Don, Thanks for answering that age old question. Your recommendation of a slight bend in the metal piece is key. Thanks again. Bill

Well how do you put it back in?

I bought one for my Japanese sewing machine but there aren't any instructions which I find VERY dangerous. Mine is 100v step down/ step up 110v -120v. I can't fit my Japanese plug into the converter, something is so wrong........ I don't think things like this sould be sold without instructions. I am in America and I want to use my 100 volt sewing machine. I have the one like yours that I used to use to heat water in my Korean ceramic tea kettle. It worked beautifully. Why do men always feel the need to tear things up and monkey around with things. Like you unscrewed this thing and used some electrical doodad to see how much electricity is going through it???

I had one in my youth. I still have no idea how a transistor works!

Hi Don. Looks like a nice bike ride, after I got used to biking at 100 miles per hour, haha. I wanted to ask you if you thought of adding drone (i.e. aerial-view) video to a bike-ride video. I think that would be great. But unfortunately my experience with any camera, still or video, has shown me I have no talent for photography. I thought your video of "Gravois Bluffs Evening 8/27/2023" showed that drone's camera to not be very good, where this video makes me think the camera used was a pretty good one. Maybe if/when I ever try making a bike-ride video again I should buy a GoPro Hero 8 4k, since that's what you say that you used. I liked the MAP, the way you inset it into the video. Seems like a couple of short aerial-view (drone) bits would be good, too. They have a feature that the drone will follow you while you move, right? --Could follow you from above while you go through some difficult traffic situation, for example. Also, thanks for your review videos of DROK multimeter , which is how I discovered your videos today.

Thank you! Now I can fix the lock behinds it

Lmao right about meow! Lol my dog Daryl and I are watching going gonna turn one of these into a wetsuit heater soon I hope!

Why does mines stop ?

Has anyone had problems with the thermostat piece falling off the cap

Is that able to get two 110 legs to hardwire an air compressor?

Mine is smoking, going to trash it.

Hello are you still active? I have so much question about this setup because this is exactly what we are working on our undergraduate. Thesis. Thank you. I hope I can reach and talk to you about this

Liza Burgs

That was not the correct way to grease those bearings my friend good video otherwise

I had one of these too and did all the experimenting I could too.

Got it out but can't get it back in!

Why would you cut that

Only if I had a lathe machine, tremendous effort brother. Gift this one to me XD.

I have a hitch like your old one and hate how it moves up and down. What do they call that kind of coupler?

What are you using to power it? How many milliamps input? I'm trying to use a 9-volt battery to power one of these things bet it gets really hot and the sound seems very unstable

I have a ww2 portable generator 110v need info on fuel intake to cylinder head

Great video. Thank you

Too much talking....least demo !!!...boring and lousy !!!

Your process is very similar to rim and face motor to pump alignment. 1st vertical angular. 2nd vertical parallel. 3rd horizontal angular. 4th horizontal parallel.

You should have sent that back . that looks like it's been dropped And I read from the transformer I just purchased that they said if it has any damage don't use it.

I'm looking for this, where did you buy it?

😾 This video was no help at all !

What ampere for this transpormer

Hello, do You fix fan speed?

Thank you for showing me this

I can do all of it but the welding. Genuine artiste IMO

Hi. My father was an authorisied agent for Redil-ine for many years, both selling and repairing. He has now passed away and I have one genrator and many many spare parts (circuit boards and more). I am looking for someone who would like to purchase these for a very reasonable price.

FYI. the air vanes that power the tool are made of plastic, so it WILL fail and rather quickly. I used mine 3 times and they broke off during the third time

That key fob is actually a Mercedes design

Bruce Foster here,I have the same lathe and your video was a perfect inspiration to do the same .I have got to get that metal and make some chips.Thanks

In a 32 gallon trash can it will give you 20 gallons of hot water because the heater displaces the water.

Hello Don. I just bought a house that has these cameras installed. In full disclosure, I dont know anything about security cameras and only have basic knowledge of how to use computers for internet, word and excel. The previous owner left the switch (?) that I assume is how I will connect them to my router. Ive learned that Ill need an NVR. I think the previous owner had the cameras run to an old hard drive in the garage. Any information you can share to someone who knows nothing about how to get these up and running would be appreciated.

My parents gave me this exact 150 in one for Xmas 1976 when I was 11. I use to take it to School and me and my friend Ricky would wire up the different projects over the lunch hour. The police siren was the best one from what I remember. The TV show CHIP's was big at that time so we loved it. Ricky was so inspired by all of this he got his parents to buy him the 200 in one kit!

Nice to see you just testing thee water if you will. Just casual riding getting to know your bike and the things that your lowly learn8ng what you can and can't do on it. This far.

Nice work to begin with. You can do with forced air to help the combustion eg. from an air blower.

This video was very helpful. Glad to know it it works. I only wonder will it be stable after many hours of use??

Where did you get the metal strip from?

I watched your video and enjoyed it a lot. You sound like you know what you’re doing. With that in mind I have a question. I have an old 1940 drill press that I want to put a 1/2 hp 3 phase motor on. I bought a Transformer to step up the 110 from my garage plug in to 220. Here’s the question: is that all I need? All I have to do is plug the transformer in the wall and the 3 phase motor into the transformer. I also bought a VFD to regulate the rpm’s. Any advice will greatly be appreciated…..

Thank you so much for these great ideas. I have a 2019 grand caravan and my side doors would just randomly open. After a 300 dollar quote from the dealer I bought some cheap aftermarket’s from Amazon which did not pair with the new grand caravan. So I disassembled them. The aftermarket fob had a plastic tape covering the circuit board that force connected the circuit board to the metal connectors. So I ripped off the tape gently and reattached them on top of the circuit board of my native key. Everything works like a charm now.

Are they asure you a good visual field in traffic ???

Thank you for taking the time to post a simple get to the point easy to understand video

Thanks my 2014 Dodge Caravan Key Fob lock buttons stopped working you are correct on everything you are saying I ordered another fob I think the switch cover most likely will solve the problem using the new one

It's all about the dollar. I bought an 2011 grand Cherokee from Port Jeff jeep with a stock radio. I picked up a touch screen radio (plug n Play) And made the mistake of buying the wiring kit from that dealer. Plugged everything in radio didn't work. Then I went back to jeep and the service guy told me the radio has to be programed to the computer. That's BS. And he says it will be 160$ and no guarantee. OH SO IT'S A SCAM? I went against my better judgment and let him do it. Just as I suspected, didn't work. So I went back to the guy who sold me the radio and told him I want to try his wiring harness from his radio. And sure enough it worked. I went back to jeep and with a room full of customers I told the manager you guys took me for 160$ when you sold me a bad wiring harness and you knew programming the thing wasn't going to work. That was the last time I ever went back to that SHITHOLE. Auto dealers ate the biggest thieves EVER!

i love you

Used a long, 3/8" width zip-strip as shim & worked well enough. Thank you for the insight!