I downloaded the animated FAN and TANK model for Proteus, but I'm being asked for a password to extract it. Could I please have it?
@electronicstree3 күн бұрын
The password for the library zip file is: electronicstree.com
@moftahaltajoury631412 күн бұрын
Is it possible to modify the code so that it transmits texts via the serial monitor using this same circuit?
@electronicstree12 күн бұрын
Yes 👍
@moftahaltajoury63146 күн бұрын
Can you give me or help me with a code that performs this process?
@pleenam24 күн бұрын
very helpfull
@osmundmorrison478627 күн бұрын
Please help me. I downloaded the library but when i want to open it i am being told "The archive is either in unknown format or damaged"
@electronicstree25 күн бұрын
Hi, it looks like the error is caused by the antivirus. Please disable it and download the zip file again.
@SaltyTilАй бұрын
Got the encoder model from your site, came here to say thanks for it. Can't believe Proteus 8.13 doesn't have a proper rotary encoder model!
@guilhermeguerra7242Ай бұрын
Is it possible to have comunication of both boards with one cable?? 😊
@electronicstreeАй бұрын
Yes, you can, but it would be simplex communication.
@guilhermeguerra7242Ай бұрын
@@electronicstree tks, hey friend were could i buy this HFBR-1414 / HFBR-2421
@ESANTOSHNPАй бұрын
how do i get the mac address of the arduino which is in proteus software
@electronicstreeАй бұрын
You can use any random MAC address.
@alexforgosh2397Ай бұрын
Hey! Fantastic video, I was wondering how/if it would be possible to modify this design to work at 6.2 MBaud?
@electronicstreeАй бұрын
If you're working with microcontrollers, this transmitter and receiver setup should work fine. To answer your question, you just need to adjust the values of the passive components for the transmitter. For the receiver, if you're looking at speeds above 5Mbaud, you'll want to swap out the HFBR-2412 with another model like the 2416. Check out Broadcom's Applications Support Guide for all the configuration details you need.
@alexforgosh2397Ай бұрын
@@electronicstree Thank you! I will look into this, do you have sample calculations for how you chose your own passive component values?
@yenimariregaladojuarez5310Ай бұрын
Hello, good afternoon, I have a problem, it doesn't allow me to unzip the libraries for Proteus, why does it ask me for a password, I was wondering if maybe you could give me the password for these libraries? Please?
@electronicstreeАй бұрын
The password for the library zip file is: electronicstree.com
@yenimariregaladojuarez5310Ай бұрын
@@electronicstree Thank you very much friend, I am very grateful to you.
@louisakrono439Ай бұрын
First of all, thank you for this assistance. Helped us out here. But when it comes to the simulation in Proteus 8, there are some errors that spring out: "Cannot find model ENC28J60.MDF" and "Simulation FAILED due to netlist linker error(s). And "Pin CS, SI, SO, SCK, RESET, INT, CLKOUT are not modeled." So I was wondering if you could help us or even encountered a problem like this before. Link to the screenshots of the layouts and their results are here in case you want to have a look: drive.google.com/drive/folders/1eHlfaXo0AjIQ-qjBx76-C4xUypeI3i0M?usp=sharing Thank you.
@electronicstreeАй бұрын
The reason you are facing this issue is that Proteus can't find the model file for the ENC28J0 module. The library model comes with a folder named "MODEL" containing the MDF file. Have you placed this file in the Proteus Model folder?
wow blender and arduino with this serial method is so good
@cyncolakanisibiya5304Ай бұрын
Hi, Can this module be linked with thingsspeak on MATLAB ?
@electronicstreeАй бұрын
No
@rickhuang44782 ай бұрын
it is great~~~~~ wish it will add more device libraries like nodemcu,esp32,raspberry pi, .... it will be perfect. thanks for your sharing...
@electronicstree2 ай бұрын
Proteus does not currently support the simulation of web-based models. However, you can simulate the ESP8266, which is already provided by default in Proteus, using the IoT framework. Alternatively, you can use the ENC28J60 Module in Proteus for creating web server-based projects.
@newmail35492 ай бұрын
Would you pls add; Raspberry pi, esp32, esp8266, mpu6050, A4988, nodemcu, turbidity, ph meter, NRF24L01, fingerprint, orp water quality, dissolved oxygen, adxl335, TDS water quality, water flow, force, RTC, keypad, gsm, gps libraries. Thank you.
@electronicstree2 ай бұрын
Currently, I'm working on some of these models, so they will be available after complete development. For IoT projects, you can utilize the default Proteus ESP8266 model, or alternatively, you can employ ENC28J60 Modules for web server projects in Proteus.
@guilhermeguerra72422 ай бұрын
Hey vood video, could you help me with the code??
@electronicstree2 ай бұрын
Sure thing! What part of the code do you need help with?
@guilhermeguerra7242Ай бұрын
@@electronicstree its giving me wierd chars ␀␀␀␀��␄␀␒ ␀��␄␀␒ UU␀␀␀␀�␄␀␇␇␒ ␀␀␀␀��␁␇␀�
@HadjerElHamlili2 ай бұрын
si i have question : how to connect SFP modul with arduino?
@HadjerElHamlili2 ай бұрын
sir , i have question : how to connect SFP modul with arduino?
@electronicstree2 ай бұрын
Which specific SFP module are you looking to connect to the Arduino?
@HadjerElHamlili2 ай бұрын
@@electronicstree i don't know yet, i'm going to use my single -mode fiber optic system , arduino uno, two SFP modules on both sides of the fiber optic
@jomarbonje34962 ай бұрын
cant open it says, incorrect password
@electronicstree2 ай бұрын
The password for the library zip file is: electronicstree.com
@jomarbonje34962 ай бұрын
@@electronicstree thank you so much!
@kcha9862 ай бұрын
buen video bro
@itz_k1t32 ай бұрын
Hello, i have just tried your sound module but when i turn on some audio file, nothing happened. Can you give me some comment, thank you.
@electronicstree2 ай бұрын
Hi, have you tried using the audio input from your PC, such as your microphone?
@segyjoe6542 ай бұрын
I CANT SIMULATE HELP ME
@electronicstree2 ай бұрын
Could you share more details about the issue you're encountering with simulation? Knowing more about the specific problem can help us find a solution.
@manfredbogner97993 ай бұрын
Sehr gut
@roxasparks3 ай бұрын
Subbed
@nathanneisan56973 ай бұрын
can i have the bulb and power source ac library sir ?
@@electronicstree sir I can't download any library from ur site even I changed phone. Please send all those libraries through a drive link
@thomasipt3 ай бұрын
what is the capacity of the Ethernet::Buffer ? I tried for HTML 10546 characters web browser just loading on the hardware I use W5100, and it runs smoothly because Proteus doesn't have a library, I simulated it using enc28j60
@electronicstree3 ай бұрын
please read the Ethercard Library Requirements "Depending on the size of the buffer for packets, this library uses about 1k of Arduino RAM. Large strings and other global variables can easily push the limits of smaller microcontrollers"
@tjarchman55743 ай бұрын
😻 "PromoSM"
@Wolf_of_Tarkov3 ай бұрын
Could you provide the schematic for the Receiver circuit? I went on all the Arduino links you provided but I couldn't figure out the connections to the LCD. Apologies if I missed it! I really want to try this circuit out. Thank you!
@electronicstree3 ай бұрын
I have provided the receiver schematic in parts 4 and 5. All you need to do is connect the TTL data out pin to the Arduino RX pin. As for the usage of the LCD, I assume Arduino users already know how to use it because it's a basic thing.
@akbarscriper3 ай бұрын
bro, can the 2.4ghz signal be converted to this module... so that I can transmit the 2.4 signal to many routers via fiber... to act like OLT...
@electronicstree3 ай бұрын
no
@akbarscriper3 ай бұрын
@@electronicstree oh okay... for the signal you transmit using this method, it's a digital or analog signal... bro
@electronicstree3 ай бұрын
You can transmit both analog and digital signals using this method. In the demonstration, I transmitted analog signals.
@akbarscriper3 ай бұрын
@@electronicstree thanks bro for the explanation...I will try transmitting 2.4ghz wifi signal (analog signal) over fiber (ROF)... router <> laser transceiver <> fiberoptic <> laser transceiver <>router
@emir4707Ай бұрын
@@akbarscriperMaybe with esp32 you can transmit and recieve tcp packages
@mehdiaziz93043 ай бұрын
How to control the direction of two motors from relay 4 module. Two relays for one motor
@kamal_kumar19k3 ай бұрын
Not compiled...... error -> " undefined reference to Flasher::pinSetup()"
It's perfect. Thank you very much, I managed to make the connection. But I wanted to ask if it is possible to connect with my phone? So give instructions to the ardunio to start From my phone
@electronicstree3 ай бұрын
Currently, this is not possible because the ENC28J60 is an Ethernet module designed to work with a network card. However, if I discover a way to achieve this functionality, I will definitely inform you.
@clarissarodriguezdionicio76264 ай бұрын
Súper Útil, muchas gracias!
@yametekudasaisensei5394 ай бұрын
Could u make a video explaining a simple DIY protocol for a simple project like a coupled LED and sensor transmiting info between 2 arduinos, i mean, data structure for serial communication, error check etc
@electronicstree4 ай бұрын
Creating a DIY protocol for a project like this is quite achievable! We can design a straightforward communication protocol utilizing serial communication, implementing error checking mechanisms to ensure data integrity between the two Arduinos. I'll be sure to incorporate this into the upcoming videos.
@yametekudasaisensei5394 ай бұрын
Ill wait for ittt thanksss!!@@electronicstree
@mariamendonca59924 ай бұрын
Does it work with proteus 7? Cause mine it does not work😢
@electronicstree4 ай бұрын
What's the problem you're having? Can you explain how it's not working?
@mariamendonca59924 ай бұрын
@@electronicstree when i pasted the file(moduls to library) i got notification "an unexpected error is keeping you from copying the file. If you continue to receive this error, you can use the error code to reach for help with this problem." Error 0×8096002A: No error description available.
@electronicstree4 ай бұрын
Have you extracted the zip file?
@ilanrodriguez55665 ай бұрын
GRACIAS AMIGO ME AYUDASTE MUCHOO
@user-pp3yq4rj9v6 ай бұрын
what's the password required to unzip the relay file
@electronicstree6 ай бұрын
The password for the file is: electronicstree.com
@syazilikhai5246 ай бұрын
can you share the library for the bulb and the battery?
it will be available soon. Thank you for your interest
@adiibah93336 ай бұрын
did you have valve coil library ? @@electronicstree
@electronicstree6 ай бұрын
Yeah, sure. As soon as I upload it, I will give you the link
@darshanpanchal30466 ай бұрын
can i use it as for SPI communication?
@electronicstree6 ай бұрын
If you want to use the SPI interface, you will have to use the number of optical transmitters/receivers and optical fiber cables accordingly to the SPI lines. This is because it requires more signal lines (wires) than other communication methods. Essentially, you have to convert every electrical signal line to a light signal and then convert these light signals back to electrical signals. Therefore, this approach may not be suitable.
@marcelogomes33217 ай бұрын
Congratulations!!
@Mistrzu2207 ай бұрын
The only problem I see here is the price and availability of TX diode HFBR-1414Z and RX photodiode HFBR-2412Z. Currently, prices for these components are around $50. However, the video is very interesting!
@electronicstree6 ай бұрын
The prices I found range from 7 to 10 dollars for each module, while some sites offer them at 20 to 28 dollars. If you find any, you can use any TTL-compatible modules according to their data sheets.
@Mistrzu2206 ай бұрын
@@electronicstree I decided to use a different technology for my project - toslink. RX and TX (DLT1160A) cost me ~$2. Thank you for the inspiration.
@The30Zone7 ай бұрын
Hey everybody. does this addon also work on macOS? im having dificulties insalling the zip. It just wont show the blendixserial in the addon menu.
@electronicstree7 ай бұрын
I haven't tested this addon on macOS, but I'm here to help troubleshoot the installation issue. Could you share more details about the error you're encountering during the blendixserial zip file installation?
@user-tq9bx9nf4q7 ай бұрын
Very good video, it is rare that people are describing electronics details like that in arduino videos. I appreciate that :)
@electronicstree7 ай бұрын
Thank you so much! I'm glad you found the video helpful.
@qzorn44407 ай бұрын
Most interesting information. 🥳 Do you have a video on a real world XYZ Gyro MPU6050 moving a 3D Blender object? Arduino Nano or Raspberry Pi Pico are two boards I am using. 😎 Thank you.
@electronicstree7 ай бұрын
Not yet, but I will make it soon. I've created a video using an ultrasonic sensor SR04 and an LM35 temperature sensor where the data from both sensors is sent to Blender for visualization through animation.