Osha10 Spanish
0:18
7 ай бұрын
iFTI LMS Webinar 2
1:15:55
8 ай бұрын
iFTI LMS Basic Features Webinar
1:54:01
iFTI Tour
2:33
Жыл бұрын
iFTI Tour
2:33
Жыл бұрын
Opaci-coat
4:59
2 жыл бұрын
P3Tec Commercial Installation
1:25
3 жыл бұрын
P3Tec University Housing
1:55
3 жыл бұрын
P3Tec Abrasion
2:23
3 жыл бұрын
P3Tec Chemical
3:14
3 жыл бұрын
P3Tec Impact video
1:39
3 жыл бұрын
P3TEC Product Benefits
0:57
3 жыл бұрын
COVID 19  06112020 0
2:04:40
3 жыл бұрын
ChangingtheCulture Zoom 08272021
1:55:59
iFTI LMS Learning Path Reports
4:44
3 жыл бұрын
iFTI LMS Groups
23:53
3 жыл бұрын
iFTI LMS LearningPath
18:39
3 жыл бұрын
Пікірлер
@nicolethompson3276
@nicolethompson3276 4 күн бұрын
Do you do the test all Together! So you don’t fail. The same as they do it in person?
@Ladymusicc
@Ladymusicc 20 күн бұрын
Super helpful video and straight to the point. Thank you!
@gianthills
@gianthills 2 ай бұрын
This spinner is a keeper. I am a full time painter and no matter how much brush cleaning you do by hand with a wire brush and shaking it, you'll never be as fast or as thorough without also using a spinner. Just used it for the first time, and no issues. Got the brush in without a problem, and it spins with a lot of speed and no wobble. I got this one because I had just wasted money on garbage - Bennett - that doesn't work. I couldn't even get the brush into the thing without assistance. I had assumed it must be good, at least functional, otherwise Home depot wouldn't be able to sell it. I was wrong. I thought maybe there was a way to adjust it, that I must be doing something wrong, but no, this was just garbage that should never have been accepted to the market. Don't make my mistake. Just go for the Purdy.
@JohnYegres-ii8ts
@JohnYegres-ii8ts 5 ай бұрын
donde estan ubicados?
@JohnYegres-ii8ts
@JohnYegres-ii8ts 5 ай бұрын
soy tecnico en electronica y en mi pais he reparado muchos de estos equipos
@blackrifle6736
@blackrifle6736 7 ай бұрын
*Thank you and Wooster for this product tutorial. Clearly informs this DIYer that Wooster innovates and Purdy imitates. Cheers!*
@charlesviner1565
@charlesviner1565 8 ай бұрын
Hello 🎨✌
@elkinspainting1
@elkinspainting1 8 ай бұрын
The school video has to teach the guy how to use and grab the roller the right way while pasting the WP on the table...lol
@fauxit55
@fauxit55 Ай бұрын
That type of rolling technique is much easier on your shoulder over time. That's why they teach it that way.
@meadroad
@meadroad 10 ай бұрын
After purchasing one of theses, it only fits 1 1/2 inch sleeves not 1 3/4 what 99.9% of UK decorators use… complete waste of money 😤
@Josebombs
@Josebombs Жыл бұрын
thank you! really solid info here. i feel more confident operating this model
@stem50
@stem50 Жыл бұрын
The Toe of my Boot is Cheaper to use...........
@mattneil7825
@mattneil7825 2 жыл бұрын
Doesn't fit my Purdy sleeves
@jolanmostert883
@jolanmostert883 2 жыл бұрын
Can you use it for walls
@southtxroughneck113
@southtxroughneck113 2 жыл бұрын
how many hours a day was this course?
@1Patient
@1Patient 2 жыл бұрын
Looks good, fill 'er up 😃
@1Patient
@1Patient 2 жыл бұрын
I'm glad this video made the Honors List 😃👍
@ABDULLAHMALIK
@ABDULLAHMALIK 2 жыл бұрын
Thank You! It is a nice awareness video
@luistello1971
@luistello1971 3 жыл бұрын
Thanks for putting this together. This is a nice overview.
@rcruzz5
@rcruzz5 3 жыл бұрын
I tend to back flush the paint line before running thinner through the line… I think it uses less thinner. But that’s just me
@jonlejune2977
@jonlejune2977 3 жыл бұрын
Thanks
@dscordobab
@dscordobab 3 жыл бұрын
What solvent and respirator is he using? Thanks.
@davidgagnon2849
@davidgagnon2849 3 жыл бұрын
Yeah. I was wondering the same thing. Shellac is thinned with Denatured Alcohol, but it would be helpful if they'd talk about how much they used; Ratio.
@MrMastermason82
@MrMastermason82 3 жыл бұрын
How many weeks is the class
@jeffslegacy
@jeffslegacy 3 жыл бұрын
Here in Washington it is a 4 day class at the UW university. I am enrolled in it next week as a matter of fact. Decided to look it up on KZbin and came across this video. Very informative and just gives me more information to sink my mind into on my drive to and from work lol.
@rickmontes4367
@rickmontes4367 2 жыл бұрын
@@jeffslegacy did you pass
@jeffslegacy
@jeffslegacy 2 жыл бұрын
@@rickmontes4367 yes I did! It wasn’t as hard as I thought it was going to be. I really feel the course made it easier to navigate OSHA regs! I enjoyed it! I was going to sign up for OSHA 500 but didn’t have enough hours in the safety realm to qualify this time around.
@rickmontes4367
@rickmontes4367 2 жыл бұрын
@@jeffslegacy yeah after this I would go for 500 but I don't have many of their prerequisites. I'm coming out the field into this and I'm going to do everything I can with it.
@jeffslegacy
@jeffslegacy 2 жыл бұрын
@@rickmontes4367 Yeah same here. I worked in the field as a steel stud framer and drywaller here WA. With 500 you have to have safety related experience not just working in the field. But I am doing other things such as I became a 1st Aid/CPR Intructor, and I am working on receiving other instructor certs so that I can train our employees in house!
@MBSK-xw4ff
@MBSK-xw4ff 3 жыл бұрын
,,,,,,,,,,,,,,,,,,,,,,,,You're the best teacher! Thank you so much,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,///
@ryap02
@ryap02 3 жыл бұрын
Hello. At 33:09, what was the 298 page PCB Navy document Wayne mentioned?
@perfectlessons
@perfectlessons 3 жыл бұрын
Thank you!!
@parveshv.merchant9806
@parveshv.merchant9806 3 жыл бұрын
Is there a video of how to use the 6-12 extension Pole for beginners?
@losttheplot26
@losttheplot26 11 ай бұрын
Lol. Down and up. No bending down
@salmangeri01
@salmangeri01 3 жыл бұрын
Disposable liners for the Wooster paint buckets can be found on Amazon or valley pro products. Cuts clean up to one minute.
@briangallaugher3068
@briangallaugher3068 3 жыл бұрын
Only 132 where you guys at? I'm at a loss at participation #DC57
@lexandersantana8089
@lexandersantana8089 3 жыл бұрын
This is the most legit brush cleaning video I’ve ever seen
@lexandersantana8089
@lexandersantana8089 3 жыл бұрын
I’ve had the same Wooster roller tray for 10 years, it just works
@learningwithjannatulferdus7898
@learningwithjannatulferdus7898 4 жыл бұрын
Which brand is best .could you tell me brand of Wooster and purdey top product name please.?
@spamjam6298
@spamjam6298 4 жыл бұрын
stay away from purdey the brand and the items went down hill after Sherwin Williams bought them. stay with Wooster. im a painter of 25 years plus. only thing I like of purdey is the 3/8 colossal roller cover and it sheds like crazy but after 3 uses its the best..
@gailremp8389
@gailremp8389 3 жыл бұрын
OK I have practically beat a hole in the side of a gallon of paint can -- I'm gonna have to go in the garage and find something more sturdy before I end up with a gallon of Behr paint all over my entryway floor. Crap I must be doing something obviously wrong. Know I'm am a girl, but I should be able to figure this out.. we can make babies and birth babies we should be able to get a rare off the end of a Worcester pro 4 1/2 inch roller. Sheesh.
@seabass22
@seabass22 3 жыл бұрын
@@gailremp8389 lol. I had the same problem on my wooster 9 inch roller and the mini 4 1/2. At least they stay on and don’t come off on the wall! I use my roller spinner to hit the frame on since it is metal and sturdy. I just saw a 4 inch standard diameter roller and frame today and bought them. Probably a waste, since I already have the jumbo with light green grips, that will work with purdy rollers. As for purdy, I like their clearcut brush. And their woven white dove rollers. That’s about it. I also got a brush tool they make that cleans brushes as well as the big and small diameter rollers.
@gailremp8389
@gailremp8389 3 жыл бұрын
@@seabass22 Thank you for your response. There's so much bad stuff going on in the world. The fact that I tried to beat the crap out of the roller which is one of them. I was at Home Depot and I talked. to Bruce who is one of the guys in my store that knows what he's doing. And I said how in the hell do you get this thing off beating it on the side of a can. So we went over and we grabbed the one that I was complaining about and he beat it twice on the side of the beam at Home Depot. And that worked. So I guess I'm supposed to just go back to Home Depot and beat the crap out of it on the side of the beam. Ha ha. Oh boy.
@seabass22
@seabass22 3 жыл бұрын
@@gailremp8389 lol the cans are real flimsy. Try a 2x4.
@scottslater4081
@scottslater4081 4 жыл бұрын
2833019#
@juancarlosanazcopazos1248
@juancarlosanazcopazos1248 5 жыл бұрын
Signals for crane play.google.com/store/apps/details?id=com.fjapps.juanc.senalesgrua It shows the signals used by crane rigger, in addition to knowing the safety systems and preventive measures against tipping and electrical risk to use in the cranes.
@SandeepSingh-ol7fv
@SandeepSingh-ol7fv 6 жыл бұрын
+919815881226 w a p
@SandeepSingh-ol7fv
@SandeepSingh-ol7fv 6 жыл бұрын
+919815881226 w a p
@SandeepSingh-ol7fv
@SandeepSingh-ol7fv 6 жыл бұрын
Call me ser reeger
@2RQMusic
@2RQMusic 6 жыл бұрын
love the ZMac hoist,, too bad you dont carry them anymore
@vishalgoud1935
@vishalgoud1935 7 жыл бұрын
Nice one sir It would be more useful if complete installation with proper guide was shown..
@meowdora1615
@meowdora1615 7 жыл бұрын
I only have one question for you which is How To Quit international union of painters and allied trades? Please answer me with short and efficient words, please don't answer me anything else. I will really appreciate your help.
@Fernandoiupat
@Fernandoiupat 12 жыл бұрын
Great stuff