Maker Decor

Пікірлер

@clydeglass1834 8 сағат бұрын

I happy u didn’t cut out ur mistake n the video. Everyone makes mistakes now and then

@mark-t4d6c 15 сағат бұрын

just a thot, use 1/2" but at letters that have rounded parts use the tin, then it's just a matter of jointing the two different materials smoothly.

@GodsMan500 Күн бұрын

It looks like your plans cover the letters A-Z, but no numbers. Aren’t numbers equally as important for this kind of business?

@reedtl812 Күн бұрын

Awesome work

@MakerDecor Күн бұрын

Thanks!

@mohammadfarhanmir929 Күн бұрын

Is this 3/⁴ or half inch ply. And how tall and wide is this.

@sellarsr123 Күн бұрын

What kind of wood are you using

@MakerDecor Күн бұрын

1/2 inch thick sanded pine plywood or Birch plywood

@ms.nicole1841 2 күн бұрын

Can you make a DIY cart that is meant for a deep fryer?

@ms.nicole1841 2 күн бұрын

I really like this simple design! I’m wanting to build a custom hot dog cart stand with wing flaps that is 3x6 feet.

@ms.nicole1841 2 күн бұрын

Do you think this could be done on a Glowforge?

@onetimearound1275 2 күн бұрын

Very nice 👍

@MakerDecor 2 күн бұрын

Thank you!

@JeffCoyle-u2s 2 күн бұрын

Let's go. You are a big motivating force for me. Rented my first trellis recently. Buil

@MakerDecor 2 күн бұрын

Awesome!! I appreciate your support and good luck!

@Levinatas 3 күн бұрын

Hi, just purchased your plans, good work! What are you using as a floor here? Did it shift on the hotel carpet?

@MakerDecor 2 күн бұрын

Thank you for the support! I have it listed on the bottom supplies list section and discuss a better option there. If I find a better way I will make a video discussing it. But any questions just message the website or Etsy site, as I answer questions much faster. I check KZbin every couple of days. Thank you!

@NipseyEternal99 3 күн бұрын

Nicely done

@MakerDecor 2 күн бұрын

Thank you!

@NipseyEternal99 3 күн бұрын

Do you have a full video of this?

@MakerDecor 3 күн бұрын

kzbin.info/www/bejne/Zni8i5t8jbxshK8

@NipseyEternal99 3 күн бұрын

@@MakerDecor thanks

@valentinahernandez7077 3 күн бұрын

What wood do you recommend when doing this!

@MakerDecor 3 күн бұрын

kzbin.info/www/bejne/Zni8i5t8jbxshK8 Depends, couple of different ways to build it actually. This was just one way to do it so its not so heavy. Here is the full version

@valentinahernandez7077 3 күн бұрын

@MakerDecor thank you!

@karinasalvador9926 3 күн бұрын

I’m glad you are able to build

@MakerDecor 3 күн бұрын

Thanks!

@xoticmarvelreptiles4459 3 күн бұрын

🔥🔥🔥🔥

@MakerDecor 2 күн бұрын

Thanks!!

@scottpage6019 3 күн бұрын

Where do you get the wheels from? Having a hard time locating them.

@MakerDecor 2 күн бұрын

Amazon

@GreenLiv256 3 күн бұрын

❤❤

@MakerDecor 2 күн бұрын

Thank you!

@patriciakolb9125 4 күн бұрын

What size and font did you use for the vogue?

@ramoncardenas2013 4 күн бұрын

What type of wood do you use?

@MakerDecor 4 күн бұрын

Hi, I use either sanded pine plywood or Birch Plywood.

@onetimearound1275 5 күн бұрын

Love this- good to have safety protocol- have you done a red phone booth- that would be fun too- I do love the pink also 😊 love your stuff 👍👍

@MakerDecor 4 күн бұрын

Thank you! I know I was torn between red and pink one. But I figured pink would stand out more, lol.

@onetimearound1275 4 күн бұрын

@@MakerDecorI do love the pink- can’t go wrong either way 😊👍

@emelisandoval7070 5 күн бұрын

do you have a shots cart

@MakerDecor 4 күн бұрын

Yes I am finishing the shot cart video edit and hope to have it up this weekend with plans.

@imadeddine7738 6 күн бұрын

which Leds you using please?

@MakerDecor 4 күн бұрын

Hi, I'm just using shop lights from Amazon. If you search amazon there are a lot of very similar style. Just search shop lights, and they will pop up. Good luck!

@hjkllknk 6 күн бұрын

Amazing vid, how do you usually transport the frame? Are you thinking about how to make easy to flatpack?

@MakerDecor 4 күн бұрын

Hi, yes I made a video showing more detail for the bigger one and it fitting in my truck. kzbin.info/www/bejne/mJaxi59re6qNjtk

@MakerDecor 4 күн бұрын

Here is the smaller one setup as well kzbin.info/www/bejne/qp_FeqZvh7lplac

@delafossekopa828 6 күн бұрын

Hey how did you do the vinyl vogue labels?

@MakerDecor 4 күн бұрын

Hi, I discuss it here at the 10:50 min mark kzbin.info/www/bejne/h6LXYZV6d5ihj5I

@crystaldavis643 6 күн бұрын

Do you think an acrylic sheet could possibly work for the “glass” piece?

@MakerDecor 4 күн бұрын

Hi, yes I do it for the smaller one. But getting a larger plexiglass for the big one can be difficult and very expensive. Its possible, but depends on if you live next to a place that carries that size of plexiglass. Near me they do not, and shipping that size is more than the plexiglass itself. Thank you

@NinaFranklin-g7k 7 күн бұрын

Hey you’re from San Antonio? I actually use Roddis for my wood needs for my laser 😂

@NinaFranklin-g7k 7 күн бұрын

Home Depot and Lowe’s has too many glue spots in their wood

@MakerDecor 4 күн бұрын

Awesome, yeah I started going to Roddis a year or two ago. Been a game changer because the pricing is almost half and the quality is way better. Glue spots, wood knots and warped wood at the box stores is terrible. And roddis loads the material up for me and it's always quick. They are really nice too, I didn't think they would take small orders that's why I never went. But I took a chance and they do, it's been great having them in SA.

@eazyinksllc647 8 күн бұрын

Where do you get the lights from

@MakerDecor 4 күн бұрын

Hi, I'm just using shop lights from Amazon. If you search amazon there are a lot of very similar style. Just search shop lights, and they will pop up. Good luck!

@olubisilatinwo1931 8 күн бұрын

Very detailed tutorial. Please where did you get the light from and what are they called? Thanks

@MakerDecor 4 күн бұрын

Hi, I'm just using shop lights from Amazon. If you search amazon there are a lot of very similar style. Just search shop lights, and they will pop up. Good luck!

@TopTierAtlanta 10 күн бұрын

Ty for sharing this!!

@MakerDecor 10 күн бұрын

Your welcome!

@ms.p6594 10 күн бұрын

What measurements and materials do you use to create this beautiful work of art?

@MakerDecor 4 күн бұрын

Here is the link, thank you! makerdecorshop.com/products/magazine-photo-booth-box-plans-with-measurements

@ms.p6594 4 күн бұрын

@ Thank you kindly for sharing this link. That is very kind of you. I’m excited to get started. I hope to surprise my grand for her 12th birthday next month. (Fingers crossed 🤞)

@ms.p6594 11 күн бұрын

Amazing! ❤

@MakerDecor 4 күн бұрын

Thank you!!

@delafossekopa828 11 күн бұрын

How did you print the labels for your photobooth? Which printer or service did you use?

@MakerDecor 4 күн бұрын

Hi, I discuss it here at the 10:50 min mark kzbin.info/www/bejne/h6LXYZV6d5ihj5I

@belenchis2546 12 күн бұрын

Where can I buy it ?

@roadgarage666 13 күн бұрын

Where we can the stencil?

@MakerDecor 4 күн бұрын

Hi, I carry the plans on my website makerdecorshop.com/products/plinth-prop-table-decoration-digital-download-these-are-only-plans-on-how-to-build-yourself

@leoncito646 14 күн бұрын

Muy bueno

@MakerDecor 4 күн бұрын

Thank you!

@leoncito646 14 күн бұрын

està incrible. puedo usar tu idea?

@MakerDecor 4 күн бұрын

Hi, here is the link makerdecorshop.com/products/magazine-photo-booth-box-plans-with-measurements

@deeharris3328 14 күн бұрын

How do you add the pink pay phone? Is there a hook for it?

@MakerDecor 4 күн бұрын

I just added a screw that the phone can hang on like a hook. It has like a picture frame clip in the back of the phone

@deeharris3328 4 күн бұрын

@@MakerDecor Okay, thanks for the response! I always saw you set it up, but never any mention of how the phone was hooked up😉

@deeharris3328 4 күн бұрын

@@MakerDecor Love your videos also!

@MakerDecor 4 күн бұрын

@@deeharris3328 Your welcome!

@MakerDecor 4 күн бұрын

@@deeharris3328 Thank you, appreciate the support!

@mohammadfarhanmir929 15 күн бұрын

This was so much useful. Thank you for the video. More than the build itself, the context... mentioning why you ended up with flexiply etc. etc.. great job!

@MakerDecor 14 күн бұрын

Thank you very much, appreciate you comment and support!!

@ryanasutton2694 15 күн бұрын

Hi ! Do you have an estimate on the cost for materials ?

@MakerDecor 4 күн бұрын

I am sorry I do not as the price of lumber fluctuates a lot now. And can vary depending on where you live and where you shop. I am always afraid to say a price and then a year later pricing changes. Or somebody lives in a different state than me and pricing will be different. Then I know people will feel frustrated because I said I built it for this amount and they did not. I have all the supplies listed with images, but people are free to find those supplies at the place that gives them the best deal. Or cut and make some of them to save money. I am sorry about that, it can just open up a lot of issues. I will tell you probably can not be built for $100 anywhere. But someone can build it in one state for $200 maybe and someone can build it in another state for $400? It just varies so much when and where. Thank you

@SergioTrujillo11 15 күн бұрын

Me: This homie has to be in San Anto...yup. He is. :)

@MakerDecor 14 күн бұрын

lol🤣

@MarlenShaymukhanbetov-q9z 17 күн бұрын

Great idea

@MakerDecor 17 күн бұрын

Thanks!

@NitayaDuyaba-e1e 18 күн бұрын

What is the app?

@sasikumarkovalan6460 21 күн бұрын

When reusing it next time, do you simply remove the stickers, or do you tear off the front sheet and replace it with a new one ya?

@MakerDecor 20 күн бұрын

Hi, thanks for watching. I have a video where I discuss using vinyl. I will link it below. For this setup I attempted a new version of the vinyl for the first time which is thicker and less wrinkles. A little bit more expensive than the original vinyl. I haven't tried to remove the letters yet since this was the first setup with this version. I have all the links in the plans. The original version was just for one use, but not sure about this one? I will have to check it out and make a video for it. Good luck!

@MakerDecor 20 күн бұрын

kzbin.info/www/bejne/nIbFo595lq-fZ7s

@ilhamalvainata 21 күн бұрын

What kind of material u use for that transparent glassy front side? And how to apply that? Gluing? Can u tell me info please 🙏

@MakerDecor 21 күн бұрын

Hi, I have a video that shows more of it here. kzbin.info/www/bejne/nIbFo595lq-fZ7s

@iamlatrice365 22 күн бұрын

The roofing still looks great! Even with none… what kind of lighting are you using?

@MakerDecor 21 күн бұрын

Hi, thanks I couldn't decide if I wanted to put one on or leave it off. Little bit more work. But just went ahead and put it on. For the lighting I just purchased some lights from Amazon. If you search (Shop Lights) a lot of different versions should pop up. Lot of options, pick the one that works best for your build. Good luck!

@iamlatrice365 21 күн бұрын

@ You’re welcome. Thank you for your response.

@sus8e462 27 күн бұрын

Great info on working with MDF & router & bit... Love this idea! Though one thought, align the guide to each line vs bit to line the guide to router--at least when you have extra you can cut off to fit (or leave area "open" and put shelves inside for storage, as well as nice display--pending planned use...).

@MakerDecor 26 күн бұрын

Thanks, that does sound like a great idea to leave open and put shelves. Great tip!

@lathera 27 күн бұрын

Good morning thank you for your videos I love them. I have a question So the 2 separate pieces you built in the end you said add hinges? Am I to take the hinges down every time? Or you're saying it's best to turn into a folding wall?

@MakerDecor 27 күн бұрын

Hi, I apologise I meant latch not hinges for the sides. I will link one down below what I mean. But you can kind of see it at the beginning of the video at the :07 mark on the white one. for the side. Just a latch to help keep it in place if you prefer. But I would wait till after you build it and decide if you need it. I never ended up adding it and did not have an issue using it. I hope that helps and please let me know if you have any questions along the way. Also sorry for the late reply. If you message the Etsy website I will answer a lot faster same day as I only check KZbin every couple of days. Good luck!

@MakerDecor 27 күн бұрын

www.homedepot.com/p/Everbilt-2-3-4-in-x-1-1-2-in-Bright-Brass-Chest-Door-Latch-2-Pack-28967/314151483

@splatpixel 29 күн бұрын

Cool and clean design. Good stuff.

@MakerDecor 29 күн бұрын

Thanks!!

Ең жақсы KZbin

Пікірлер