Will it work for 2004 sequoia?

Nice man looks greaTUH!!

Nice to see your clock insted of the wire

Doesn't work for 2008 Toyota Corolla. I don't get the solid red light.

Was your engine light on before you cleaned the maf sensor

Thank dude I have this same quad and it wont start priciate you man❤

So at the beginning of the video you said the bumper was technically 3 parts, but it all comes off as one whole piece. Is it possible to take out just that middle section of the bumper, and leave the 2 ends separate. Trying to weld a new back bumper but don't want to replace the whole thing.

Nightmare ideas from youtube non qualified.

I have a 2007 rav4 v6 limited. i got the lock n unlock to work, key turns cranks but doesn’t start. I followed your steps with my single master key. I can’t make the security light to stay on solid for programming mode.. (bought to key and cut them) the work just not to start up vehicle because of chip..

2011 rav 4 is the pink and red wire

Which ones are upstream/downstream?

same process for the grey valet key?

To change it do you have to change the oil?

i cant figure it out on my 2006 rav 4, its a key fob...would that not work?

Duuuuuuuuude. Saved me $300 from camelback Toyota in Phoenix

How did u hook up ur little fuel filter

99 T SIENNA...DIDN'T WORK ON EITHER. WORKED YESTERDAY?????

looking to add some D-rings to a Sea Eagle SE 370. Sea Eagle says that the 370 does not support the glue on rings or straps.

Didn’t work for me

Thanks for addressing the non air filter side. No other channel does that

I’m not sure why this video was made because nobody in the right fucking mind would ever paint the Sti blue seats and door cards. Those are some of the most highly sold after items that were only in a few year models and you just ruined them. So congrats….

Pe modele mai noi aveți și cheia de pornire. Așa că este riscant sa umblați acolo.

I got the sensor code 22500 and where is it friend, I loved your channel

Does it work in the Lexus line up to? I have a 2011 RX350 and I'm tired of dealing with the light.

What about p0155? Which one is that?

Use a light next time...

mine doing same thing with a brand new carb i try to lower the jet at minimum but didnt change a thing

The ones you show on the video aren't the same in the photo description

Can you send the pictures od where the oem alarm is located

I haves this key at my dads 2017 4runner

How much weight can one D-Ring hold?

Worst how to video of all time

hi, did youhave to adjust the camber after installing the tacoma shocks?

My TPMS module is behind the glove box on a 3rd gen Prius. Do you know which two wires to splice together on that one?

Does it lock and unlock with the tailgate?

Thank you for help just done on 2006 4runner. No more flashing Tpms light

I tried it more than five times on my Tacoma 2009 it didn’t work

I have a 05 toyota 4runner sr5 AWD v6 is it possible to put ATF WS in it? I have cases of that fluid lying around in my garage.

3 Sensors, yet they're sold in pairs. Go figure.

what about the door lights, when you open the door, not sure what those area called. Just wanted to ask about size

At 1:47 in the video, does anyone know what those pins are called? My right one is missing and the whole right side of my bumper is coming off slowly.

How do u get out of programming mode

Update, my air was cold while the car idled but as soon as I drove the heat kicked in As soon as I idled again it went back to cold air 🤷🏻‍♂️

Thanks for helping but I cleaned the sensor It was dusty but that’s all Is black the correct color for the sensor?? I get cold air on Hi But if I turn the heat on and off a few times the heat will kick in Any tips Thanks

is it stiffer than the original 4runner shocks?? did you feel road vibration ?

I have a 2012 rav4. In my vehicle the tpms module is right behind the glove compartment. I was afraid the splice might cut through both wires, so I inserted a wire into the back of the plug to connect the pink and red wires. One end on the pink wire, and the other on the black wire. Stranded copper wire isn’t stiff enough to push in, so I used a short piece of small single strand wire. It had enough stiffness to be pushed in next to the pink and red wires on the back of the plug. Worked like a champ…the light is gone.

One thing to watch is grease on the end of the Caliper Guide pins. Grease does not compress. Thus grease on the end of the guide pin can can prevent the pins from going all the way in the cylinder, and possibly lead to your brake pads wearing unevenly if one pin compresses and one pin does not.

You have to make sure if the master key has a dimple in it (at the base of the blade where it goes into the head), you need to get a spare that has the dimple, I had one that said 'G' on it, I had to find a blank with a 'G' marking, it has to do with the chip inside the transponder, they must be of the same kind. I hope this helps someone.

I played this as a kid

Please can you tell me where is located the TPMS module on a 2010 Matrix ? Is it the same module orange in color ? Thank you for sharing your knowledges .