FlightSimPoint

Пікірлер

@gefersonleandroalves6530 4 ай бұрын

Hi friend, how are you? How is configuration done in Mobilfight with pmdg? Can you give me a tip? I have questions about how to configure this solenoid in mobiflight to use with pmdg ngxu in prepar 3d v4.5

@tafaragadze6432 7 ай бұрын

Did you buy this or make it? Because i also want this.

@Lokoran Жыл бұрын

Hello! I´m trying to show de the overheadpanel on my prosim 737, but can find the option, do you can help me?

@brendanlewis378 2 жыл бұрын

So I bought this for MSFS2020 and I can't get it to work??????

@lewymartain8267 2 жыл бұрын

Hi there. I have installed Prosim and have filled in the licence and download serial numbers. Then I get a window asking for path to simulator as none found. I have tried everything in this window to input the path and without success. I am on my 3rd day of trying can you help me please?

@PlanesAirplanes 2 жыл бұрын

Does it work with msfs 2020?

@aurimasandrijauskas2172 3 жыл бұрын

Why I dont have these options?

@miketango507 3 жыл бұрын

kind sensors? link? how build it?? we need more info pls

@flake8686 3 жыл бұрын

How do you set this up for flight sim 2020

@captain7956 3 жыл бұрын

How did you add the fourth slot?

@deesto 3 жыл бұрын

@FlightSimPoint @DeltaAlphaLima Sergey, I’m trying to get in touch with you for an order are you still manning the [email protected] email address, please?

@Michael-vf7oi 4 жыл бұрын

It would be great if you actually spoke. Otherwise the video is worthless

@pomagambokocham.1701 4 жыл бұрын

Great Sergey!

@marcdraco2189 4 жыл бұрын

Part falls off, Sergey doesn't miss a beat! Class!

@g7usl 4 жыл бұрын

Still the wrong angle!

@flightsimpoint2200 4 жыл бұрын

The clamp with the right angle (and lower position) was added later.

@lvluisvieira 4 жыл бұрын

Hello Sergey good afternoon, I wonder if it works with FSX ,thank you

@lvluisvieira 4 жыл бұрын

Hi Sergey good afternoon, I wonder if it works well with FSX,thank you very much

@flightsimpoint2200 4 жыл бұрын

Luis Vieira Hi Luis, FSX, P3D and XP11 compatible. Email to simparts.order@ gmail.com and I will send you full information

@stevannikolovski 4 жыл бұрын

That plastic seems a bit weak how handles are twisting under a pressure of a hand. Isn't it? Nice but i think still can do better by means of materials and quality. $160 is a bit too much for plastic like that.

@Stubbino 4 жыл бұрын

That's an issue with the saitek/logitech throttle itself. $160 is on par with other flight sim controller parts.

@grizzlybear1754 4 жыл бұрын

Even the modified versions of saitek stuff looks low quality.

@e.vierasuarez8527 5 жыл бұрын

Donde se puede comprar???graciassssss

@maskystudio9193 5 жыл бұрын

What type Solenoid valve u using

@ericmarciano075 5 жыл бұрын

The Saitek throttle is very soft. With big levers like these, the throttle movement is even softer (because the levers are longer). Is there a way you make the lever movement more firm, more hard?

@flightsimpoint2200 5 жыл бұрын

Yes, I am including special silicon tubes and the springs for handles assembling.

@ShahidKhan-uw2ix 4 жыл бұрын

Wrap the electric tape around the Saitek plastic lever near thee gauge slots

@keneokpareke1753 5 жыл бұрын

Hi I've sent a number of emails to the address and requested membership into the Facebook group. No response. Please assist. I want to order.

@JoJayO 5 жыл бұрын

how does the speedbreaks works? is that own usb conne?

@Michael-vf7oi 5 жыл бұрын

Please talk!

@navidhosseini3920 5 жыл бұрын

Does it work for x plane 11 ?

@flightsimpoint2200 5 жыл бұрын

Navid Hosseini if you asking about the mod, yes it works with xp11. If you about the calibration - xp11 has own internal option to calibrate and define every position of the flaps.

@amretphal3378 5 жыл бұрын

Hello Can you tell me where to buy that mod ?

@DeltaAlfaLima 5 жыл бұрын

Send me an email to [email protected]

@amretphal3378 5 жыл бұрын

Okay

@amretphal3378 5 жыл бұрын

But it all sold out

@deesto 3 жыл бұрын

@@DeltaAlfaLima I’m sending emails there but there is no answer. I purchased this through cockpitbuilders we store but no replies or updates on the order either..can you get in touch please?

@oliviergodefroit1907 5 жыл бұрын

Hello, I would like to build the flap guide, can you send us a template with quotes ? Olivier

@centralflorida1stamendment659 5 жыл бұрын

where di you get the 737 handles to do the modification with? I run P3D V4 flight sim

@flightsimpoint2200 5 жыл бұрын

Central Florida 1st Amendment Accountablity I am producing these mods. Send an email to [email protected]

@Gorilla_Jones 5 жыл бұрын

Do you modify the yoke? I would like to remove the dead zone, and get better feel. Thanks

@boeing737d 5 жыл бұрын

DUDE!!!! I need that!!! I fly 737 all time, I need that thrust reverser. where do i find them online?!!!

@flightsimpoint2200 5 жыл бұрын

send an email to [email protected]

@tonygard6512 6 жыл бұрын

hey sergey how did you/find the command control for the fue lcutoff levers ?

@copilot2518 6 жыл бұрын

prodai mne.

@doughboy11902 6 жыл бұрын

where did you get the bracket your using to mount the Saitek throttle with at an angle like that?

@flightsimpoint2200 5 жыл бұрын

it is produced by me also. send an email to [email protected]

@quin0015 6 жыл бұрын

I saw the Facebook post and it said $190 for BASIC modification and $260 for the version with cutoff levers. What is the difference between the BASIC one and the one with cutoff levers?

@flightsimpoint2200 6 жыл бұрын

Quinten Lee yes, better to send an email to [email protected]

@ferrari2k 5 жыл бұрын

Well.... The basic one is the one of the video and the version with cutoff levers has... well... cutoff levers....

@bialissam6586 6 жыл бұрын

How much it cost to complete?

@bialissam6586 6 жыл бұрын

Is it work on X-Plane 11 and the reverses?

@flightsimpoint2200 6 жыл бұрын

Bial Issam yes

@bialissam6586 6 жыл бұрын

FlightSimPoint thank youu

@thinneverdie2611 6 жыл бұрын

I wanna buy how much?

@AZWildk4t 6 жыл бұрын

Ordered mine and can't wait for them to arrive. I bought original set from cockpitsimparts in the UK. Good product but A/T Disengaged not setup so I modified them myself. I don't have a flaps level so I use 2 buttons on my Saitek yoke. Not ideal. What I love about this product is the use of the flaps, spoiler, and the fuel cutoff. Very well designed and built product.

@bassben7175 6 жыл бұрын

What if I want to fly an 4-engine aircraft?

@MrAdzie91 5 жыл бұрын

Tough shit. Buy two. Obviously. Fucking idiot.

@MichaelChudov 6 жыл бұрын

I am thinking of buying this but where would I be able to buy. Also great design!

@MichaelChudov 6 жыл бұрын

Also would it work with X-Plane 11?

@eduardonascimento1666 6 жыл бұрын

where we can buy ?

@flightsimpoint2200 6 жыл бұрын

Eduardo Nascimento email to [email protected]

@JYCrazy1 6 жыл бұрын

Hi Sergey, at 4:40 you said this is suitable with FSX and P3D, but you didn't mention X-plane 11. Does that mean it isn't compatible with X-plane 11?

@henrywallace3563 4 жыл бұрын

Im wondering this. The thrust levers and buttons will work but im not sure about the flaps steps and the speedbrake axis

@JYCrazy1 4 жыл бұрын

@@henrywallace3563 I can answer that now as I bought the throttles a year ago (I've moved on to a Virtual Fly TQ6+ now). The speedbrake axis doesn't really work well with X-Plane 11, it's not possible to reliably get the detents to work such as arm/flight detent etc, even with custom response curves. It's a running theme with X-Plane axes actually. I'd say the lever is only reliably good for flaps fully up or flaps fully down, so it effectively acts like a slightly more realistic button (i.e., on/off only). In general I'd say the quality of Sergey's throttle handles is absolutely amazing, the buttons are really high quality. My only complaint about them is that the reversers are just button activated and not on an axis, and they don't feel particularly realistic. In terms of the other parts of his solution, the speedbrake lever quadrant is noticeably lower quality and the axis is jumpy, the engine start switch module works, but it isn't smooth and you notice a metal-on-metal grinding in the mechanism. The flaps solution is amazing, but again X-Plane 11 has some issues with reliably hitting the right flaps setting even with custom response curves. Sorry for the long essay but I couldn't find any feedback like this when I was looking at it, so I hope it's useful. In general, I'd say it isn't worth the money for the full solution with the current design, I don't think I'd buy them again and I'd just wait for Honeycomb's upcoming throttle quadrant instead.

@henrywallace3563 4 жыл бұрын

@@JYCrazy1 thank you very much, this was very helpful and as you said i'm just going to wait for the honeycomb one instead. Thanks!

@JYCrazy1 4 жыл бұрын

Henry Wallace No worries! Glad it was helpful :)

@ИванХ-к1л 6 жыл бұрын

Where is stl files?

@flightsimpoint2200 6 жыл бұрын

What for stl files? I do not use stl file extension for production

@flightsimpoint2200 6 жыл бұрын

All these parts made from aluminium, pvc and plastic. The knobs (plastic cast) made from aluminium models with engraved signs. All drawings for production are done by me personally in SolidWorks. No stl files at all. Milling, casting and powder coating