Thanks

no photoflow?

Who are you brother

37343 Misael Island

Correct me if I’m wrong, but wouldn’t you want to use the 0.020 wire? The code book says over 0.75 to 1.50. I think you would want to go with the 0.625-0.75 since the material is 3/4”.

Bogisich Ports

White Anna Miller Jose Clark Steven

I want to buy a second-hand USM35. Do you have any recommendations?

I want to buy a second-hand USM35. Do you have any recommendations?

Hernandez Lisa Jackson Gary Thomas Maria

What the name of this device ?

If you proceed to do more videos please slow down and pause from time to time to let folks absorb what you’re saying.

very useful bro since now i have to work with this thing...

Sir..what is the meaning of first skin depth and second skin depth This confused me . And the skin depth formula is correct yeah when I look at my book the formula is different. Pls clarify this one

Thanks

do you have the epoch 650 that you could do a calibration video for? A-scan straight beam and angle beam.

I seem to understand it better after I hear you explain it. Thank you for posting these videos.

So Lame 😂💀

man, this made so much more sense watching this video rather than trying to understand it from my ASNT Book. Thank you so much!!

Gloves mate please

Can you explain what the delay for on the test thank you for the help

Great teacher

Thank you so much for super useful information

Thank you I'm using this machine for the first time today and this video helped me.

Do you have any videos with velocities in 10^5 cm/s and m/s being converted to mm?

Dark room I studied this one

Thankssss

Awesome, thank you

Hey prebhu hey hariram 🌝

My parents had one of these in their office years ago when they first opened their office. Then digital became a thing and they never used it again.

This guy is so good 👍

I came here by accident and I feel like I learned more than I needed to know lol

Nice

Man you make it look easy! my professor made us scan 10 plates yesterday and I just got 4 plates done ( he told me to turn it in). What gets me confused is when you scan a little signals pop up ( we were using the weld probe). looks like i'm going to fail that particular assignment ( i hope i get quicker in scanning plates)

hi joe! i am in a diagnostic imaging class and came across your very helpful video!! thank you! i was wondering if the water had to be distilled or not?

Dear Joe Could you please share a video on which you illustrate and explain the way I can calibrate this machine?

Sir please tell me if this depth of penetration formula can be used also the same for tube inspection? And please help me the formula for the maximum penetration in NEARFIELD TUBE TESTING..would be a very big help for me. MANY THANKS AND REGARDS.

is there any way you can get the permeability of a material without the Magnetizing force and Magnetization ( and they are not given in the problem)

Howdy! I grab this vid to learn some terms of ultrasonic method Thanks no end! Bye for now

this USM35 works for determining steel grade (steel yield stress or ultimate stress) ?

So the pie gauge is not something that could be used in a arc gouged backing weld ? Bottom of a arc gouged bevel would only be 3/8" wide .

appreciated😍

Appreciated

I got a quick question, let say your plate thickness is .625" or 5/8", using a 10" range screen. What will be my paremeter to watch for on my screen in order to eliminate irrelevant reflection on my screen?

EPOCH 650 UFD - Ultrssonic Flaw Detector Navigation Pas is good or Knob Configuration which is good for site work and Training

The purpose of an emulsifier is to?

#radiologyfundamentals

Thank you!

If you reposition and re-shape the eddy current-inducing coil so that it horizontally laid out (instead of the vertical orientation), the eddy currents are induced and stretched-out over a larger surface area of the metal. You end up with horizontally-oriented eddy current in the metal layer. We then position a vertically-oriented static magnetic field. Since the 90 degree cross of electric (eddy) current with a magnetic field results in the Lorentz force, the charged particles in the metal are coherently accelerated by the Lorentz force. Our horizontally-oriented eddy current coil is fed with very high frequency (RF). The result is - immense accelerations of the charged particles in the metal. Our test device consists of ten layers of aluminum foil, each layer separated by insulation. The thickness of the aluminum foil has a 'skin depth' for a frequency of 10 Mhz. Very nice, very clear explanation of eddy currents - thank you!

My dear gawd squire you're heaven sent I have a paper tomorrow and near field and beam spread have been kicking my ass