Zach, I came across your old VMAX on craigslist. I was interested in purchasing it from the current owner but I'd like to find out why it has a rebuilt title. Is that something you would be able to tell me about?
@dogzilla121210 жыл бұрын
Are you sure that it is the one I owned because, it did not have a rebuilt title when I sold it.
@markostrbac2410 жыл бұрын
hm strange. pretty sure thats the one. chicago.craigslist.org/sox/mcy/4756277651.html
@dogzilla121210 жыл бұрын
Marko Strbac aside from the exhaust it is totally different.
@dogzilla121210 жыл бұрын
Marko Strbac i looked at it again and it might be my bike. looks much different but it has the right tires and the same seat rip. I sold it 4 years ago so I dont know what it has been through. but when I bought it, it had been sitting for a long time. so I put in a new stator, pick up coil, and completely rebuild the carbs. It ran flawlessly. the only reason I sold it is because im 6 and 1/2 feet tall and just needed a bike with more leg room. as for the rebuilt title, if that is my bike then as of 2010 it was a clean title. can say what happened after. Vmax's are a ton of fun.
@markostrbac2410 жыл бұрын
Thanks for the information Zach. I might go check the bike out sometime this week. What would you think a fair price would be to pick it up for? I am the same height as well, what are you riding nowadays?
@GurrasGarage10 жыл бұрын
Wow thats really cool!
@dogzilla121210 жыл бұрын
thanks.
@aaronphillips976010 жыл бұрын
so is the operation of this pretty smooth? and it was kind of hard to tell in the video but do you have to lift the handle to remove from park? thanks for making this only video i could find.
@dogzilla121210 жыл бұрын
you only lift the handle to go into reverse from neutral and from reverse to park. from park to drive you can just go straight down. also if you hold the handle up you can go straight from neutral to park. and yes it is pretty smooth. its in my daily driver and I have no complaints.
@عبداللهعلي-ن7ع3ق8 жыл бұрын
What is the part numbe for this kit
@iamwolfie110 жыл бұрын
I thought when you push it down from neutral that was fist then you push it down again for 2nd then down again for 3rd or d
@dogzilla121210 жыл бұрын
Its the same as what ever shifter you already have in your car. Most transmissions are PRND21 but a reverse valve body trans would be PRN12D
@dogzilla121210 жыл бұрын
Its the same as what ever shifter you already have in your car. Most transmissions are PRND21 but a reverse valve body trans would be PRN12D
@william1633910 жыл бұрын
PLEASE tell me what kind of headers thos are? and what do you call them? i really want them for my 78. please respond thankyou
@dogzilla121210 жыл бұрын
they are fender well exit headers. these ones are headmans on a small block. but if you have a big block then headman and maddog make a set. fender well headers are the best. they are not in your way like regular headers, after you put then on you will never go back to the regular style.
@dogzilla121211 жыл бұрын
its been a while since I did them and I dont think I had to do anything. I might have had to trim the inner fender a little but im not sure.
@LscottD11 жыл бұрын
did you have to make any mods to install the headers?
@LscottD11 жыл бұрын
did you have to make any mods to get them to fit?
@dogzilla121211 жыл бұрын
I have had this one in my 79 F250 with a 429/C6 for over a year now and its worked pretty good. The only thing I did to it was pack the ratchet with thick bearing grease. Just to keep it smooth.
@dogzilla121211 жыл бұрын
you probably could you would just have to get a dirt bike style filter that attaches directly to the carb.
@jmsmikey11 жыл бұрын
Is it possible to romove the Airbox on the KLR?
@99kma11 жыл бұрын
Sounds mean as fuck!
@dogzilla121211 жыл бұрын
You might be right. I ended up selling the bike before it needed to cleaned again, so never looked at it. The shape of the airbox is such that it favors one side of the filter.
@GunGuyGallagher11 жыл бұрын
I just pulled mine out to throw it away. The metal cap effectively blocks 1/3 of the surface area and when I cleaned it I noticed that I couldn't feel air through the filter material when blowing on it with a blow dryer on high. K&N might be good for some situations, but not the KLR650. I think a Uni-filter would serve you a lot better. YMMV
@MrMightyZ12 жыл бұрын
Cheers
@dogzilla121212 жыл бұрын
Thank you.
@dogzilla121212 жыл бұрын
it probably could but I'm not sure why you would want to.
@GurrasGarage12 жыл бұрын
Sweet sound! Nice looking bike also :)
@WisdomVendor12 жыл бұрын
I went into mine and found a centering spring adjustment that I had to raise just a touch,, works great again.
@dogzilla121212 жыл бұрын
Its comes with a variety of different brackets for different transmissions. I installed mine on a C6. You just replace two of the bolts at the rear of the oil pan with longer ones to hold the bracket. I believe that you can download a PDF of the instructions from summit racing.
@dogzilla121212 жыл бұрын
I had a small problem with mine like that. It didn't want to grab second from drive. The cable had too much tension going around the transmission to the bracket. make sure that the cable has a much of a straight shot as possible. Hope this helps. If not then good luck.
@WisdomVendor12 жыл бұрын
I've been running one of these in my 68 Charger for about 4 years. Recently started giving trouble, it's not grabbing the ratchet mechanism regularly when going from N-D-2-1. Going to dig into it tomorrow.
@dogzilla121212 жыл бұрын
My friend Ian. Just pissing the neighbors off at night.
@REPURDYJ12 жыл бұрын
Whose car?
@CharSRT12 жыл бұрын
great vid, exactly what I was looking for. thanks
@scottclaxton636712 жыл бұрын
Thanks didn't even know this was avail. Exactly what I need! :)
@dogzilla121212 жыл бұрын
The release date has been pushed back due to production issues.
@REPURDYJ12 жыл бұрын
Whens the quad bike coming?
@damienjpierce12 жыл бұрын
Thank you
@dogzilla121212 жыл бұрын
@HDxLoki They sound just like the video, but better. The camera is only so good and its hard to describe sound with words. This truck has had glasspacks, delta 50's, and whats on it now (super 44's), as well I have heard my friends trucks with various other mufflers and these by far sound the best. By the way this truck also has no cats.
@dogzilla121212 жыл бұрын
@bubbaboggin08 Yeah, I have had the can off before but never made a video. I would go back and make one but I sold it last year.
@dogzilla121213 жыл бұрын
@FordMaverickFanatic They are Headman fender well headers, and yes they did rust out, I've had them for over two years and almost exclusively drive it in the snow/salt and rain. (ride my motorcycle whenever possible). I'm dew for a new set in the summer.
@FordMaverickFanatic13 жыл бұрын
@dogzilla1212 Oh, what brand are they? And have they rusted any since you got' em. She sounds beautiful lol, I wanna replace my leaky manifolds with these and get a hooker kit for duals and dump them before the axle...
@dogzilla121213 жыл бұрын
@FordMaverickFanatic Nope, they are not coated. They came in a generic black paint and I repainted them silver.
@FordMaverickFanatic13 жыл бұрын
$240 from summit? Are those coated, I need me a set...lol
@dogzilla121213 жыл бұрын
@Unknown9810 All three bikes were garbage picked and free bikes are the best kind of bikes.
@Unknown981013 жыл бұрын
i love how hes using 2 old Raleigh girl frames
@klc3500hd4x413 жыл бұрын
thats not to bad man got a dam good deal on those
@klc3500hd4x413 жыл бұрын
what did you pay for the fender well headers
@klc3500hd4x413 жыл бұрын
i woukd have left it if it sounded that good shit
@REPURDYJ13 жыл бұрын
You should put a 2 or 3 speed on the front and run a second chain to the rear wheel on the top bike and just put some useless contraption that spins when your pedaling
@moserdaposer22113 жыл бұрын
;]
@ImaNightElfMowhawk13 жыл бұрын
you extended the bottonm back frame ?! sooooo awesomeee
@REPURDYJ13 жыл бұрын
What part of cleaning your truck did you need a flat blade shovel for?
@navythomas813 жыл бұрын
notice any difference?
@REPURDYJ13 жыл бұрын
It might be the video but it almost sounds like the pistons are knocking?