Lol same thing just happened to me...total loss wish had a fire extinguisher close by
@james1023772 күн бұрын
That sucks. Yea it ended up being a loss for me too
@TurdCurdle2 күн бұрын
@@james102377 yah now we have to worry about even the name brands being Chinese knockoffs, people are now basing their opinions on the quality based on the price
@everettpittman353620 күн бұрын
I bought a all aluminum one for my 05 H2 it runs so much cooler new water pump hoses T stat belts coolant and water conditioner as well makes it run even cooler
@james10237720 күн бұрын
I had a new water pump installed 15k ago so I should be good there. My hoses all feel pretty good and look good. I have a new set but couldn't justify installing them. Took me two nights but I got it in and also replaced my condenser at the same time seeing I had a new one sitting in my basement for 2 years as well. I did run into another issue while I was heating it up to get the air out. One of my expensive stage 4 extreme cooling fans apparently had stopped working. I was pretty pissed after all that work because now I had to take it half apart again to replace the fan motor because of the ties that hold the bottom in and the fan itself has to be removed from the shroud via the inside to replace motor. On the bright side they have a lifetime warranty so I emailed the company the other night when I found it and next day they sent me out a new fan motor and ties which will arrive today. I've put so much work and money into this thing. I'm still paying the debt off even though I own it free and clear.....lol I'll have to do a video of my recent upgrades after. I aslo installed cognito idler and pitman arm supports a couple weeks ago.
@JackSmith-fj6sn24 күн бұрын
I find it hard to believe that those holes are not metric. Hopefully someone will come out with pic rail with needed screws. Think 3 or 4 holes be better. Just go to a gunsmith and do it right. Looks to me like we are just spinning our wheels here with these adapters.
@james10237724 күн бұрын
Yup. The two holes don't line up with anything I've bought. I guess 2 single pics might work too but still getting the right screw is impossible and drilling pics again. There's only 2 gunsmiths around here im the city and they're backed up for weeks.
@james10237724 күн бұрын
I did put metric screws in it after converting the 10-40. M5x0.5 but you can only get those in lengths that are to long which is why I had to make washers.
@Cuauhtemoc324 күн бұрын
I got mine today for 70 bucks. Question does your heat up where the motor is at? Mine is super hot is that normal?
@james10237724 күн бұрын
Yes. Even after running it for a week straight on high, the motor was real hot but never got to the point of burning up or anything. I was worried myself but I checked it constantly for days before I completely trusted it. Was always smelling it too. I'm guessing it's just the bearings heating it up but it's still going. Great fan huh?
@Cuauhtemoc324 күн бұрын
@@james102377 yeah it's worth the money.
@angelagonzalez578623 күн бұрын
I got mine today , and I had it on for a few hours , the motor is hot . Is that normal or should I turn it off ???
@james10237721 күн бұрын
It's normal. I'm still running mine. I've run it for a week straight and yea the motor is hot but it always stays the same hot even after a week.
@marcelmurray6330Ай бұрын
Hey dude I broke the housing how do I remove the connector to replace instead of replacing the line
@james102377Ай бұрын
So it turns out this mount isn't going to work with this Truglo sight because the height is beyond the sights mechanical limit for adjustment so I'm working on a cheap RMR red dot and hope that works out being slightly lower and maybe more mechanical ability. It's a shame because I really like the ignite. The closest I could get it was aiming at a guys head and hitting him in the chest or lower....lol
@mp88885Ай бұрын
No, I believe Donald Trump though, cause he would never lie 😂
@james102377Ай бұрын
The thing is if you can't see the blatant obvious lies out of Bidens mouth which apparently half the country can't, and you can't see the illegal election interference with lawfare and every other thing, you're blnd and only believe what they tell you and you're one sided not opening your eye's and looking at both sides. EVERYTHING Trump said during the debate was the truth yet every media channel said he lied.
@james102377Ай бұрын
You ever wonder why they never show Trump rallys on tv? So people like you won't see the truth.
@robertdelavara176Ай бұрын
What if you’ve tried to jump it threw the starter relay freshly charged battery and new starter,can hear what sounds like the gear stopping when it touches the flywheel.
@james10237728 күн бұрын
Worst case scenario a seized motor but you could try to verify that by turning it ove by the crankshaft pulley. The starter could need shims but I haven't had to worry about shims since I was a teenager. Could also be the wire going to the starter motor itself has corroded off so just the solenoid is doing it's job. I had my Hummer H2, my uncle's silverado, and my side job bosses hummer h2 all had the wire to the starter motor corrode off with 3 month period. Solenoid would kick in but wouldn't crank because the wire going into the motor attached to it basically disintegrated. I learned my lesson putting in a new one. I sprayed the crap out of it with red dielectric spray.
@user-od1cq4ui1kАй бұрын
Part number ?
@james10237722 күн бұрын
Part number for what? Just go on their website. I ordered mine in in two parts. I got the rear spings first then the rest.
@newera305Ай бұрын
Thanks man i was about to change fuel line or connector
@james102377Ай бұрын
You're welcome. I wish I had more secrets to share. Most of the stuff I work on is beyond what an average mechanic can do so I don't even bother recording it. I haven't been able to take shortcuts in a while. Seems like every job I do is taking 8-16 hours for oil or antifreeze leaks. My hummer is my baby though
@james102377Ай бұрын
Someone else commented just cut the end off and put the new one on. For starters it's not like there's extra fuel line to work with and that plastic is so old and hard I wasn't taking any chances. Only had to do it because my fuel pump was rotted and leaking.
@j1mmyv707Ай бұрын
Theres a lot of fake oem car parts on amazon and eBay . Aske how I know.
@TurdCurdle2 күн бұрын
How u know fake or Chinese?
@j1mmyv7072 күн бұрын
@@TurdCurdle if the price is too good to be true bet your ass there fake and will catch your vehicle on fire.
@rosieclark3661Ай бұрын
Man because of you I fixed mine today as soon as the fuse plate came from eBay I was able to get for $14 bucks plus free shipping except the 250 fuse on the plate wasn’t the culprit like most mine was caused by the 300 amp fuse section of the plate may God continue to bless you and yours sir thanks again
@james102377Ай бұрын
I'm glad I could help. I try to record oddball stuff that might help people. Haven't had much lately though. I think the last thing I did was an AC compressor not kicking on and turned out to be a wire broke in the top of the motor from rubbing the bolt head for years but alas not video. Was in a hurry because it was already sold.
Hi from UK i looked on outfitters there only h3 any other options thanks
@james1023772 ай бұрын
When I bought them I had to be notified when they would be in stock again. I think they might wait for so many people looking and then make them in batches.
@james1023772 ай бұрын
That was the ONLY place I could find them. I searched online for weeks.
@james1023772 ай бұрын
Actually I just looked and they have them. Maybe you went to the wrong site? www.outfitterdesign.com/h2-front-differential-bushing-kit.html
@drpepper11322 ай бұрын
I'm having trouble getting the white clip back on
@james1023772 ай бұрын
Make sure it's turned the right way.
@james1023772 ай бұрын
There's 2 nubs that face inward. You have to spread those lightly with a pick or small flathead to get it over the tube. If that's what you're talking about, that goes on the metal tube itself and still snaps into the black part one of two directions.
@glenpound93532 ай бұрын
Time to drill
@james1023772 ай бұрын
Yup, that's exactly what I did. Needs a new rim now but those are cheap enough at the junkyard. Had to pull out chunks and keep smacking the tire with a big hammer. All that mattered to me was not screwing up the stud. It did get somewhat worse though. 2 drill bits broke off in there while drilling.....lol
@james1023772 ай бұрын
I know it's not a wrangler but it's definitely a Jeep thing....lmao
@user-ro5zy3mv6s3 ай бұрын
im lifting one right now i ran into a snag how can i contact you
@james1023773 ай бұрын
Did you get my number before I deleted it?
@wargenius013 ай бұрын
I’m having the same problem, but I don’t think it’s the wire I already checked
@james1023773 ай бұрын
If you're sure it's charged it could be one of the pressure sensors. Easiest way to make sure it's not the clutch is to put power to the wire direct and see if it kicks on. That bypasses the sensors. Sometimes you can do it right at the fuse. If the wire is al powered then the clutch is probably bad.
@CCAutoWorks3 ай бұрын
Just found this out the hard way
@james1023773 ай бұрын
It sucks. God forbid I ever need to do injectors on anything again and have to pay the big bucks for the good ones.....lol
@Tanker.6213 ай бұрын
Your video is bad have of what you are showing you cannot see it too much moving and not showing what you are doing you can't demonstrate with one hand and video with the other hand couldn't see much of what you were doing 😢😢😢😢
@james1023773 ай бұрын
If you have yours in front of you or the couplers from the parts store, you'd be able to see and tell what I was doing. Others understood and have done it.
@josephbenitez28513 ай бұрын
Hey your comments are disabled on you hyper tough fan video and I noticed it was mounted to a wall and that's something I wanna do and I was wondering if you could tell me how you did it, thank you
@james1023773 ай бұрын
If you bought it new in the box it comes with a metal loop and bolt. You screw the loop to the wall which is basically a hook then hang the fan on it and put the safety bolt through keeping the fan from coming out.
@james1023773 ай бұрын
kzbin.infoDhM1m3tRQRs?si=xopVTl-ylpjUNs_3
@james1023773 ай бұрын
Made a quick vid for ya
@james1023773 ай бұрын
I just turned the comments in for it too. Thought they were all on.
@james1023773 ай бұрын
Make sure that lag bolt goes into a stud and not just drywall otherwise it will fall right off the wall making a nice little hole and probably ruin the fan. If you can find the stud, stud finders are fairly cheap which is what I had to use myself.
@user-yz4hp1nn5o4 ай бұрын
What are you working on at the adjuster? I removed everything from the lower control arm... knocked the 2 lower pivot bolts out, got out my kinda bent on one end v drive prop shaft and pried the torsion bar down. Knocked the control arm off the end, stuck the new one on the torsion arm and it went right back together...you got super duper high-power battery impact...all that have us a half indrive Bosch...
@james1023774 ай бұрын
Those torsion keys were 3" leveling keys so there was excessive pressure on the torsion bar and had to be taken off completely to get the pressure off the lower control arm. My torsion crossmember that the keys sit up in, one side the steel is smooshed in from the previous owner and the adjusting bolt doesn't sit right either. When I have the money I'll probably have a machine shop fab me a better thicker new crossmember for the keys. Maybe some quarter inch steel. 3/8 probably be fine too.
@xplicitreaper6665 ай бұрын
Ole gummy bear😂
@jacobcarmona91185 ай бұрын
Who robbed your teeth??
@james1023775 ай бұрын
Democrats in government who kept me poor for 90% of my life.
@kalletow5 ай бұрын
@@james102377Oh noo the evil democrats didnt brush your teeth?
@jacobcarmona91184 ай бұрын
@@james102377the fluoride in the water
@james1023774 ай бұрын
I don't drink water which explains my ability to think freely seeing fluoride calcifies your pineal gland which explains why democrats are brainwashed morons
@kalletow4 ай бұрын
@@james102377 none of this is true, seek mental help.
@bodhi83465 ай бұрын
🍀 "Promosm"
@vaughnferrier71805 ай бұрын
Thank you! There isnt much info out on fixing this leak and mines getting real bad haha
@james1023775 ай бұрын
It's just about any chrysler vehicle lately it seems. This crap started with my jeep compass spending several hours smoke testing and could smell it but never see it. Ended up being the same problem in a Caliber and think I'm up to 4 Grand Cherokees now even though I lack video. My neighbor has same evap code but doesn't want to drop his tank. He said his is so bad he smells gas non-stop.
@user-tm6mk3xr9w5 ай бұрын
Mine is on and wont go of brand new alternator and starter but still just clicks
@james1023775 ай бұрын
Run a somewhat thick jumper wire across those big fuses bypassing them and try. Make sure it's a good connection. You can't even tell these things are burnt out or possibly corroded off. Everything looked normal but that wasn't the case. I think when I tried a multimeter it showed power but it was still bad. I'm assuming it burnt out enough to barely make a connection and when you try to start it heated up and broke the connection like a turn signal relay.
@james1023775 ай бұрын
Make sure your battery is good too because a junk battery will show good voltage but can't handle a load and will have similar problems.
@rosieclark3661Ай бұрын
@@james102377I found that out also and had to go to Walmart to get an extra start H6 for a $179 bucks fired right up with the new fuse plate and runs and shift’s better too these are very sophisticated vehicles and have multiple modules and a weak or regular battery just won’t do
@user-tm6mk3xr9w5 ай бұрын
Was ur battery light on ?
@james1023775 ай бұрын
No. Everything lit up like it was going to start then nothing when the start button was pushed. The starter itself was worn and sloppy on the gear and shaft so I'm assuming it has a jammed up start the drew too much and blew the fuse in the block which you can't replace without replacing the whole thing.
@rosieclark3661Ай бұрын
Fuse plate that sits on top of the battery change it got mine off eBay for $14 bucks free shipping local stealership wanted almost 6 times as much plus tax lol but hey mines fixed now because of this gentleman here 🤔⚠️💯
@markg33055 ай бұрын
How are just the uppers to change?
@james1023775 ай бұрын
Is that you Morin? If you're swapping out the whole control arm it is a pain in the you know what because of the whole shock setup if you're talking about the stock arm. It's getting onto the nuts and or bolts and if they've been in there forever they're probably rusted to the sleeves. I can't remember without watching my own video but pretty sure I had to use torches and cut them out without destroying the thin steel they bolt through. They weren't your average steel bolt and nut and took a lot of heat to melt. My sawzall wouldn't do anything to them except ruin the blade. Once those bolts are out it's not to bad I guess.
@MrKingmanny015 ай бұрын
God bless America
@james1023775 ай бұрын
It's going to cost Massachusetts a billion dollars a year to do what they're doing. They only took in 46 million in taxes last year and over charged and had to return 6 million to the people because of a law put in place yesrs ago. New York is giving out 10 times as much to illegals. The shit will hit the fan before the election in November so they can keep Trump out. That's the only reason they're giving so much. These sanctuary cities are going to burn to the ground when that time comes. Surrounding states just need to be prepared because 50 to 100k illegals per state are massive armies that even our army can't handle.
@williepayne16296 ай бұрын
Im going to try this method out on my buick park avenue 2004 fuel line...they said ill have to go to junk yard...ill rather this method..
@james1023775 ай бұрын
Especially if it's too much trouble to get the whole line out and you can manage it while it's still in the vehicle. I had to drop my tank for the fuel pump anyways and the metal piece broke off inside the line so I had to dig it out.
@williepayne16295 ай бұрын
@james102377 I got them pieces to get the O rings my good brother...the yellow o rings did nt fit...was to small..
@james1023775 ай бұрын
The orings were to small? I almost think they sold 2 different sizes. If that's the case then it's probably the other size. I almost think I had to measure the outlet to make sure I got the right size.
@james1023775 ай бұрын
I just looked on ebay and Amazon and I do see fuel line quick connects from 1/4" to 5/8" so you'd definitely want to measure the outlet
@williepayne16295 ай бұрын
@james102377 man u are swell dude big bro..thxz for info
@dudesons4206 ай бұрын
Thank you sir!
@james1023776 ай бұрын
You are welcome! If you aren't already subscribed I'd appreciate it.
@guntherwheeler_6 ай бұрын
that’s a new england icicle
@james1023776 ай бұрын
Lol
@trevorwhalen86596 ай бұрын
Or don't buy a Ford
@coupons4206 ай бұрын
That’s wild, makes sense why my bros is rotted there
@audioguru656 ай бұрын
That truck shouldn’t be on the road…
@guntherwheeler_6 ай бұрын
agreed
@james1023776 ай бұрын
I rebuilt that frame right there and about 3 more feet. It's more solid now than the original.
@ianj.lacoste72656 ай бұрын
Install a galvanic antitrust system like the ones the use on boats.
@james1023776 ай бұрын
I don't know if Ford purposely designed it like this or what. Most of the F-150's I've been working on are all rotting out in the same spot and like the previous video I made on this truck saying how the water runs down the frame from this point forward and ends up running off the sides of the frame into any openings and down into the frame keeping it constantly wet or damp along with any salt or dirt that managed to build up inside the frame. It's a recipe for rot.
@philfish66196 ай бұрын
Is.ot lifetime warranty of normal use. Or off-road aswell.
@james1023776 ай бұрын
Yea. I'm guessing that's part of the reason for the price of them. They're very specific of the requirements you must meet like original purchaser and vehicle, has to come from an authorized dealer not some joe blow on ebay etc. That's my only concern with the warranty. I don't even remember where I got mine already. I think I got it direct for that reason....lol
@james1023776 ай бұрын
I just realized I misunderstood your comment. Yes. If you read their warranty it says something like jump it race it beat it beat the shit out of it....lol so off road yes.
@heatherandbillyoneal47036 ай бұрын
almost 90k miles WOW- I've got a 2003 with 230k, I'm the only second owner
@james1023776 ай бұрын
I hope to be my hummers last owner. I have way to much time and money into it. I think it's at about 98k now because my Compass broke down for a while so I went back to this as my daily. Luckily gas prices dropped right after and the day after I fixed my Compass they went back up....lol 8 mpg at 74 miles a day to work and back was running me $150 a week.
@james1023776 ай бұрын
Only reason I know about the ads is because I was watching my own video looking for something and it stopped and an ad started playing. I was like wtf!
@Aaronmilo1226 ай бұрын
Hey
@james1023776 ай бұрын
What's up?
@james1023776 ай бұрын
I just added another short. I took today off and worked on my Hummer for 13 hours straight.
@user-bw2ms2hj4t6 ай бұрын
Аппарат бомба
@james1023776 ай бұрын
Thank you. I've put a lot of time into this beast. Blood sweat and tears
@emsea72796 ай бұрын
What time do we have problems with high impedance and low impedance? Some injectors need a little computer box try cranking your fuel pressure up
@james1023776 ай бұрын
They were stock aftermarket no names.
@HUMMER_H26 ай бұрын
この商品はどこで購入できますか?
@james1023776 ай бұрын
JL Audio? Sonicelectronix.com or anyone that sells jl audio. The bracket or mount rather is factory and should already be in your door with the factory speakers if it's original still.
@nikolap.99636 ай бұрын
Buddy..... 6bolts & bed is off so now you can look like a good WELDER ... just saying.
@skyw42786 ай бұрын
water is wet.
@james1023776 ай бұрын
😂😂😂😂
@captainotto7 ай бұрын
I have a '17 ranger double cab here in the UK. It had almost as much scale throughout the frame seams and more importantly inside the box sections and crossmembers. It had the factory sealant on it and had never been treated since. I gave it the full inside out inspection including borescope through the frame and in the fenders and rockers and whatnot. One thing I would point out is that there are baffles throughout the frame. The baffles accumulate mud, lifted paint, rocks, sand, etc and this abrades the paint/surface coating inside, sometimes even plugging drainage holes. Fortunately there is a cheap and relatively simple solution to the issue. There are access holes throughout the frame that are large enough to stick one of the cheap drain jetting nozzles and hoses inside the box sections and some of the crossmembers. That can then be used to jet away all trapped mud and debris, remove lifted paint and some scale, and provide a clean and more stable surface for a wax or oil coating. Any electric pressure washer can power it but you need one of the cheap home drain jetting kits with a hose, not one of the expensive and larger kits for professionals.
@james1023777 ай бұрын
I've seen ads on Instagram for a magnetic jet you connect a garden hose to and insert it into a frame hole and it sprays in multiple directions. You just leave it in there onto the frame for a while and let it spray. Think it was around $100. You're only relying on whatever your water pressure is though.
@captainotto7 ай бұрын
@@james102377 I haven't come across those but it sounds like they are on the right track. I don't think it will remove much of the bad stuff though. Might be good for a quick flush but you really want to give it a good blasting because breaking up scale isn't really possible without high pressure. The other point that comes to mind is that drain jetting nozzles use some of the power to propel themselves (they have rear facing jets). This means you can start on one end of the frame, turn the thing on, and just fish it through the entire member in a matter of seconds. Then start on the other end and do the same thing. Now you've thoroughly flushed out the frame including sediment on both sides of the baffles, top, bottom, etc. Oh and if you ever try this, don't bother with the static nozzles. Just go straight to the rotating jetter. It's the only one that's really applicable to this job in my experience.
@gilbertgreens7 ай бұрын
I can hear it
@james1023777 ай бұрын
Am I right that it shouldn't sound like that?
@james1023777 ай бұрын
I don't usually make it a habit to actually listen to running fuel pumps up close so I don't know