CALEB WARREN

Пікірлер

@valeriemehrer5906 5 сағат бұрын

Is there a different process for accessing the servo if I have a column shift versus the console shift as shown?

@JaelNoel-e7r 13 сағат бұрын

Does this work without the remote?? Is their an alternative

@woundedwhale786 Күн бұрын

Watched 3 or 4 other videos and this seemed the easiest and most logical to try...and it was, and worked first time! Many thanks Dude!

@garymahon1955 5 күн бұрын

Thanks for the video., Good advice for this 70 yo guy trying to save money and fix mine by myself.

@ExploringwithAustinandThomas 9 күн бұрын

I have a different problem it pairs ok but i get "Please Wait" come up on the front, the only way to get it to work is unplug and plug back in, any ideas ? 💡

@andymoser4959 15 күн бұрын

Doesn't work, belt is too short to fold over on itself. Not even close

@YAHChosen144 16 күн бұрын

Thank you so much from NC you really helps me

@mooop348 17 күн бұрын

i came here from a car fixing vid n good grief .........

@JeffreyWalton-p6c 18 күн бұрын

Does that method work on a Dodge hemi motor to

@JeffreyWalton-p6c 18 күн бұрын

Dues that method work awn a hemi motor to

@belenpelua6949 29 күн бұрын

Hello! I have that same problem! Where can I buy this whole plastic thing? Thank you!

@dholfactory5878 Ай бұрын

Thank you my brother I was having problems ❤❤❤

@MrDizaier Ай бұрын

Accucator not working when I change setting front , front and legs … Probably need new ??

@cryptogoatman Ай бұрын

Thank you, the remate did it!!!! 🙌🏼

@Vagkit1 Ай бұрын

Thanks, after many videos the mute/square button was the answer! Cheers 😊

@danishsoft Ай бұрын

loosen up the bolt from bottom?

@spencerkitchens9188 2 ай бұрын

Any chance you could get this without CEL

@spencerkitchens9188 2 ай бұрын

Either way, i think you just solved my headache! Got a '14 in my shop right now. No codes. Runs beautiful until you try to hit the highway. No codes. I think this is the culprit.

@TheSecrecyOfFrequency 2 ай бұрын

Can't you just put the engine in gear with hand brake on?

@estebanportal4170 2 ай бұрын

Usefull... Thanks you save me.

@jeffersonsantos6534 2 ай бұрын

Straight to the point! Great video

@The_girls-Blue.Germanshepherds 2 ай бұрын

Cool video but this in not my Tundra

@westallenshow9204 2 ай бұрын

What did the thing do before you changed silinoid. What were the symptoms...

@molajutt9269 2 ай бұрын

Thank you so much for a straight forward video. NO BS of personal stories, failed attempts to make it funny, and/or most of all NO annoying musics. Thank you for giving written details of the 2nd option to start removing it from the front. MIne was easily removed by starting to pull it up from the front tabs. It just came right out, super easy, 30 seconds!!!

@bwest8372 2 ай бұрын

How do I find that tool?

@angtaz71 2 ай бұрын

Thank you so much for sharing You help me fix my fridge now it works perfect thanks to you 👍

@mikehuot7243 2 ай бұрын

First one Who dont cut it XD

@jeremystrickland348 2 ай бұрын

How do you torque the pulley back on? Do you wrap around the AC compressor?

@rodrigovalenzuela5484 3 ай бұрын

Justo hoy tengo que sacar la polea y tu vídeo es muy importante para hacerlo .. Siempre es más barato comprar una Correa nueva que una herramienta mucho más cara y que no se ocupará siempre .

@gabrielconstantine7384 3 ай бұрын

Freon is freon..lol. NO it's not, read the label to see what type of refrigerant it is.

@madmike4 3 ай бұрын

Mine was stuck on defrost mode so what I did is I got a long flathead screwdriver and forced those gears open . Works great so far and I didn’t take anything apart . In less than 5 minutes. I have nice cold air blowing out . Come winter I might push it back to where it was . Yes it’s half ass but it’s also 17 years old 👍

@wehsmith 3 ай бұрын

Which gears? Could you give a better description? I have been stuck on defrost for a while and getting ready to buy an assembly and replace hoping it is the cause...If there is a quick fix I can do that would be great!!!

@madmike4 3 ай бұрын

@@wehsmith just make sure you have a real long screwdriver for leverage 👍

@madmike4 3 ай бұрын

@@wehsmith Better yet in this guys video towards the end he shows those two gears I’m talking about at top right corner . That very top gear is the one you pry up and you will get it out of defrost mode and more forced air out those front vents

@wehsmith 3 ай бұрын

@@madmike4 Thanks for the info!!!!!

@wehsmith 2 ай бұрын

If anybody is looking at this, that top gear let some air out of face vents, but just a trickle. My issue was after removing servo assemble the gears that are then visible. if looking at it from under steering wheel, there is a lever on the right that one vid says need to be in up position. It was not moving, tried several times, then tried a little more pressure (was doing careful so no break) and back and forth all of a sudden moved to the other position with a CaChunk! THIS opened the face vent !!!!! Also there was a misalignment in the gear under it with a gear you can only see if stick head way under.. notches visibly not aligned. Could not move, unscrewed the lever could get to and moved it to what looked like proper position. Now I have the air bowing out of face vents, no delay on startup, but I am not going to test if it will go to other positions and back til after summer is over.... I will probably post on tundras dot com with pic by this weekend ... username fuzzentropy

@Timocello 3 ай бұрын

Great video super helpful and helped me fixed my vents!!!!

@mrmohr2 3 ай бұрын

This is a really big help! Just knowing that the plastic cover will not come off will save me some time!

@HAlexZalevsky 3 ай бұрын

So what's the fix if my "flap" is broken? What exactly is that part called and how is the dead one removed and new one inserted?

@LeleAlilio 4 ай бұрын

This video is helpful

@miguelcuts6156 4 ай бұрын

Well 10 years later and it still works thank you

@borocamo 4 ай бұрын

Just ordered a new soundbar but now i gotta try this to see if i will just be moving this bar to the bedroom

@JOHNSUE28 4 ай бұрын

Caleb, A personal Thank you!

@RexDogPets 4 ай бұрын

I am getting ready to turn my Prius into a stealth camper/ Package delivery Vehicle. I was dreading getting started. Now I can see step 1 is an easy job. Great video and right to the point. 4 years later this video is still helping people.

@ryannbrown6542 4 ай бұрын

What year is this car?

@danielpacheco8650 5 ай бұрын

Nice man , now i can upgrade to lightwight pulley

@jaystontonnelle2186 4 ай бұрын

How you put the new one back one ?

@user-kl9sr4ry6s 5 ай бұрын

thx

@melldavs 5 ай бұрын

Did you find out what it was

@chriswagner6310 5 ай бұрын

I fixed mine

@chriswagner6310 5 ай бұрын

I had the same problem

@Michael-xr3px 5 ай бұрын

Do you have a link to the tool?

@justinfreeman1839 6 ай бұрын

That’s still not correctly timed, it’s still jumping teeth in your last video!

@uncurablekill 6 ай бұрын

Excellent video. My high beams were stuck on because of this. I’m too lazy to actually fix it, so I just pushed the stalk inward and pushed it back/forth until the high beams went off. I don’t use them often so I’m fine with not having them work right.

@user-cd2wm9xp3p 6 ай бұрын

Model?

@user-qf3hj5gk1e 6 ай бұрын

ty and ty <3

@LawofLiberty 6 ай бұрын

My kids loved watching it with me, although I think they missed the point 😂 God bless your family!

Ең жақсы KZbin

Пікірлер