewing/wine-making books in used book sections and see what others have done before! Compare different book advice, talk to others who have tried a thing or two! Try different flavours and carbonation levels! (like a hint of raspberry for colour and a bunch of kiwi could make a nice one if it was fizzy!) Almost anything will work, and by trying you will learn, and the next time will be a new adventure!

@theflotingheadproduc 4 жыл бұрын

Jumped right into this one without an intro this time I see. Still enjoyed it though!😊

@theflotingheadproduc 4 жыл бұрын

Sorry this project is being troublesome. Hope you'll find an affordable way to make it work!

@theflotingheadproduc 4 жыл бұрын

I really like hearing your thoughts on things! Not just about what you're working on. The let's play idea sounds great! I'd love to see your commentary on some games! 😁👍

@theflotingheadproduc 4 жыл бұрын

I hope these pumpkins grow well and in time for October! 😁

@theflotingheadproduc 4 жыл бұрын

Yay cookies!! 😁 Wish I could bake with you, that'd be nice.

@manusbrewer 4 жыл бұрын

So I'm looking over other game machine blogs and there is the option of turning the sunfire x2270 into a gaming rig as well/instead. It only has one pci slot for the graphics card or anything else, but has built in slots for four for conventional drives. I could also load all 12 dimm slots to get 96GB of ram. The PCIe slot is gen2 and with the current riser will only hold a half length 35W card, but that shouldn't be hard to overcome If I'm not worried about keeping it in the current rackmount case. Hmmmmm........ Did I just double my build?!?! Dang.......

@0mn1vore 4 жыл бұрын

Hey. :-) Patrick here; Cat sent me. If the PC has its original key code on the case somewhere, you may be able to go to Microsoft and upgrade from whatever OS it came with to Win10. Cheaper than buying it outright. Hopefully you can buy the upgrade, then download the OS, instead of downloading and installing an older system, *then* getting the upgrade. Steam supports Linux really nicely, so that could be another option. Not sure about other game companies though. I'm also not sure if NVIDIA's one of the Good Guys or one of the Bad Guys, wrt Linux and video drivers. BTW, for a second I thought you were going to turn the 1U server into a gaming rig... Which could be done, although it would be noisy. I've done my video editing on an HP ProLiant DL360 with 32GB memory [and that's only using half its slots], 1.3TB RAID array, two 3gHz quad-core Xeon processors [8 cores altogether], and an AMD Radeon R7 240 graphics card -- and in my `Lucifer' video, it shows. :-\ Notice the faint whisper of `Ain't No Rest for the Wicked', just before the real song starts? That's an accident, didn't hear it over the cooling fans. Takes a full minute for the hardware to wake up, but once it's ready to boot the OS, it only takes 15sec from bootloader to desktop. Also, it draws 300 watts idling, 420 watts if it's actually busy with something, 30 watts *turned off,* so I switch it off at the power supply after OS shutdown.

@0mn1vore 4 жыл бұрын

NVIDIA update; looks like they were one of the Bad Guys, but are trying to rehabilitate themselves. www.forbes.com/sites/jasonevangelho/2019/12/06/nvidia-is-prepping-an-unexpected-surprise-for-linux-users-in-2020/

@manusbrewer 4 жыл бұрын

Hey Patrick! I tried that with the mini pc I picked up, the key code was rejected. I contacted asus (manufacturer) and the only option they gave was to ship the whole machine to them and back. With the shipping costs today, it wasn't worth it for a $10 computer. It looks like it had at least XP on it, but I could try that route again. I guess I had already dismissed it as an option because of my last experience! I need to watch that bias..... :-D

@jessecrawford1926 4 жыл бұрын

Keep it up, great video! Did you ever think about using FollowSM[.]com??! You should use it to help get your videos higher in the search results!!

@theflotingheadproduc 4 жыл бұрын

I'll ask around for some OS stuff okay?

@manusbrewer 4 жыл бұрын

Oh man, this is WAY TO LONG! Sorry! It is late and I didn't have the time to do a proper edit. Still, the data is there. I will post updates to this as I process the beverage through the stages from here to drinking. :-)

@theflotingheadproduc 4 жыл бұрын

I thought you did have bread pans. Wait, is that where I got mine?

@manusbrewer 3 жыл бұрын

Yours were the ones we used. :-)

@theflotingheadproduc 4 жыл бұрын

I'm enjoying this series, whichever project you choose! 😁

@theflotingheadproduc 4 жыл бұрын

I recognise some of those soapstone pieces from school! 😆 I had been thinking wind-chime when I brought them home. Feel free to use them for something else though!

@theflotingheadproduc 4 жыл бұрын

Yay! 😄🎉 Project Birdhouse!!

@theflotingheadproduc 4 жыл бұрын

Yay! The bird houses finally get to be used!