Is anybody else really struggling to unscrew the tip? I can't do it and I think it's clogged so can't get in to clean it

My first disassembly went rather well, thanks to you. I was having some trouble with my trigger, it wasn’t sitting correctly. Hearing you explain how it should feel when engaging the valve made me realise it needed to be nudged slightly. Fixed everything. Thanks!

Hey, I realise you stopped making videos 5 years ago so may not see this, but I was wondering if you could give the dimensions of the base you made please?

Dang, shame that this video is how I find out my nozzle retainer is severely overtight

Thank you for this! Still relevant 7 years later haha

Am I wrong or is there no part 2?

This video is exactly what I needed! This is my first airbrush and I have absolutely no idea what I'm doing. Thank you for your clear, direct instructions!

More lub is not better. When you lube something wipe off excess please. A very thin layer is all that is required.

I have no idea what i did wrong, but the second bigger nozzle piece will not budge when i try to take it off. I really hope it didnt seize up or snything like that.

My trigger won't press down and there's a mystery spring in the box (looks like a plunger/airvalve spring) but I don't know where it's suppose to go. Any advice would be appreciated.

You have just saved me big time! dropped my brush and trigger came out and could not find my instructions! thank you so much

This helps so much thank you!!

Thanks for the help man!

Se si infila da dietro l’ago se non mano ferma si rischia di rovinare la punta piegandola!, provare infilare da davanti e vedere che non si rovina niente.

Consiglio da uno che usa aerografi da 30 anni: perché dopo aver smontato la duse in punta all’aerografo, non lo smontate sfilandolo da davanti così l’ago pulito dietro non rovina gli O-ring interni che siano in gomma più delicati o in teflon, visto ve lo sfilate all’indietro una minima sporco attaccato all’ago consumerebbe la guarnizione e porterebbe alla lunga sporco di colore dietro?. Provate a farlo, io ho aerografi di 30 anni e facendo questo modo durano e non si rovinano.

Auto modificato il grilletto spruzzo più alto?.

Clogger bottles are imprecise overrated dogshit.

Can you link me to the 1.5 mil wrench needed to disassemble the plastic piece near the bottom valve?

Wish I never took it apart , absolutely cannot get it back together

Thank you for the review! I made a conclusion for myself: the detail is terrible, we took a 3d editor and zoomed in :) I don't think I have a place for this guy

Great tutorial. I’ve had mine for about 20 years and it sat in its wooden box that whole time. Out of necessity I just started using it and wow it’s amazing. One thing though …My needle won’t come out just by loosening the needle Chuck. When I try to remove the needle it springs back into the handle. Any idea why?

You saved my badger ! Thanks

I’m new to airbrushes. I didn’t clean mine well enough and had to soak and disassemble it after use. Your video helped so much!

Really helpful guide! Thanks for putting this up!

OMG You’re a hero!!! I couldn’t figure out the D-shaped parts. I was also baffled for the longest hence why I searched for this video. This earns you a new subscriber.

thank you for this!

"It's American made quality" Don't worry, it still works fine, despite being American made. Give it a chance.

Very helpful, thanks!

useless when the camera is 500 fucking feet away - have a great view of the backs of your hands shit for brains

My 20 20 bubbles when I pull the trigger back and no pait comes out is the nozzle blocked with paint as I gave it a good clean last time I used it

Thank you so much for this video, it really made my jump into airbrushes a lot easier

How amd were do I subscribe to get this collection? How many are there in future?

My Xtreme did not have the black rubber O ring at the front of the airbrush. Is this something they changed or was mine missing a piece?

exactly what i was looking for

on my patriot the piece on the gun where you screw the quick connect to (under the black plastic that is below the name) that piece separated from the gun how do i fix it

I commented

all this effort EVERY time you airbursh (not needed) and you don't even clean the cup lol.

Thank you for this video. I'm ready to attach my warlord to it's base, but I need to make one first! Gave me a lot of confidence in the process, so very much appreciated 👍 The Emperor Protects

Very good thank you

Good explanation, but I got stuck at 5:30 during the re-assembly, and found that I had to first thread on the spring-loaded trigger-return rod and verify it operated correctly, THEN the trigger back plate, and LASTLY the trigger itself. Once the needle is inserted it all comes together, just like TPS says. The caution regarding the trigger-return rod you mentioned during disassembly helped tremendously. Thanks for posting this!

the first time I worked with resin, I did not wash it. This should have been done! Thank you for the video!

Thank you, very helpful as I get back into airbrushing with my 105. Best, Andy K

10/10. Now I know how to clean and replace the needle. 🙂

Big help. Trigger was out for cleaning and then the 'back lever' (part #20-114) wanted to misbehave. Sorted!

Thank you!! I got mine apart and couldn’t figure out why it wasn’t working. I had gone farther than you and taken the brass piece off and the spring out.

Is there a basic/beginner book you would recommend?

Are those high triggers more comfortable than the regular height ones.

Working on my first resin model and I can’t tell you how hard it was to find instructions for this. Thank you!

What model number is the swan morton you are using there, as they're seems to be different model numbers out there

Thanks for the video. I have the same brush and have always had issues with the dis/reassembly. Good, clear instruction. Thanks