Keeperof Themountain

Пікірлер

@thesteamybox7936 12 күн бұрын

oh FFS, chin up! 🙃

@tracklifex5259 12 күн бұрын

Just a LITTLE side job. ALOLMAB 🍻🇦🇺👍

@damiansgaragebuilds7663 12 күн бұрын

Bummer!!!!

@seetheforest Ай бұрын

I'm making a Frankenchevy 300 myself. I'm going to delete the EFI wiring, air pump, EGR.. map , icm, ECM, all the temp sensors. Gone. 😊

@KeeperofTheMountain Ай бұрын

What carb are you going yo run?

@seetheforest Ай бұрын

@KeeperofTheMountain I found a two barrel side draft carb. I think it fits a Volkswagen. 45mm. 45 DCOE L28 engine I hope to drill and tap it right onto the plenum where the throttle body is.

@KeeperofTheMountain Ай бұрын

@@seetheforest That could be interesting

@teddwilliams1887 Ай бұрын

The book called Roughing it Easy. Back in 1973, 74, had this idea.

@KeeperofTheMountain Ай бұрын

Yep, Pretty much that there are no new ideas, only new audiences.

@bluegarren9361 2 ай бұрын

What's the engine?

@psychotrucker9880 3 ай бұрын

My back hurts and I think I got a hernia from watching them picking it up

@ventureJeffrey 3 ай бұрын

I needed this. Thank you

@LuckyDCL 4 ай бұрын

You get a BIG A + for your video, it helped through every step of the install that I did when my propane stove arrived !!!!! Thank you !!! I had two plumbers here and because I had watched your video twice, I sent them home and did the work myself and saved a bundle. Nice job my friend !!!!!

@KeeperofTheMountain 4 ай бұрын

I am glad I could help. Thank you for watching.

@StefanMarjoram 4 ай бұрын

Definitely looks better lower. It may not be possible but I think it would help a lot to pull the car out and walk around and see it from a distance and different angles. Perhaps a bit of CAD (cardboard added design) to try out a few things before committing to metal. Looking forward to seeing how it turns out.

@KeeperofTheMountain 4 ай бұрын

I wish I could but, Currently I cannot take it outside. Space is so limited that I can only work on one side at a time. I have it on the car dollies so that I can work on one side and then roll it sideways and then work on the other side.

@StefanMarjoram 4 ай бұрын

@@KeeperofTheMountain That sounds really tricky!

@KeeperofTheMountain 4 ай бұрын

@@StefanMarjoram That is what happens when you try to build a car in a shop designed for a Model T.

@StefanMarjoram 4 ай бұрын

@@KeeperofTheMountain Haha, the best of luck!

@chrispellicci6587 4 ай бұрын

My second favorite DJ5 video

@KeeperofTheMountain 4 ай бұрын

Thank you for watching. It was fun filming it.

@thesteamybox7936 4 ай бұрын

Yeah closer to the original Merc style

@thesteamybox7936 4 ай бұрын

Drop the end tail down....to the bottom of the frame (don't ask me how ;)

@thesteamybox7936 4 ай бұрын

That old C channel would work upside down as mounts wouldn't it?

@thesteamybox7936 4 ай бұрын

I thought your welds were sh!t (and they are ;) but those factory welds are something else :P

@magnuszerum9177 4 ай бұрын

Grandiose posteriors can go too far. I do recommend using the entire hood as the trunk lid. I know I'm addicted to the practical, but I've never run into anyone who complains they have too much access to their trunk. It will also make it easier to transition from whatever sheet metal you come up with to the old hood if it's the seam. Putting a hatch in the old hood as your trunk lid just adds a new seam you have to finish and seal.

@KeeperofTheMountain 4 ай бұрын

@@magnuszerum9177 That is a thought.

@myhillbillyways321 4 ай бұрын

i like it, i like it a lot, mmmm where did that come from?🤠

@tracklifex5259 4 ай бұрын

Much,much better. I like seeing some of the suspension too. One step back and two steps forward. ALOLMAB 🍻👍🇦🇺

@KeeperofTheMountain 4 ай бұрын

@@tracklifex5259 I just couldn't take it that fat.

@CurtLoewenstine 4 ай бұрын

I like it MUCH more not high. But I’m the end it’s all yours and either way you will make it look good. Keep it up brother best of luck !

@KeeperofTheMountain 4 ай бұрын

@@CurtLoewenstine Thank you

@RustBucketYT 4 ай бұрын

I understand what you mean man. I have several ongoing projects and plenty of ambition but sometimes the tools don’t serve us.

@magnuszerum9177 4 ай бұрын

The top of the stationary portion of your trunk should not me high that your waist or you won't be able to get stuff out of it.

@KeeperofTheMountain 4 ай бұрын

I see a whole host of problems going on here. You make a good point.

@CurtLoewenstine 4 ай бұрын

Sorry I have no suggestions I can’t fix a thing. But I will add you are an extremely patient man ! Maybe since I’m just a meathead bodybuilder I would be throwing things and so frustrated 😂. Good luck and I know not only will you get it right but it will be done correctly and look great !

@KeeperofTheMountain 4 ай бұрын

Thank you for the vote of confidence.

@tracklifex5259 4 ай бұрын

I’d lower it down at least 6 inches and then see what shape you need. Maybe try splicing the base to fit the top . Alolmab and a can do attitude.🍻👍🇦🇺

@CurtLoewenstine 4 ай бұрын

Glad to see you back brother ! Hope you’re doing well and thanks for sharing with us all.

@KeeperofTheMountain 4 ай бұрын

Thank you for watching.

@damiansgaragebuilds7663 4 ай бұрын

Looking great!!! I started a sandblasting business , haven’t touched my boattail in almost 2 years… we did just move into a bigger house with a two car garage. I’m gonna get back on her …She’s so close to running!

@KeeperofTheMountain 4 ай бұрын

@@damiansgaragebuilds7663 I hope your business is going well. I look forward to seeing you get back to the cabin speedster. It is a one of a kind n

@tracklifex5259 4 ай бұрын

My hat is off to you sir. I’m not able to take on a full build of a unique vehicle like you have. Thanks for sharing.ALOMAB.

@KeeperofTheMountain 4 ай бұрын

@@tracklifex5259 Thank you for sticking with me on this one. Sometimes it gets overwhelming but then I remember that it is like eating an elephant. One bite at a time.

@JimmyCox-q8b 5 ай бұрын

Bad ass woodchuck s

@desertswamprat 5 ай бұрын

I participated in pulling 3759 forward in 1987.

@KeeperofTheMountain 5 ай бұрын

That is very cool. Thank you.

@davidcraig7771 5 ай бұрын

Thank you

@KeeperofTheMountain 5 ай бұрын

You are welcome.

@EduardoJimenez-rk8nw 7 ай бұрын

What's the HP of this engine ? And how much would it cost ? Could it be used to generate electricity ? 👍🙏

@gerrit1263 7 ай бұрын

good review thanks

@terryw.milburn8565 7 ай бұрын

Really Enjoyed This Zac Bring Us More Soon ! ATB T God Bless

@KeeperofTheMountain 7 ай бұрын

I hope to get better at it Thank you.

@terryw.milburn8565 7 ай бұрын

Sure Are Getting Closer Zac ! Great Progress Thanks For Sharing ! ATB T God Bless

@KeeperofTheMountain 7 ай бұрын

I appreciate you coming back all of the time. Now I have a lot of welding to do.

@CurtLoewenstine 7 ай бұрын

I must tell you I’ve been watching your videos for so long. You and I couldn’t be more opposite I’m a world champion powerlifter and now competitive bodybuilder and I can NOT fix a thing. Came across you looking for Swedish torch stuff. Brother you are so enjoyable to watch and love your videos I don’t miss any of them love watching your car being built. You’re entertaining and REAL ! Thank you for sharing and keep up the great content always looking forward to more. It’s the only non weightlifting channel I subscribe to thank you keeper !

@KeeperofTheMountain 7 ай бұрын

Thank you for watching! I wish you success in your power lifting. That is a sport I was not built for.

@RustBucketYT 7 ай бұрын

That is a pretty cool idea in my opinion.

@KeeperofTheMountain 7 ай бұрын

Thank you

@myhillbillyways321 7 ай бұрын

cool ballad good job🤠

@KeeperofTheMountain 7 ай бұрын

Thanks, It was my first effort. No doubt a lot of room for improvement. In order to be good at something, you first have to be bad at it.

@tracklifex5259 7 ай бұрын

I liked the ingenuity, not so much the execution. 🫣alolmab 👍

@KeeperofTheMountain 7 ай бұрын

Yeah, sometimes a good idea does not translate real well.

@shaun4bigblocks993 8 ай бұрын

Two kicks to the nutz for the two times you forced that in-breeded music on us, and yet another for installing them backwards...

@johnnyberning 8 ай бұрын

Good video.....I modified my last one with a hole in the top to enable reading with an instant read thermometer....

@kenwright3159 8 ай бұрын

Looks like a mole judging by those claws.

@laponcheradezarco4142 8 ай бұрын

wow fantastic great Job my friend there is always new things to learn Amazing

@KeeperofTheMountain 8 ай бұрын

Thank you for watching.

@jabbadahutt-up1en 8 ай бұрын

Tank seems pretty gutless.

@BlackHawkBallistic 8 ай бұрын

Nah, the car was just being pushed until the end there, if it didn't slide it would have climbed it faster

@12babyapes59 8 ай бұрын

If anyone thinks this is real, shame on them.

@tkso.philly-7868 8 ай бұрын

You obviously were never in the Army/Marines. It's real.

@ASLDorianTowns 8 ай бұрын

I remember that day!!! It was exciting!!!

@KeeperofTheMountain 8 ай бұрын

I was glad you guys were there for the event!

@jim6495 8 ай бұрын

Beautiful engine, looks just like mine minus the carburetor:)

@KeeperofTheMountain 8 ай бұрын

Thank you, I put a lot of work into it,

@JayCharland-lg5bz 8 ай бұрын

Fix the timing😅

@KeeperofTheMountain 8 ай бұрын

The carb was so bad that I could not keep it running long enough to fix the timing. I am waiting on parts. In the mean time I am building the body.

@charliejohnson6416 8 ай бұрын

Just a liiiiiitttle too advanced 😂😂

@McGregor007 8 ай бұрын

Whoop. There went half the mustache. 😆

@61impala 8 ай бұрын

Costco has the NXR 3 burner for 99.99

@terryw.milburn8565 8 ай бұрын

Love The Progress Zac ! Great Value Zinger Wire Buddy ! Hugs For Lil Sophie ! ATB T God Bless

@zmadpoet8 8 ай бұрын

The Goatee looks good on you.

@KeeperofTheMountain 8 ай бұрын

Thank you

Ең жақсы KZbin

Пікірлер