I have a question can i do that just conecting to the batery +&-power the reciver? 3 times × with no drone just plug to the battery
@windmillboxfpvАй бұрын
Yes, no drone needed but receiver needs 5v so voltage stepper is needed to achieve the voltage. When you plug it to the battery straight alway you gonna burn the receiver.
@BigAirr.Ай бұрын
awesome!
@windmillboxfpvАй бұрын
Thanks!
@ZenoModiff2 ай бұрын
how is the rush fpv 60amps extreme esc ? i want to buy one
@windmillboxfpv2 ай бұрын
In my opinion is the best I have used so far (and went through a bunch of). You can match it with kiss fc with no issues and fly 2400 dshot if needed.
@MookMan3 ай бұрын
Niiice
@windmillboxfpv3 ай бұрын
Thx mate
@OGShortyFPV3 ай бұрын
So dope brother!! Sharing this in the community spotlight tonight in the OGShortyFPV KZbin channel!!
@windmillboxfpv3 ай бұрын
Thank you 😊
@koycdjartage25713 ай бұрын
Are you flying on auto or nd filters ?
@windmillboxfpv3 ай бұрын
always ND filters
@windmillboxfpv3 ай бұрын
but on this video I was demonstrating hero 8 with Hypersmooth 2.0 so was no ND fitted
@P0opingCatfish3 ай бұрын
Do you need to use smart audio to set up the vtx or can you just use the buttons on the vtx
@windmillboxfpv3 ай бұрын
Hi, yes you can use buttons if you not able to set up smart audio. It’s just easier using osd.
@svensonable3 ай бұрын
nice vid :) i just bought the ag01 mini in blue :D
@windmillboxfpv3 ай бұрын
Awesome 👏
@Kwad.Kev23 ай бұрын
I use these motors for freestyle they’re personally my favorite and underrated they feel a lot faster than like a 2207/2306 and are pretty durable but 2107.5 is a different typa feeling IMO
@windmillboxfpv3 ай бұрын
good for you bud, great motors, I was very happy with them I remember
@benyosep56404 ай бұрын
I’m calling the FAA! 😂
@windmillboxfpv4 ай бұрын
😂
@damianwyczakowski24914 ай бұрын
Do you use stock pid? Or some preset? 2107.5 vs 2207?
@windmillboxfpv4 ай бұрын
Hi. All quads I tune myself, 2107.5 as I remember but it was long time ago 😊
@windmillboxfpv4 ай бұрын
Never used 2207 geprc but normally I use 2207 motors daily and 2207.5.
@charlaschoco63334 ай бұрын
U r fpv drone 5 inch or 4 inch?
@windmillboxfpv4 ай бұрын
Only 5 inch 🤙
@nosferas-hx4jk4 ай бұрын
what is your gimballs?
@windmillboxfpv4 ай бұрын
They are AG01 mini from Radiomaster.
@nosferas-hx4jk4 ай бұрын
@@windmillboxfpv thanks !
@saurabh12035 ай бұрын
To which speedybee connection point did you solder each wire of vtx ? and which Ground wire did you tape ? There are 2 of them.
@windmillboxfpv5 ай бұрын
Hi, well, that’s not a speedybee it’s cl racing f4. Taped the ground and power for the camera as is powered from fc not vtx.
@user-sz2ds1up6u6 ай бұрын
Hi
@windmillboxfpv6 ай бұрын
🤙
@rosamariavazquez92196 ай бұрын
I think that that's a game 🤔
@windmillboxfpv6 ай бұрын
Nope, it’s real FPV
@valdenizalopes8506 ай бұрын
Hi
@windmillboxfpv6 ай бұрын
🤙
@appiemenschaert6 ай бұрын
Nice bro!
@windmillboxfpv6 ай бұрын
Thanks
@Tomioka____Giyu6 ай бұрын
Comments silent eh💀
@windmillboxfpv6 ай бұрын
😊
@Drodeel7 ай бұрын
Nice moves ❤❤❤
@windmillboxfpv7 ай бұрын
Thanks mate
@Sleeperknot7 ай бұрын
Thanks. One qn : Did you have to update the firmware in your TC12 Mk2 in order to be able to do this? I have bought this unit and there is a sticker on it that is warning me not to use the original firmware and I must update the firmware. I am also confused about firmware update videos talking about cooking up a bin file using the ERLS configurator that matches the binding passphrase of your receiver. Did you have to do that?
@windmillboxfpv7 ай бұрын
Hey, no, I got one of the first radios with receivers and all of them on the same firmware actually. But had to change firmware on my old receivers to get them working... No issues at all actually. I think the best you could do is to watch Bardwell's videos about ELRS firmware how to do it.
@Sleeperknot7 ай бұрын
@@windmillboxfpv Thank you!
@mangmukidintea7 ай бұрын
Wow 😮👍
@windmillboxfpv7 ай бұрын
🤙
@remyKhuong7 ай бұрын
😂 your heartbeat man😂
@windmillboxfpv7 ай бұрын
Yep 😂
@santhoshmamidisetti9 ай бұрын
Hello nice tutorial, but I must say I am in a deep trouble , hoping you guys could help me ,I am very new to this field , this is my first build with Pixhawk 2.4.8 and Mission planner. I am planning to buy TX12 Mark II Radio Controller (ELRS version) , please help me choose a receiver, I am unable to figure out what is needed for my quadcopter and also what is the difference between RP1 ,RP2,RP3 ELRS Nano Receivers and ER4 ER6 ER8 2.4GHz ELRS PWM receivers? please help me and also do I only have to buy the receiver or any other extra hardware with it ?
@windmillboxfpv9 ай бұрын
Thanks man. Unfortunately cannot help you as I know nothing about Pixhawk fc. Pwm receivers are used with planes etc where you need separate channels for each flaps etc. Rp1-rp3 are for drone fc where you only need rx and tx port.
@santhoshmamidisetti9 ай бұрын
@@windmillboxfpv thanks for your reply, appreciate it ☺️✌️
@treintrein899 ай бұрын
First, incredible skill btw
@windmillboxfpv9 ай бұрын
Thank you 😊
@Chillin-fpv10 ай бұрын
Lol those moments where your heart skips a few beets and now you feel like you just ran a mile 😂
@windmillboxfpv10 ай бұрын
Yeah kinda but I lost video behind. Just heard huge bang ❗️
@Chillin-fpv10 ай бұрын
What an awesome place to fly!
@windmillboxfpv10 ай бұрын
One on my favourites
@Chillin-fpv10 ай бұрын
Trees are dicks 😂
@Chillin-fpv10 ай бұрын
Been there done that 😂. Expect the tree i was in was covered in black berry bushes and i was all cut up and pulling thorns out of my arms and face after i had to climb it to get it back.
@windmillboxfpv10 ай бұрын
😂😂😂
@Chillin-fpv10 ай бұрын
Wow that was inchs away. Good save!
@windmillboxfpv10 ай бұрын
Thanks 😊
@Chillin-fpv10 ай бұрын
Do you not have osd?
@windmillboxfpv10 ай бұрын
I do have. Sometimes not paying attention what’s there 😂
@Chillin-fpv10 ай бұрын
Lol thats awesome 😂
@windmillboxfpv10 ай бұрын
Thanks mate
@Chillin-fpv10 ай бұрын
Damn... good shit!
@windmillboxfpv10 ай бұрын
Thanks
@SFSB-Infinit84010 ай бұрын
Car in ohio
@windmillboxfpv10 ай бұрын
🤙
@eprohoda10 ай бұрын
Good night,nice ,have a great day~
@windmillboxfpv10 ай бұрын
Thanks
@cmosdaboss10 ай бұрын
Done made me pull out the quads. Geez thanks. I just wanted to rest this afternoon. 😂 needed the excitement anyways. Nice vid bro
@windmillboxfpv10 ай бұрын
Cheers 👋
@MookMan10 ай бұрын
niiice
@windmillboxfpv10 ай бұрын
Thanks man
@RealistikFPV10 ай бұрын
How did you do that then?? hahaha
@windmillboxfpv10 ай бұрын
yeah wasn't easy ;) made special stuff to make it happen ;)
@MarkoFPV10 ай бұрын
Hello friend, what are the best propellers for these 2107.5 1960KV 6S engines. For smooth fresstyle
@windmillboxfpv10 ай бұрын
Hi, I’m not using those motors anymore. You can’t go wrong with HQ props. I use for freestyle P3. If you need more pitch than P3.3 or P3.5.
@lairdyfpv899411 ай бұрын
We’ve all been there 😅 having to much fun 😂
@windmillboxfpv11 ай бұрын
Lol 😆
@northeastdroneproductions11 ай бұрын
Nice, well done
@windmillboxfpv11 ай бұрын
Thanks
@BensMiniToons11 ай бұрын
I changed the setting so it exposes for the bottom of the view. so you can see the ground and not go dark all the time from the clouds.
@windmillboxfpv11 ай бұрын
What exactly have you changed?
@BensMiniToons11 ай бұрын
@@windmillboxfpv GoPro Spot Meter. I spot meter in the near the bottom so the ground stays more consistently bright.
@BensMiniToons11 ай бұрын
@@windmillboxfpv Also your Video is amazing. No need to change anything! Awesome skills!! I haven't sleep and commented the OP on the wrong video. but hey test for yourself if the Spot metering bottom of the screen helps your footage. Its not always the best option. Just press and hold on the Go pros screen to bring up spot metering. and drag it to the bottom.
@windmillboxfpv11 ай бұрын
@@BensMiniToons yeah thanks a lot, it’s my old video it looks like still ok 😉 will try your option. Cheers
@ZeynepYucel-vb2di11 ай бұрын
Hello, I have a t motor f7 card, I'm thinking of buying elrs, but it says tbs nano rx connection on my card, do you think it will work if I buy the one in the video?
@windmillboxfpv11 ай бұрын
Hi mate, yeah you can use elrs receiver with no issues, the wiring is exactly same as tbs receiver. Betaflight using crsf (crossfire protocol) to work with elrs receiver.
@MacklinFpv11 ай бұрын
Is it me or is there a lot of prop wash
@windmillboxfpv11 ай бұрын
Yeah there was a bit, some stuff was tested and also one prop got damage a bit, well spotted 🤙
@MookMan Жыл бұрын
nice spot dude, I saw your dive as well - v. nice - where's this?
@windmillboxfpv Жыл бұрын
Thanks mate, the dive was less than an inch 😂, it’s Skreen, Co. Meath. And the tower were the dive was very close as well.