Dima Zadorozhny

Пікірлер

@RobertoDiAguiar 2 ай бұрын

Very good

@AnzuPazuzu 7 ай бұрын

beautiful music and beautiful video😢

@Kellzbellz25 7 ай бұрын

First

@jaka2274 Жыл бұрын

is the extra foam in the tape really necessary? Also, i will have to move over the original head a little to the left to make the external head fit. The initial rec/play head being verry near to the the eraser head, can that cause problems? Due to the electromagnet in the eraser maybe interfering with the rec/play head i mean... (The tutorial is really damn great, i like the project!)

@storm_clouds 10 ай бұрын

The foam helps the heads make good contact with the tape. That part is very finicky unfortunately. Regarding the erase head interference: I'm not sure! Good luck

@jacobsteel 3 жыл бұрын

Great work! Thank you!

@MoFiTheMagnificent 3 жыл бұрын

After this mod, are you still able to use regular cassette tapes on your tascam?

@storm_clouds 3 жыл бұрын

No, sadly

@tapeexperiments 3 жыл бұрын

Sounds Lovely👊

@GeorgeGeorge-xj2bc 3 жыл бұрын

Nowadays a PT2399 chip that costs under 1$ with few other components that not exceed 5$ total can make it.

@gabet3754 4 жыл бұрын

Sounds like an EQD pedal. Nice

@virensoni2970 4 жыл бұрын

I want this device

@ocean457 4 жыл бұрын

I've just read your instructables...So much work and talent you put into this. Precious brother! Cheers! And the sound is magnificent

@JSprayaEntertainment 4 жыл бұрын

wow .. ok .. skillz , kzbin.info/www/bejne/fqqkaWaud7Zpjac

@CJIeDonbIT 4 жыл бұрын

Можешь такой же сделать? :D

@storm_clouds 10 ай бұрын

Эти записывающие устройства Tascam становятся все дороже, и их все труднее найти. Рушить их, честно говоря, жалко, это реликвии. Некоторое время кто-то продавал подобное устройство, сделанное на магнитофонах Marantz, но они прекратились, так как запас рабочих рекордеров подходил к концу (думаю)

@jthek2000 6 жыл бұрын

How hard was it to re:in/re:out the pot trimmer w/ a 5k pot? I will try it

@cooliofoolio 6 жыл бұрын

Ohhh god, does that Walkman have a record head too?

@storm_clouds 6 жыл бұрын

No, the combined play/record head from the walkman was taken out and superglued onto the 4-track's head.

@resonansiruang 6 жыл бұрын

wow..this is great!are u make this with tape loop?

@storm_clouds 6 жыл бұрын

thank you! no, it wasn't featured on this one

@porksoda2342 6 жыл бұрын

DAMN

@alexmiranda7886 6 жыл бұрын

What kind of Walkman did you use? And did you press the record function or just the play button on it?

@storm_clouds 6 жыл бұрын

It was older... I think a Sony. Just play, not record.

@alexmiranda7886 6 жыл бұрын

Can you still use this as a normal cassette player?

@storm_clouds 6 жыл бұрын

No, the tape won't fit

@NiamorH 6 жыл бұрын

sounds great!

@KiR_3d 6 жыл бұрын

Интересно звучит! Понимаю, что это будет не то, но по качеству у PT2399 будет сравнимый звук? И сколько нужно чипов в цепочку, чтоб получить такую длинную задержку, если известно?

@storm_clouds 6 жыл бұрын

K sozhelenie, ya ne znayu nechevo pro chipov i takzhe yeli o elektronike v obshe...! etot experiment menya nauchil vse shto ya znayu

@KiR_3d 6 жыл бұрын

это не так сложно... если охота "нырнуть" в это, конечно.

@giuliotisato8965 6 жыл бұрын

How can you generate such a long feedback? I'm trying to make my own one tape delay but until now what I obtained is just the slap back repetition because of the second head. Do you run the delay into an external mixer?

@storm_clouds 6 жыл бұрын

Are you using the Portastudio? Make sure the channel with slapback is switched to record mode.

@giuliotisato8965 6 жыл бұрын

Dima Zadorozhny Yes I'm using the porta 02. Actually, for the second head, I tryed with a regular tape player (walkmam) but it hasn't the record mode. Could that be the problem?

@storm_clouds 6 жыл бұрын

Set the walkman to "play." The output of the walkman should be going into the porta 02, and that channel should be set to record to tape

@giuliotisato8965 6 жыл бұрын

I've finally menaged it! The problem was the position of the walkman's head: I've removed it, re-soldered it (focusing on the alignment between the heads) and somehow it has started to work. Thank you man, for real! Now I've a very funny toy. However, my delay's output signal is very much distorted rather the your. Maybe it depends by the walkman/tape's quality. What do you think about?

@alexfield4041 7 жыл бұрын

я так и знал что ты русский))

@Jack-eu5vu 7 жыл бұрын

Anyone know the tascam model he's using?

@storm_clouds 7 жыл бұрын

Porta 02

@Francisco12G 7 жыл бұрын

It sounds really good, dope!

@paultasbeeb 7 жыл бұрын

love it

@lepistanuda 7 жыл бұрын

man do you like Duster?

@storm_clouds 7 жыл бұрын

YES I DO

@lepistanuda 7 жыл бұрын

I knew I recognised that shell maj7 chord haha

@testrecone9083 7 жыл бұрын

A tone is very beautiful

@DaveZula 7 жыл бұрын

Really cool sound!

@freakyfadge 7 жыл бұрын

Loveless cost 250 grand, when they could have just used this.

@saintjabroni 3 жыл бұрын

$250,000 to make the record Loveless??

@freakyfadge 3 жыл бұрын

@@saintjabroni British pounds... so even more

@saintjabroni 3 жыл бұрын

@@freakyfadge Crazy to see that number in writing...just crazy. Long gone are those studio cost days. Pretty damn much, no?

@freakyfadge 3 жыл бұрын

@@saintjabroni I don't know, recording digitally probably saves cost on tape, but I think it was the sheer length of time they spent in the studio is what made it so expensive. They were in there for 2 years non-stop from what I gather.

@saintjabroni 3 жыл бұрын

@@freakyfadge 😅🥲😰😭🤣

@eddiegomez4134 7 жыл бұрын

Dude that is awesome! I found a teac model 124 cassette deck today going to see if i can make something similar.

@cassiusnymh 7 жыл бұрын

Hi the link is for a cat tent? Can you reply with link again please! Cheers :)

@storm_clouds 7 жыл бұрын

hey, which link? the link in the video description seems to work

@ge200099 7 жыл бұрын

cassius nymh a cat tent isn't that bad :)

@Bazabuza1 7 жыл бұрын

MAKE A BETTER AND MORE CLEAR TUTORIAL PLEASE!

@storm_clouds 7 жыл бұрын

yikes. what would make it better?

@storm_clouds 7 жыл бұрын

you might enjoy this project/tutorial keepdevelopingprojects.wordpress.com/category/tape-delay-pedal/

@Bazabuza1 7 жыл бұрын

Sorry about the dumb comment,instructables.com wouldn't load the pictures on my phone where i looked at the tutorial at first.Without the pictures the parts where you use foam to adjust tension of the tape loop and where you put a pot in the circuit of the motor to have a speed modifier are really vague.I wish the part about the foam and tape loop tension was more straight forward. Keep up the great work,i love this.

@vanessalouzon 7 жыл бұрын

woah!

@rot_studios 8 жыл бұрын

That sounds pretty damn cool, with all the little artifacts, wow and flutter :D

@explodingPSYCH 8 жыл бұрын

I've been thinking about doing this, but using another 4 track head so I can do real time transfers from a four track. Do you think I'd need to do any additional mods to get it to playback only the play head WHILE recording from the record head?

@Goodbye_Horses 8 жыл бұрын

Would this work with 4 pre recorded "tracks" on a loop in the 4 track? As opposed to running a guitar in.

@storm_clouds 8 жыл бұрын

nope, but you could use a second 4-track as the input if you wanted to?

@Goodbye_Horses 8 жыл бұрын

yeah that's what i was thinking was the case. Had to ask! thanks

@almohadillaseisefes 8 жыл бұрын

loving those little motherfuckin artifacts.

@MichelDbar 8 жыл бұрын

Дима, привет! А у тебя есть инструкция на русском?

@storm_clouds 8 жыл бұрын

к сожалению я не говорю достаточно хорошо... может кто то захочет перевести?

@MichelDbar 8 жыл бұрын

Dima Zadorozhny Привет! Все равно, спасибо за ответ!

@russwilson2305 6 жыл бұрын

Took the words right out of my mouth!

@TheTurtleneck64 8 жыл бұрын

If I made this with a mixer and two cassette recorders, what wires/cables would I need? Assuming the recorders have standard headphone jacks and the mixer has 4 inputs and 1 output. And for the recorder head (or whatever) that will be moved, and the speed control potentiometer? I've never done ANYTHING like this before.

@geecen 8 жыл бұрын

Thanks for this! Sounds awesome.

@Do-op6sy 8 жыл бұрын

Это потрясающе!

@RAFAELLO077 8 жыл бұрын

do you by any chance know, i have a 4 track porta, and would love to do a mod to slow the speed down, any help ?

@storm_clouds 8 жыл бұрын

+Rafael DeSade Check out Step 5 of my tutorial

@fugamantew 8 жыл бұрын

You genius!

@Seems_like_mountains 8 жыл бұрын

Can i ask you how you made up the audio in the first 10 sec of the video?

@storm_clouds 8 жыл бұрын

+seems like mountains Just strumming some chords

@Seems_like_mountains 8 жыл бұрын

thank you, i'm gonna try to build this beauty! Great video!

@storm_clouds 8 жыл бұрын

+seems like mountains awesome, thanks. Let me know how it works out!

@Origoangelohrol322 8 жыл бұрын

Excellent but you should work on the tape speed stability. It's poor now but can be better.

@storm_clouds 8 жыл бұрын

+Origoangelohrol322 Yes I have it more stable now since this video was recorded. I'll make another video showing some other improvements soon

@Origoangelohrol322 8 жыл бұрын

+Dima Zadorozhny If you make different configuration of the heads you'll get higher delays with higher tape speed which means better stability and high frequency response because as you can hear when you lower the tape speed too much to get higher delays you get very dull sound. I think of configuration like that: first playback head, then the erase head and after it the record head. That way you'll record the sound, and it'll pass the whole loop of tape and after that it'll be played back. Then immediately after that it'll be erased and recorded the new sound. The drawback is maybe that you won't be able to achieve very small delays in this configuration.

@compulsor5853 9 жыл бұрын

Oh- and then creating and SHARING the how-to with the (rest of us) great unwashed? You win president of sciencey stuff or something.

@compulsor5853 9 жыл бұрын

Genius on so many levels. Most impressive is your choice of the foundational device. Proven reliability, availability, user familiarity!!! It leapfrogs most major impediments to implementation, serving, modifications etc etc. Finally, cleanly and wonderfully executed, and sonically spot on.

@animanoir 9 жыл бұрын

the intro is lovely

@weeg91 9 жыл бұрын

Why spend 10k on acoustic treatment, or 1k on digital delay when you can do it this way for next to nothing.

@louisrobertbrown 8 жыл бұрын

+weeg91 why spend 1k on digital delay when you can spend 1/10th of that?

@storm_clouds 8 жыл бұрын

+Louis Brown I mean, there are lots of really good reasons to own other types of delay effects, digital or otherwise. This is just a fun little project for people who like weird sounds

@louisrobertbrown 8 жыл бұрын

+Dima Zadorozhny I understand that, I just thought the commenter set up a false premise

Ең жақсы KZbin

Пікірлер