Training for when the game warden asks to see your fish🤣
@evolvingskills59032 күн бұрын
That indoor/blacklight stage is super interesting! Where is this?
@TheRagingBull2 күн бұрын
Was a badass stage. Best one of the match probably. This was in Hot Springs AR at mountain valley melee.
@jamespeterson834520 күн бұрын
You're a regular rootin', tootin', shootin' son of a gun.
@keithrange445723 күн бұрын
Great job!
@TheRagingBull22 күн бұрын
Thanks Keith - was a fun shoot!
@jacobkaler35726 күн бұрын
Which Optics did you put on each?
@TheRagingBull26 күн бұрын
@@jacobkaler357 on the 5” I put the 507COMP and on the 4.25 I put a 509T
@ChrisSullins26 күн бұрын
509t?
@TheRagingBull26 күн бұрын
@@ChrisSullins Yes sir, on the 4.25 is a 509T. And on the 5” is a 507COMP.
@lmSteveoАй бұрын
What ammo are you running? Heard it has to be a true FMJ, can’t be plated. ie blazer cci is a no go.
@TheRagingBullАй бұрын
On my new gen2 I’ve been running 92gr high fps reloads or Feyochhi or Magtech or Igman. Also some Winchester NATO and some federated ordinance. No issues so far.
@lmSteveoАй бұрын
What ammo are you running? Heard it has to be a true FMJ, can’t be plated. ie blazer cci is a no go.
@brianusa394Ай бұрын
I wish that Bul USA MADE IT INTO THE 21ST century technology wise . They don’t have the ability to take back orders you have to play musical chairs with their web site to see when they periodically release a few for sale. I think the make a nice pistol I would love to buy. I’ve been watching their site for 2 months with no luck
@TheRagingBullАй бұрын
@@brianusa394 have you signed up for the email notifications ? That’s how I got mine. Had email notifications on and email alerts.
@mindfuctmatrixАй бұрын
The EDC 4.25 and TAC 4.25 are in stock right now. EDC came in stock a few days ago, and the TAC alert came about 4 hours ago.
@TheRagingBullАй бұрын
@@mindfuctmatrix very nice ! Did you pick one up
@mindfuctmatrixАй бұрын
@@TheRagingBull Yes! Originally the EDC came in stock and I pondered for a few days about it. Then, Aug 1st the TAC 4.25 non ported model came available and I ordered that as it was my preferred choice as something I can have fun with and train at classes, and also carry in the fall and winter.
@TheRagingBullАй бұрын
@@mindfuctmatrix nice ! Congratulations. They’ve been great pistols for me so far. Lots of fun
@AngelRivera-wp9bgАй бұрын
loud
@TheRagingBullАй бұрын
@@AngelRivera-wp9bg not the quietest gun out there, no hah
@Jus10worsT2 ай бұрын
What filming set up you using bud?
@TheRagingBull2 ай бұрын
@@Jus10worsT it’s a Insta360 Go2 bro. They have the Go3 out now.
@Jus10worsT2 ай бұрын
@@TheRagingBull your filming always looks so good. Is it a pain to upload to the computer or can upload to your phone?
@TheRagingBull2 ай бұрын
@@Jus10worsT thanks man ! Honestly I’m about as low budget as it gets. I film with my hatclip setup with the Go2 - pull it off the insta360 app onto my iPhone and will splice things together with iMovie if I need to before uploading to KZbin or Reddit or whatever all on my phone.
@GMFilmmaker2 ай бұрын
The bag smell like death😂. Is true the oil on the pistol has a strong bad smell that spreads when you open it. I buy the Tac Pro 5” and have to clean it and the bag, is really bad 🤢.
@TheRagingBull2 ай бұрын
@@GMFilmmaker definitely not good !! I tossed some scent laundry beads in mine and put them in the garage for a few weeks hah
@wisesage32892 ай бұрын
How loud are the ports? Thinking getting one for IDPA, which is indoors. Nice short and concise review. Share your feedback after the match.
@TheRagingBull2 ай бұрын
@@wisesage3289 The gun is pretty loud - but mostly for your poor friends shooting with you and the SO. You don’t much notice it while shooting yourself. I always double up my ear pro - especially indoors. Laser Lite foam plugs and HL Bolts with gel cups.
@02xteraАй бұрын
So it’s a question of having the V8 ports or not. No significant benefits to have the ported barrel, other than having it being slightly flatter shooting and louder to be sure, with slight concussive attributes and constant cleaning of the exterior barrel which can be difficult. I've already sold the 5" Pro for the non-ported 5" version, it just wasn't for me.
@darriusjackson98822 ай бұрын
Nice! How long do they take to ship? I want to order one but not sure about how long the wait will be.
@TheRagingBull2 ай бұрын
@@darriusjackson9882 my order shipped out in 2 days and got to me in under a week. The bigger problem is getting them in stock ! Make sure to sign up for email notifications.
@darriusjackson98822 ай бұрын
@@TheRagingBull thanks!! I’ll go sign up now!
@TheRagingBull2 ай бұрын
@@darriusjackson9882 good idea if you want one ! Good luck !
@GrahamB2 ай бұрын
Took delivery of my 4.25 about 3 weeks ago after I was notified they were in stock..shipped out the next day and was in my hand at FFL 2 days later. But I live in south florida and they ship from Miami so that helps obviously
@TheRagingBull2 ай бұрын
@@GrahamB nice ! How’s it been working for you
@Banhthibu002 ай бұрын
What do you think non ported version?
@TheRagingBull2 ай бұрын
I only own and have shot the ported versions but the fit and finish is really top notch so I assume it would be just as fantastic. I get some people probably don’t want the ports, or if I wanted to shoot Limited Optics I would get the standard Tac non ported version.
@Banhthibu002 ай бұрын
@@TheRagingBull i got it thank sir
@02xtera19 күн бұрын
No significant benefits to have the ported barrel, other than having it being slightly flatter shooting and louder to be sure, with slight concussive attributes and constant cleaning of the exterior barrel which can be difficult. I've already sold the 5" Pro for the non-ported 5" version, it just wasn't for me. I have no regrets letting go of the V8 model. I now ordered the 4.25" TAC - wanted to see if I prefer a shorter slide.
@Horrible_Shooters2 ай бұрын
Im looking to hopefully get the EDC Pro when it releases. great video!
@TheRagingBull2 ай бұрын
Would be a great choice. Are you going to use it for carry?
@Buletspunge5552 ай бұрын
Remember IDPA let's you reload with the 11th round in the pipe nowadays. You missed a couple opportunities to avoid a standing reload ;) nice shooting!
@TheRagingBull2 ай бұрын
Always room for improvement ! However if there are surprise target or you’re in the open you have to go to slide lock before you can reload regardless of engagement.
@thedude542 ай бұрын
How do you like the new mags?
@TheRagingBull2 ай бұрын
They’ve functioned perfectly through range and the one IDPA match so far. I rotated all 8 - and while not a ton of rounds through each they’ve had no issues. Getting the 20th round in them is a little tight. They also stick out ever so slightly more than the gen1 19’s. I wonder if they might not fit in the box given how tight the previous 19s were.
@thedude542 ай бұрын
@@TheRagingBull both mags that came with the 2023 edc started rattling after their first cycle. Sounds like 2024 has improvements across the board. The loctite has set, ready to see if these live up to the hype.
@TheRagingBull2 ай бұрын
@@thedude54 my mags rattle a little - but everything has functioned flawlessly. how did the shooting go !
@thedude542 ай бұрын
@@TheRagingBull so nice. I thought the edc 4.25 was flat, the 5 pro is a different level. I knew it would be a little better but not this much. The 4.25 is amazing, don’t get me wrong, but the pro is basically a race gun.
@scottsears51562 ай бұрын
I have the 5 inch and I put it right there with my staccato XC . The Bul is actually a bit softer and has a better trigger.
@TheRagingBull2 ай бұрын
It’s amazing for the price point. Amazing for any price point really.
@thedude542 ай бұрын
You in Texas? Where do you shoot IDPA matches?
@TheRagingBull2 ай бұрын
Yeah, well that’s just, like your opinion man. (I hope you get the reference Dude). DFW. Frisco Gun Club, Mister Guns, M160.
@thedude542 ай бұрын
@@TheRagingBull the dude abides. I’m in Austin, only one place around here and it’s on the other side of town.
@fionicki2 ай бұрын
Mine just shipped today 4.25 ported, I can’t wait, it sucks that it isn’t fast shipping it’ll be here Monday tho, i am excited
@stevenchacko10502 ай бұрын
same bro. ill get mine friday
@TheRagingBull2 ай бұрын
Nice man ! Let me know how you like it !
@erock372 ай бұрын
Just picked up my 4.25 TAC Pro today from my local FFL! Can’t wait to get it on the range. Thanks for the vid.
@TheRagingBull2 ай бұрын
@@erock37 nice ! You gotten to shoot it yet ?
@erock372 ай бұрын
Next day on the range after taking delivery. First 1911 style owned firearm and OMG!! I most like likely will never purchase another striker fired pistol. 5” TAC Pro is next on the list.
@warrenjoseph26052 ай бұрын
Looks so flat!!
@TheRagingBull2 ай бұрын
Almost makes me look like I know how to shoot !
@keithrange44572 ай бұрын
I really want the tac pro 4.25 to carry. A guy on KZbin "Nightwood guns" did a review and some slow motion vid. It was flat and had a practically instantaneous return to zero. It rises a tad and just falls back to zero. No bounce downward at all. I'm jealous guy 😂
@TheRagingBull2 ай бұрын
@@keithrange4457 I picked up a 4.25 Tac Pro for carry as well as this 5”. Just trying to find a good holster for it. I’d like to use my holosun PID HC - same footprint as TLR1
@Buletspunge5552 ай бұрын
@keithrange4457 make sure you watch Brett's video on ports vs comps. The ported guns throw crazy amounts of spall that can blind you in an close in fight for the gun scenario. He messed himself up, testing it on camera. Ports should be avoided for carry. Comps seem okay by contrast. That and the accuracy issues ports tend to develop. They can really cause the projectile to fly off course at moderate ranges. Between 10-15 yards they're already missing wide. By 25 yards it's worrisome and difficult to hold head sized groups. QVO Tactical has a video showing the problem. Just make sure you understand the pros and cons before commiting to a ported Defensive use gun. As he mentions, learning proper gip technique goes alot further towards controlling recoil than the ports or comps do.
@russiancommy2 ай бұрын
Dang, mine has been "waiting processing".
@Tsand42 ай бұрын
Did you fill out the form they email you in your order confirmation email?
@russiancommy2 ай бұрын
Yep sure did man, They just shipped it today! I'm excited as hell, I've asked a couple of my friends who have the Gen 1 and it took them roughly 10 days of "waiting processing" for it to ship. I did fill out the forms asap, so the FFL was Def not a issue.
@Tsand42 ай бұрын
@@russiancommy I ordered the Axe tomahawk like 6 months ago it shipped in like 4 days ordered the Tac last Thursday hopefully will ship tomorrow.
@TheRagingBull2 ай бұрын
Mine shipped out pretty quick luckily. Maybe because I ordered a 5” and a 4.25 haha
@Just_call_me_Face2 ай бұрын
How do you like that holosun PID light on the 4.25?
@dasniper2822 ай бұрын
Nice! Not one but two. So if you had to pick one, which one would you say is best the 5" or 4.25.
@TheRagingBull2 ай бұрын
I put about 150 rounds through the Gen2 5” and will be shooting IDPA match with it which I’m excited about. The 4.25 I put about 120 rounds through it. The new 5” shoots flatter than the Gen1. Trigger feels just as nice. Really top notch out the box. Measured around 2.25-2.3. The 5” has noticeably flatter feeling than the 4.25 to me - even with the light on the 4.25. With that said the 4.25” is amazingly flat. If I could only have 1 I would get the Gen2 5” but I LOVE the 4.25 and it’s going to make my carry rotation after a few hundred more rounds and I find a holster for it that can use the PIDhc The 20 round mags are very stiff and full at 20 rounds. They also stick out a little more than the 19s even though the baseplate is smaller. I’m wondering if they’ll fit in the IDPA Box. Couldn’t go wrong either way and slightly depends on your use case. Competition / range only I’d get the 5” - if it was for winter carry or something similar I’d get the 4.25.
@Tsand42 ай бұрын
I missed out out the ported new 4.25 I have the regular 2024 4.25 on the way first thing I’m doing is v8 porting it. Luckily my FFL does porting. I have the Axe Tomahawk with the ports will have machinist do holes the same size as them. I’m assuming they are same size ports as on Tac lineup.
@TheRagingBull2 ай бұрын
Very nice ! You’ll have to share how it is before and after the porting - if you’re even planning on shooting it before you have it ported hah.
@Tsand42 ай бұрын
@@TheRagingBull I’m debating if I’m going to port it before I shoot it lol. I have a Prodigy I got for 1100 new getting work done de-mim tuning trigger job etc will probably v8 port that too. I think the Bul 4.25 will be better then prodigy even with all the work it’s getting done to it😂.
@mgamble112 ай бұрын
Just something to consider, because I was going to do the same thing... Getting aftermarket ports will void the Bul Armory warranty, so if something else goes wrong on the firearm, you will be out of luck on a warranty claim.
@Tsand42 ай бұрын
@@mgamble11 I’m fully aware the warranty is only 1 year so I’m really not concerned
@TheRagingBull2 ай бұрын
@@Tsand4 give an update once it’s finished !
@kevf5006 ай бұрын
I see the question below and I also wondered the same thing , reliability wise is it good to go , I saw the same video where a lot of issues with the tac pro 5 inch , Hope it was just a one off
@TheRagingBull6 ай бұрын
Gun is good to go. That video looks like 90% operator error to me.
@foodiegun56636 ай бұрын
Hey there, great shooting! I saw another video of this gun with a lot of problems. Mine have 1 FTF out of 400 so far. I’m trying to see if it’s a common issue. If so, what’s the cause. Are you experiencing any? Thanks.
@TheRagingBull6 ай бұрын
Thanks friend. Appreciate the compliment. 750 rounds so far. Zero problems. This weapon is phenomenal, my favorite pistol by far at this point. I would trust it with my life. The fit and finish is tier 1. Was flawless this IDPA match. Next IDPA match for it this week. I’ve seen a video where a guy kept having battery and “trigger” issues and I can’t help but think it could be somewhat operator induced. Either way I think these BUL’s compete with the higher level of 2011’s. Definitely punch above their weight class.
@rickgeorgette96576 ай бұрын
Hi, can you tell me where you bought this, it seems impossible to find one, thanks.
@TheRagingBull6 ай бұрын
I had an in stock notification for their 5” on BUL Armory website. The 4.25” was back in stock today. www.usa.bularmory.com is the only official website. Lots of scam ones out there.
@bryancolon73457 ай бұрын
Thoughts??
@TheRagingBull7 ай бұрын
Super impressed. Went to the range 2 days in a row just to shoot it again. Nicest fit and finish of any pistol I own. Trigger is around 2.75lbs and is phenomenal. Ordered two holsters last night - one for IDPA and another for carry. We will see how it goes as an EDC but I like it so much I want the option. Wish I’d bought this before. EDIT: one potential negative is that the finish does not seem as durable, I expect it will show wear marks quicker than some but it’s not a safe queen. Will potentially custom Cerakote it if down the road if necessary but no time soon.
@bryancolon73457 ай бұрын
@@TheRagingBull sweet thank you mine is OTW they send it to the wrong FFL and now I have to wait about a week more to get it. Which holster you went for ? I’m looking everywhere I don’t find much.
@TheRagingBull7 ай бұрын
@@bryancolon7345 oh man can only imagine how annoying that is. Let me know how you like it once you get it ! I went with Tier1 Concealed - I currently EDC a p365xl Spec Comp in an Agis Elite so I ordered the same for the BUL. I really love the setup for my p365xl so they got some more of my business. I also ordered the Spara holster for IDPA. Will probably get a competition holster for USPSA / IDPA eventually but for now this will work just fine.
@bryancolon73457 ай бұрын
@@TheRagingBull I love Tier 1 I have walther pdp pro sd compact with Axis Elite and my sig p320 with Agis Elite and I love both but I want to add streamlight tlr 9 to the Bul for more “home defense “ / conceal with jacket or big clothes and they don’t offer lightbearing holster for the Bul Im looking in to QVO tactical, it seems like they have one that It might work with the setup I want but if doesn’t work I will sacrifice my streamlight and go with Tier 1
@TheRagingBull7 ай бұрын
@@bryancolon7345 that’s valid if you really want a light, I’m not big on the necessary for a light for EDC or home PID but I see the argument either way. If you go with the Q let me know how it is though !
@vshtyki8 ай бұрын
Песня
@worst-hd-player11 ай бұрын
Why did you end up switching to the borla x pipe after this?
@lawrencer588 Жыл бұрын
So? Did they need a tune ? Numbers before the tune?
@TheRagingBull Жыл бұрын
Never got a tune. 21rwhp and 25rwtq gain. Can see dyno sheet and Info on this thread www.corvetteforum.com/forums/c7-tech-performance/3749796-arh-mid-length-w-cats-and-borla-x-pipe-no-cats-dyno-results-horsepower-addicts.html
@lawrencer588 Жыл бұрын
@@TheRagingBull That's great! You think I'll see slightly bigger power since I have an Edelbrock Eforce on the car?
@alpha2047 Жыл бұрын
Catless?
@TheRagingBull Жыл бұрын
Sorry for the late reply. Hi-flo mid length CATTED headers. Catless Cora’s mid pipe.
@alpha2047 Жыл бұрын
Are these catless? Any codes?
@TheRagingBull Жыл бұрын
ARH Hi-flow cats. Off road / catless mid pipe. So went from 4 to 2. No codes.
@chrisadkins93513 жыл бұрын
Did you install yourself?
@TheRagingBull3 жыл бұрын
Hey Chris. I did not. Horsepower addicts did the install.
@Kamken813 жыл бұрын
Fast forward to today I ended up buying a 2018 mustang gt pp1 in manual it was great kept it only for 9 months though I just traded it for a 2015 C7 Z51 Corvette A8 last week so far loving it and think I made the correct choice for me after all the manuals I had auto is a nice change. Came by your video again when i was searching for A8 Vs M7 hope you are doing well =).
@GreerAZ3694 жыл бұрын
How was the install? Looking to do this in the spring...Did you have to remove a lot on the passenger side to get access?
@TheRagingBull3 жыл бұрын
Hey Rob! Sorry for the delayed response. Hopefully you got your setup done already. But I actually had the headers / midpipe installed by the shop.
@camilasantos75074 жыл бұрын
Esse não é o levantamento terra?
@ajcarson15 жыл бұрын
Sounds great man! I currently have a borla X pipe and stock NPP with fuse 42 pulled. I'd really like to bump up the volume a good amount (within reason for streets). It seems like ARH midlength or longtube headers might do this for me -- If you had to guess, how much louder did this header make your car under WOT, normal driving, etc? Thanks!
@TheRagingBull5 жыл бұрын
Andrew ! Sorry for the late response. Hopefully you’ve pulled the trigger on this setup. It’s a billion times better for sound, but it doesn’t drone at highway and it won’t make the neighbors hate you. Great mix of the crackle and aggression you want at lower speeds and Rpms without being “glass pack” ish. Can’t recommend it enough. WOT and aggressive driving just plain sounds glorious.
@ajcarson15 жыл бұрын
@@TheRagingBull awesome! I ordered a set of headers about a week ago so I'm definitely excited now! Thanks man.
@TheRagingBull5 жыл бұрын
Andrew Carson fantastic ! You will not be disappointed. It’s how these cars should have sounded from the factory. I got some very nice performance gains out of it too.
@Kamken815 жыл бұрын
I made up my mind going to get the manual C7 i wont be happy unless i do. I have also done the miss 3rd for me when i do it slides between 3 and 5 in my C6 Z51 manual
@Kamken815 жыл бұрын
didnt see him so looks like you won nice pull
@Kamken815 жыл бұрын
i made a comment on one of your corvette videos thats how i found your channel just wanted to say I also play POE mostly just on standard with legacy magic find character 142% iiq on a tectonic slam jugg works out pretty well its level 95 and i dont care if i die which isnt often can kill t15 bosses but mostly farm burial chambers.
@Kamken815 жыл бұрын
short shifted 3rd could have gotten even more ahead even though you already won. Im at a toss up right now i dont know what one to get right now i have a 2009 z51 manual that im going to be trading in for a C7 z51 i want the A8 for the 0-60 and 1/4 times just floor it beast mode but I also love driving manual only thing with the manual that kinda sux is im always just skipping 2nd gear altogether like i just do 1-3-6 or 1-3-5-6 or 1-4-6 like with the shorter gearing of the z51 normal driving and going into second is pointless I have a skip shift eliminator also like 1-3 feels way more normal almost feels like 2nd is also 1st gear I know i should be getting the manual and just be done with it but watching those drag racing clips of A8s just shifting lightning fast is kinda getting me wanting it but i would so hate to go spend like 45k on a car and hate my choice in transmission in a month or so because once i had a 99 transam ls1 6speed manual that i traded for a bmw 330i convertible automatic i instantly regretted it and ended up trading it in for a camaro ss ls1 manual later that year that was many years ago but right now i have the C6 corvette manual and love it just the slow driving granny shift skipping gears is kinda blah feeling but all out drag racing or just banging out the gears hoping i dont get pulled over is very fun just the times i go all out and very few in between which is where the auto just smooth shifting would come into play this is just one long run on sentence i know but i dont know what to do im about one month from buying my car is free and clear for trade.
@TheRagingBull5 жыл бұрын
Thanks for the comments and follows bud. POE and Corvettes ! hah Glad to hear you decided on the M7 too. its fun
bro what did u take on ascendancy cuz i cant find it on ur build. Can u write under my comment please ?
@TheRagingBull5 жыл бұрын
Its under the Skilltree section of the guide - but I did Swift Killer - Ghost Dance - Escape Artist - Harness the Void. in that order.
@moiday11475 жыл бұрын
pob plz?
@TheRagingBull5 жыл бұрын
www.pathofexile.com/forum/view-thread/2473803 build guide here with POB added to description. thanks
@jefferyjones41575 жыл бұрын
Do you have aftermarket cai?
@TheRagingBull5 жыл бұрын
no
@jefferyjones41575 жыл бұрын
Is this stock mufflers
@TheRagingBull5 жыл бұрын
The NPP exhaust option, but yes, stock.
@danhoward54766 жыл бұрын
Did you tune with this setup? Do you have before and after Dyno numbers? Looking at doing the same setup. Thanks bro!
@TheRagingBull5 жыл бұрын
HI Dan - I did NOT have to tune the setup. 419 to 440 rear wheels! see my thread here www.corvetteforum.com/forums/c7-tech-performance/3749796-arh-mid-length-w-cats-and-borla-x-pipe-no-cats-dyno-results-horsepower-addicts.html