That's sweet! I think a progressive full auto mode would be cool. Just like drills have a variable rpm based on how far you pull the trigger, I think It'd be sick to have a variable rate of fire with a similar idea. Don't know how the electronics would work but it'd be neat haha
@DoubleDiamondBack23 күн бұрын
You should make a nerf gun using the ryobi nail gun i think it's a good idea
@diplexnormal335315 күн бұрын
I don’t think it’s fast enough dude, you gotta at *least* have enough velocity to penetrate 1 inch into a nerf shield and be able to evaporate a small child. I’m just saying dude. 😕
@LimabeanStudios24 күн бұрын
One of the most phallic things I've ever seen but really cool idea. Feels like some form of shutter-like valve to restrict air flow should help you get away with shorter barrels.
@grape848Ай бұрын
were to get drum mag
@CCOstrom29Ай бұрын
Do you have files for this? Or are they publicly available
@donutcat0Ай бұрын
They'll be released after I'm able to rework them for official Brushless Noidcore release.
@Giosuke_GiogashikataАй бұрын
You cannibalized the right power tool because the sound of that burst into the target and my eardrums! I’m scared to be shot with this, excellent work.
@_Sho_oKАй бұрын
This is cool dude! I'm imagining a minigun version for this with that Rof
@mateomangoplaysstw7710Ай бұрын
You need to add some ridges to that belt to grip the dart!! Maybe 2 will do
@CallmehatsuneАй бұрын
Maybe more tension on the belt will help grip the darts more
@45hr52Ай бұрын
This is cool engineering, good job 👍🏻 On a side note you should make the bullet red that will make it pop out more!
@aelsi1337Ай бұрын
the barrel extension is the way to go, figure out what length of barrel it takes to reach max velocity
@Steve91LАй бұрын
would there be a way to by-pass the air until the fan is up to speed? the longer barrel definitely will help get the speed up
@GPN007aАй бұрын
Some very lonely women would buy this off you as is. I see mass market potential with the possible finished product
@robmicheal511Ай бұрын
Im sorry but what could possibly be the application of this? There are way more efficient ways to move something through a tube.
@zacharyjefferies9965Ай бұрын
It would appear that he is attempting to have some fun, Rob.
@robmicheal511Ай бұрын
@@zacharyjefferies9965 I didn't mean to come off rude or condescending that's why I added the apologies to start but I can see how that could come across wrong. I'm genuinely curious what the application for this is. given there are better options for such a device, unless there is a specific purpose or idea for this design.
@zacharyjefferies9965Ай бұрын
@@robmicheal511 yeah I was just poking fun at you. I'm curious too!
@Steve91LАй бұрын
he is shooting a big nerf dart. i am guessing using compressed air may be to cumbersome to be move around
@NinjahatАй бұрын
Dude, that looks like a fleshlight 😅
@davisrayАй бұрын
Make it human-size, and get into it. Dont forget wear helmet, safety first!
@senoraliАй бұрын
Dude, build this thing so I can buy it from you.
@ulysses-101-Ай бұрын
sick
@blendervendor22202 ай бұрын
oh damn... I'm here for this thing. Can't wait until It's finished lmao
@cosmonious2 ай бұрын
I love this thing so much! You are awesome for making this! I wish I had thw no how to make a DeWalt one.
@xeno44152 ай бұрын
I love how it originally stems from a nail gun lol
@ryanmetzke85342 ай бұрын
Do you have the files/ code available?
@donutcat02 ай бұрын
Code is available at github.com/DonutCables/Brushless, files will be released when official brushless Flycore/Noidcore is released
@xfoxgames3 ай бұрын
any issues with heat from the motor breaking?
@donutcat03 ай бұрын
Not so far. They used to get hot at 100% power, but at the 45% or 75% I usually use they stay cool enough for the PLA mount to be fine.
@xfoxgames3 ай бұрын
@@donutcat0 great to know, thx
@HudsonPummell-im2th3 ай бұрын
Who let this man cook
@HudsonPummell-im2th3 ай бұрын
Wtf
@jonathanrichard5823 ай бұрын
Whats the fps on the thing
@donutcat03 ай бұрын
That was about 50% power, so probably around 170-175fps
@jonathanrichard5823 ай бұрын
Daaaam sooooon thats a lot of damage
@jonathanrichard5823 ай бұрын
This thing is nuts looooool i was expecting to buy a kit when i saw that
@jonathanrichard5823 ай бұрын
Looool
@BasicNerf3 ай бұрын
What cause the stuck breach on the blaster? And how hard was it to fix?
@donutcat03 ай бұрын
The pusher return spring can slip up over the pusher tip and then be shoved into the breech where it'll be stuck once the plunger slams it into place. It comes with some material glued in place to prevent this, but this one seems to have broken that material. In addition, this one arrived with the barrel adjusted much too far back into the receiver so darts weren't aligning with the breech and getting crushed as they were fed.
@yeoldenuggetmcree94632 ай бұрын
@@donutcat0 i recently bought one and have had a similar issue where my darts will get jammed and shredded in the breech, what was the fix for this? currently ive just found that a few cycles will fix it
@donutcat02 ай бұрын
@@yeoldenuggetmcree9463 I'd try adjusting the barrel forward some, having it too far back in the breech area will cause darts to catch on it as they feed and fold more easily.
@Ch33seYT3 ай бұрын
tie 3 of them together, link the triggers
@SheltonShoots3 ай бұрын
Nice! That thing looks sick!
@Check_Your_Hopper3 ай бұрын
Where can I get those bunkers? lol
@donutcat03 ай бұрын
Search for "Gigatent Pop Up Pod" and that's actually them. They're a little unstable at times, but they pack away super compact so they're great for being able to store them onsite for indoor games.
@Check_Your_Hopper3 ай бұрын
@@donutcat0 thanks bro
@d_rich934 ай бұрын
Hmmm I have a couple Milwaukee drills laying around
@somethingsomething90814 ай бұрын
That is an amazing creation! Those internals are so clean and compact!
@Sharpdeath845 ай бұрын
So good, keep it up! Looking forward to more demos!
@Demonanimator5 ай бұрын
Dude this is bad ass. I'm a huge fan of incorporating power tools into my Nerf Mods and this is definitely up there with the best I've seen. Good work my man!
@samdavidson64835 ай бұрын
Cool blaster man.
@mokaPCP5 ай бұрын
Oh wow okay good stuff
@jamesthecrazyengineer84265 ай бұрын
What does the tool do?
@digitalben4205 ай бұрын
This is an incredibly impressive mod sir. Well done!
@digitalben4205 ай бұрын
Holy fuck.
@skeemeastwood90756 ай бұрын
Thats so overpowered its awesome. Nice job man.
@Gamerguy10yt6 ай бұрын
i need the files.
@Cinematographist216 ай бұрын
Nice build, look forward to more of this
@jonathonabel15486 ай бұрын
Ive got a few ryobi tools laying around is there a link to how to do this or is it custom?
@donutcat06 ай бұрын
Pretty much completely custom aside from modifying some existing files for the non-tool portion of the build. Long-term I am looking to get more info out on putting something like this together, as well as some files and maybe parts kits for specific models.
@blendervendor22206 ай бұрын
sweet
@everythingeverett30216 ай бұрын
nice
@nicecoofunguy6 ай бұрын
love the build please post battle videos/reactions lol
@donutcat06 ай бұрын
I'm gonna try to borrow an actioncam of some sort for Sub Zero Blaster Battle to get some gameplay footage