Any problems with TB6560 drivers, like loosing steps or EMI interference problems?
@simojoundy67692 ай бұрын
Hey there, do you remember having engine hesitation on steady throttle ? like the rpm would go crazy and start going up and down ?
@jameslee5222 ай бұрын
@simojoundy6769 kinda. There were almost like dead spots. If I would slowly rotate the throttle, at some points the rpms would dip, then all of a sudden, pick back up. But that was a long time ago.
@simojoundy67692 ай бұрын
@@jameslee522 Oh okay, i have this issue on my 2015 R1 kzbin.infoLTg32cWBfMA?feature=share . You can see the RPM going up and down, and i noticed my tps skipping from 16 to 20 kzbin.infodav6Ckewzpw?feature=share
@karenmitchell58093 ай бұрын
Talk to the dog but no communication on what you’re doing. Hate videos like this
@timelevel516 ай бұрын
I have a 2010 Chrysler town and country with adjustable brake and gas pedal and all I did was push the control button to lower the pedals to the floor then removed the hood release lever. The heater core came out easily clearing the motor and pedals.Note the panel that covers the heater core hoses is tight but taking your time moving it this way and that it will almost fell out. To see everything easier and getting to heater core easier remove the bottom panel two screws on the bottom and one screw on the side.After that there was a steel panel with four screws .
@lydiamortiz77586 ай бұрын
Okay so what did you use and what was that machine lol 😂 🤦♀️
@jameslee5226 ай бұрын
Drywall puddy. The machine is a heat gun. All this does is speed up the drying process. Use to be able to get everything for under $50. Who's knows nowadays.
@johnbowen29638 ай бұрын
what a bloody useless video
@robertdixon73498 ай бұрын
Is a fluid change considered a service
@levi.j80479 ай бұрын
IS THE ELECTROC MOTOR NOT IN THE WAY !?
@miltgerds40889 ай бұрын
Thank you so much. You have no idea how much this helped.
@daniellegeasley966410 ай бұрын
OMG I need your help. I need the next 5 minutes after this lol I replaced the front heater core but it now pours our of the connection to the pipes. Should there be a gasket in-between the aluminum and heater core connection?
@jameslee52210 ай бұрын
Its been 10 years, But i believe it came pre-installed.
@cptfluke10 ай бұрын
It does work with synology nas, I'm using it with synology surveillance station 9.0 I also have several amcrest cameras and some looks better than other dependes on the model
@randywilson686910 ай бұрын
That big house on the hill was Rodney carringtons house he paid for the blacktop all the way to his house
@jameslee52210 ай бұрын
Yup!
@ralphbirdsell7231 Жыл бұрын
Wow dude you sound exactly like I do.. the way you pronounce words and the way you combine some words together.. its weird that we both have 4x4's I've got an 84 K5 blazer.. lifted..
@rogerdavidhuff Жыл бұрын
Fiber glass it
@alixandria7346 Жыл бұрын
You really didnt show how to dismantle everything...
@jimnewton5904 Жыл бұрын
Bingo the answer!!!
@JourneyOnLife Жыл бұрын
helped me too. My suv had this slop play since I bought it. I thought it was normal, haha. But my wife needed to drive it a few times and she was like "this is horrible, the stearing is loose!" Lol. I didn't believe her at 1st But she was so right. She told me, "get on KZbin like you did before many times and find out how to fix this!" Hahaha : ) I pray for you and tell your family you are awesome! : )
@edwardbreen7823 Жыл бұрын
Sorry brake clean good stuff
@jameslee522 Жыл бұрын
ya why not?
@edwardbreen7823 Жыл бұрын
How about cleaning the out side with break clean
@SMG59 Жыл бұрын
I have this same problem on my 2011 R1. Just touch the throttle and it jumps to 22 making it snappy as hell when going through town. not sure if it will be a TPS or the throttle motor.
@jaimeperez6332 Жыл бұрын
I’m from Chicago Illinois and I’m staying here in spavinaw for work and I already don’t like it, very depressing lonely village
@Kens1966 Жыл бұрын
I still own.this camera. Still.working had to put a.new SD card in in it
@sm8202 Жыл бұрын
Where is sd card location, been on the website and no info in the manual x
@Kens1966 Жыл бұрын
@@sm8202 you have to take off the lens. Be careful. Once you take off the front lense. Three screws hold the eye of the camera in. Slowly gently pull out the camera and you'll see the sd card slot. My camera finally quit working I had it for years
@Iss1015 Жыл бұрын
Hi is this the same for a Yukon?
@jameslee522 Жыл бұрын
Should be very similar. Check with your manual
@bluenosepe Жыл бұрын
I’m gonna go visit Spavinaw one day. All the way from the U.K. Looks like one of those towns where everyone knows everyone. In a good way. Any good pubs?
@junkmafiallcdmc4509 Жыл бұрын
Easy job, but the previous owner or whoever last serviced mine put in hex bolts, and the fill plug is stripped. How am I supposed to get it out??
@RodknockRhett Жыл бұрын
Bolt extractor.
@roseorchid7981 Жыл бұрын
My dog just ate our wall half inch into it thru the kennel he's in. I can fix the wall. I cant fix dog. Any help greatly appreciated
@luisdaniel75 Жыл бұрын
Hi, you think this work for a 2015 Buick enclave? And how does tighten a screw can fix the play in the intermediate shaft in first place? Thank you
@jammiedevaney Жыл бұрын
Is this the same for an 08 trailblazer?
@jameslee522 Жыл бұрын
Should be very similar,. Check your manual for the fluid type needed.
@jsin223663222 жыл бұрын
Well this was stupid.
@tomclose66432 жыл бұрын
hack
@O.World_RR2 жыл бұрын
Hi mate, it seems that switching the TB´s fixed your problem (stalling and rough iddle) But did you check if it fixed the jumping you had on DIAG 01 ? (16-20 / 16-23 - Previous video) Out of curiosity. Thanks!
@jameslee5222 жыл бұрын
I have since sold this bike, but yes it did fix the jumping problem as well.
@O.World_RR2 жыл бұрын
@@jameslee522 Hi there, Thanks
@greentwinturbobeast2 жыл бұрын
Nah..will weigh too much with all those 2x4s.
@blademaster27012 жыл бұрын
I have plans on making a bed cover for my ‘59 ford truck.
@Torch3141592652 жыл бұрын
Thank you. This is what i needed.
@julianbrizuela2 жыл бұрын
Transfer fluid apples only to 4x4?
@jameslee5222 жыл бұрын
the fluid change should be the same for an AWD. But you would need to look up in your manual the type of fluid that you need to use.
@angelf98002 жыл бұрын
Is this the same procedure on a 2008 Chevy trailblazer
@abdullahal-shimri30912 жыл бұрын
My dealership charged me $550 for 4wd service on my truck.
@jameslee5222 жыл бұрын
😥 now you know. Although I would hope they changed the front and back differential fluid as well for that price.
@lauraclark45422 жыл бұрын
Thank You for the video. We are always finding little places to explore!
@JScottTalbert-Lawyer2Warrior2 жыл бұрын
did you not have to remove the adjustable pedal motor? looks to be perfectly in the way...
@levi.j80479 ай бұрын
Literlsly the reason I watched this video and I don’t know how to remove it.
@BayJoua2 жыл бұрын
Do they allow gas boats on that lake?
@jameslee5222 жыл бұрын
There is a boat ramp, but i've never seen a boat on the lake. I do not remember any signs that said you couldn't.
@go_adventuring2 жыл бұрын
No. Water supply lake. Owned by the Mounds Water department
@mainstmechanical79322 жыл бұрын
@@jameslee522 the sign in your video clearly states no gas motors on the lake. It also lists the other rules.
@jhargrove11082 жыл бұрын
Carb cleaner works well for stuff like that.
@jameslee5222 жыл бұрын
Chemtool #1
@NorthSaintPaulNews2 жыл бұрын
Yeah that's right...Small particles normal for TC - No big chunks
@thatguyyouknow97062 жыл бұрын
I cant fucking see shit
@jeremyhoward21552 жыл бұрын
Avalanche?
@clydeespinosa62863 жыл бұрын
If my fill plug is stuck on can I fill through the top speed sensor plug thanks
@OSCARANDRES0393 жыл бұрын
Thank you!!
@LookInDJProduction3 жыл бұрын
best advice on the first, regarding fill plug, :) everytime when you need drain something,check out that you can fill it ..