Man...what you did to that 7.5 on GBODY FORUM...classic ish.
@terrancemcdaniel695Күн бұрын
I got Holley mounts and crossmember too do I have to use black heart headers I’m doing elco also
@elcowarrenКүн бұрын
At the time I bought the system, I was told I’d have to run the whole system-oil pan, crossmember, headers. They stopped production of those headers tho. If you find a header that works with em, let me know…🙏🏾🙏🏾🙏🏾
@nicgooden6349Күн бұрын
🎉💙 How can you kill & be ALL the Way LIVE at the same TIME
@elcowarrenКүн бұрын
😩😩🤩🤩🤩🙏🏾🙏🏾🙏🏾🙏🏾🙏🏾🙏🏾🙏🏾🙏🏾🙏🏾 Man! I appreciate that love fam!!!🏁🏁🏁🏁🏁🏁🏁
@nicgooden6349Күн бұрын
Your for thought to see all these little things change the game. 🫡✊🏾🫵🏾
@elcowarrenКүн бұрын
🙏🏾🙏🏾🙏🏾🙏🏾 Thanks fam! I try to draw it all out and plan ahead for the mods I wanna do. Really appreciate the feedback!🙏🏾‼️🙏🏾‼️
@grindschoolКүн бұрын
Congrats bro it looks super clean
@elcowarrenКүн бұрын
@@grindschool Thanks fam!!!!!!! Wish I had a rotisserie but I got it going with the homegrown backyard boogie tools I had here. One step closer!🙏🏾🙏🏾🙏🏾🙏🏾
@elcowarrenКүн бұрын
Chapters…. 0:00 Intro 4:03 Fuel Pressure Gauge Setup 7:16 Sanding front Frame section 8:28 Rear end Lookover 9:37 Frame Mock Up 13:30 Spraymax 2k Galmour Clear 17:26 One Week Later….. Frame is Going In 20:27 Frame is Mated 21:53 100% In. Tightening Bushings 25:02 Outro
@87SSBOI2 күн бұрын
I’m thinking about going black hurst pistol grip👀🤔
@WarrenGBody2 күн бұрын
Yessir!!! That will most def go hard af with the console and other clean mods fam. 🔥🔥 I got this shifter for damn near pennies, but I won’t use it in this project. I want a newer styled trans in the S
@502whips_6 күн бұрын
Watching your videos always reminds me just take my time with my cars
@elcowarren5 күн бұрын
Yesssirrrrrrr!!!! Fam thank you for tuning in on em. We motivating each other!!🏁🏁🏁🏁
@502whips_6 күн бұрын
Hell yea that good shit my guy keep going it only up from here og
@elcowarren5 күн бұрын
🙏🏾🤩🙏🏾🤩🙏🏾🤩🙏🏾🤩
@nicgooden63497 күн бұрын
Congrats on the subscribers. That rear end is on point. Keep setting the bar as usual
@elcowarren7 күн бұрын
@@nicgooden6349 Thanks fam!!!!!! I happened to see the number and was like oh wow! Cool! I should have the frame mated to the body soon. Everything is pretty much done..🙏🏾🙏🏾🙏🏾🙏🏾
@nicgooden634910 күн бұрын
A whip built to change the game. 👏🏾👏🏾
@elcowarren9 күн бұрын
🙏🏾🙏🏾🙏🏾🙏🏾 Appreciate the love!!!!!
@SprayWayCustoms11 күн бұрын
Looking like new money 🔥🔥
@elcowarren10 күн бұрын
🙏🏾🙏🏾🙏🏾🙏🏾 MUCH APPRECIATED FAM!!!!!!!💪🏾💪🏾
@tonym685411 күн бұрын
Keep it simple. More reliability and still very strong on the street
@elcowarren10 күн бұрын
I totally agree. I’d hate to tear open new motors to prep em for boost. My malibu is twin turbo so I’ll roll with that and be happy. HP is addictive lol! I may build a motor later and set it all up for boost (lsx376b15 😉)
@jdubcbr60012 күн бұрын
this song hits
@elcowarren11 күн бұрын
💯‼️‼️‼️‼️
@kingdukeiii532713 күн бұрын
What about ac?
@elcowarren12 күн бұрын
@@kingdukeiii5327 Dawg I know you see those ac controls under the deck right? The stock control unit is out tho-Dakota Digital controller and a Vintage air setup is in. AC Playlist kzbin.info/aero/PLiXzcW_uy4KtJ-5V_8oCnhvPHg0rRq7SR&si=80RwYRChoiigR6fG
@Elco-Ant18 күн бұрын
Sup bro have you seen or used the por15 in white
@WarrenGBody12 күн бұрын
Only the top coat. I’ve never seen the actual POR-15 in any other color but black and maybe silver. The top coats come in white tho.. Answering from my other channel fam.. if you go with POR, you gotta use the etch from them or it will peel off. It’s a nice coating tho. Levels out real pretty even with a paint brush. But it needs to be top coated
@dylanfay842819 күн бұрын
So what did you prefer, the por15, or the paint. On video they both look good . I'm planning on coating my frame in a few weeks and can't make up my mind.
@WarrenGBody12 күн бұрын
I like the Tamco over POR-15. POR is nice, but it lacks the UV protection, you MUST use all their products or it will peel. The Tamco is a Por killer-2k and direct to metal-also no need to top coat-its uv protection is great. Only downfall for the diy’r is you gotta spray it out a gun.. This is Elco.. answering from my other page….
@thereflectionartist19 күн бұрын
What up Doe!
@elcowarren19 күн бұрын
🏁🏆🏁🏆🏁
@SprayWayCustoms22 күн бұрын
Frame looking real spiffy fam 🔥🔥
@elcowarren21 күн бұрын
@@SprayWayCustoms Aww fam!! MUCH appreciated!Applied what I’ve learned from watching your uploads🙏🏾🙏🏾🙏🏾🙏🏾🙏🏾
@grindschoolАй бұрын
That’s a fact lol! Harbor Freight/Amazon for the win. Man you motivate me to take the frame off the Monte. Idk if I will but I really want perfection with that car.
@elcowarren29 күн бұрын
Yep!! HF and Amazon guns FTW!!! Perfect for jobS like this cuz they are cheap throw aways. I thought the HF gun failed on me, but the mix hardened up cuz I took too long to spray it-I was fighting the wind-paper flying up ect ect. Had to toss the gun out. You can actually get the frame nice even with it still In the S! I did the el like that before and was really happy with it. Thanks for stopping thru bruh!!🙏🏾🙏🏾🙏🏾🙏🏾🙏🏾
@JenaveescottbballАй бұрын
Can you change the color to the numbers and stuff or are they all white
@elcowarren29 күн бұрын
@@Jenaveescottbball they stay white. I was trying to find a board that would let me swap colors but no luck…
@HawthorneBuiltАй бұрын
😎😎😎
@elcowarren29 күн бұрын
🙏🏾‼️🙏🏾‼️🙏🏾‼️
@elcowarrenАй бұрын
Longer detailed vid below on @warrengbody page kzbin.info/www/bejne/pqu3ZKObj7hnq6ssi=pRxXaScX0QslCNC9
@DashsgarageАй бұрын
Everything touched. Most wouldn't even think about the amount of work you have into your cars.
@elcowarrenАй бұрын
MUCH appreciated young fam!!!! You know how we do!!! It’s in us to just get her done!! Thanks for shootin thru and checking it out. Uploading the short edit here and the longer version on @warrengbody feed 🙏🏾🙏🏾🙏🏾🏁
@robertfranklin8104Ай бұрын
That's right big dawg I would be this far if it wasn't fir you answering all my questions I had! -rob
@elcowarren21 күн бұрын
@@robertfranklin8104 YESSSSIRRRRR Excellent work bro!!💪🏾🏆💪🏾
@mackbee5763Ай бұрын
Good stuff bro ✌🏿
@elcowarren21 күн бұрын
@@mackbee5763 🙏🏾🙏🏾🙏🏾🙏🏾🙏🏾🙏🏾🙏🏾🙏🏾
@502whips_Ай бұрын
My guy putting in work as always
@elcowarren21 күн бұрын
@@502whips_ much appreciated fammo!! 🙏🏾🏆🙏🏾🏆🙏🏾
@502whips_Ай бұрын
👏🏾
@waynelogan5943Ай бұрын
❤❤
@barnardkemp9693Ай бұрын
Nice setup
@elcowarren8 күн бұрын
@@barnardkemp9693 🙏🏾🙏🏾🙏🏾🙏🏾🙏🏾🙏🏾
@502whips_Ай бұрын
🫱🏾🫲🏿🫱🏾🫲🏿🔥🔥🔥
@elcowarrenАй бұрын
MUCH appreciated!!!!!!!! 🙏🏾🙏🏾🙏🏾🙏🏾🙏🏾🙏🏾🙏🏾🙏🏾 Almost done with the panels. Got em re coated in bed liner and I’m doing the final polish on the clear coat. Not perfect but man I’m learning a lot!🎯🤩🤩🎯
@nicgooden6349Ай бұрын
🎉 can't say it enough ATTENTION TO DETAIL 👏🏾👏🏾
@elcowarrenАй бұрын
🙏🏾🙏🏾🙏🏾🙏🏾🙏🏾🙏🏾 Much appreciated fam!!
@mikemckee6299Ай бұрын
Dam fam need this but can't find it
@kindhate84092 ай бұрын
That’s a SEXY G-body on her!!
@elcowarrenАй бұрын
🙏🏾🙏🏾🙏🏾🙏🏾🙏🏾🙏🏾🙏🏾🙏🏾🙏🏾
@pechaboii2 ай бұрын
Hey there Elco Warren, I was checking out your KZbin channel and noticed some SEO optimization errors which are most likely causing you fewer views on your latest video and others. Mind if I have your email to share a quick video that I recorded for you to explain further?
@deathcoastrecords48212 ай бұрын
How hard is it to move the ac controls to the bottom?
@elcowarren2 ай бұрын
Not hard at all. The control box doesn’t have any stress on it.
@dallasthomas642 ай бұрын
Who makes this bracket I need one
@elcowarren2 ай бұрын
The homie @justjapperformqnce on IG…
@dallasthomas642 ай бұрын
@@elcowarrenthanks man
@elcowarren2 ай бұрын
@dallasthomas64 yessir! I’ll try to post a link to his IG page. Not sure if it will be “clickable”… instagram.com/justjap_performance?igsh=MzRlODBiNWFlZA==
@Elco-Ant2 ай бұрын
Hey does elco Marcus have a channel
@elcowarren2 ай бұрын
Yep. No vids are up tho. If you tap his @ in the vid title, his page Info and link pops up 😉
🙏🏾🙏🏾🙏🏾🙏🏾🙏🏾 Man I wanted the taller version but I got this one new at a killer deal. Couldn’t pass on it. Wish Holley still sold those Blackheart headers.. I need another set for my SS
@TheMotoboys12 ай бұрын
@@elcowarren Good shit you doing big thangz over there! Thanks for posting and sharing!
@freddiejames93242 ай бұрын
Bros did u ever put a kit together in process of doing that work
@elcowarren2 ай бұрын
Naw fam. Any work done was just me trying to stuff and seeing what would work
@hoodstarperformance47582 ай бұрын
🔥 🔥 🔥
@elcowarren2 ай бұрын
🙏🏾🙏🏾🙏🏾🙏🏾🙏🏾
@rongamble98843 ай бұрын
I use to be hard core all about wet sanding then i finally converted to machine sanding with orbital sander
@elcowarren2 ай бұрын
I’m still trying to get a system down I have some sponge/foam 6” interface pads coming and imma try my hand at damp sanding with the air tool. Ill use a rigid flat block with 1500 and then the air tool with 1500, then 2000 and then 2500. See how that combo works. This has been really fun so far, using this cheap paint job to learn from..
@rongamble98842 ай бұрын
@@elcowarren if I have trash I have a 3 inch mini sander I nib out with then I start with 1,200 1,500 2,000 all dry and one last round of 3,000 these clears today are alot softer and they level out way better than before I use Sherwin Williams refinish systems
@elcowarren2 ай бұрын
@@rongamble9884thank you for these pro tips!!! Pretty excited about all of this.. I see I’m getting pulled deeper into the rabbit hole haha..
@thereflectionartist3 ай бұрын
Try Griot's Garage Fast Correcting Cream
@mrbrankroll48853 ай бұрын
We see you champ. Gonna attack my boat this weekend. Can wait for the booth content. The elco is gonna be crazy when it's done
@elcowarren3 ай бұрын
🙏🏾🙏🏾 I have that and a few others coming..I’m getting pulled into this rabbit hole lol. The Da polisher u have now is perfect for learning with, but you man get a Dewalt setup and a couple other DA options.
@elcowarren3 ай бұрын
Yessssirrr!!!!!!🙏🏾🙏🏾🙏🏾🙏🏾🙏🏾🙏🏾🙏🏾🙏🏾
@danielfontanez29163 ай бұрын
Hi whats the name and part number of that shifter? I want to buy one 😊
@elcowarren3 ай бұрын
B&M Quicksilver…. Summit sells em.. I dont have the part number off hand but a search on summit racing’s website with keywords will get you right! Love this shifter…🏆
@danielfontanez29163 ай бұрын
Thanks 👍
@danielfontanez29162 ай бұрын
Hi. I bought the shifter, when I install this do I have to put the car in neutral? This will be the last time I text you I don't want to be a bother.😊
@elcowarren2 ай бұрын
@@danielfontanez2916 Oh no worries! You want the shifter AND trans to be in park. The cable cannot have any kinks or sharp bends as it goes thru the floor. The cable loops around the trans and goes thru the bracket you mount on the transmission. Do a search for the Quicksilver installation here on KZbin. There’s a bunch of how to vids. Be sure to read thru the included instructions THOROUGHLY!!
@danielfontanez2916Ай бұрын
Hey I mounted my quicksilver ratchet shifter to my 2012 Honda Civic coupe LX automatic. It's cool and fun. I like it 😊. Thanks for your help and advice 👍