you bought the best cartridge the toaplan with the best old school shooters.
@ІгорНауменко-н4э4 күн бұрын
Sven gd 9800
@TheKonsolist3 күн бұрын
Very similar
@MellowVrr9 күн бұрын
What did you use to open it up?
@TheKonsolist9 күн бұрын
A gamebit 4.5mm
@DotCom-c2b11 күн бұрын
what did you studied to fix those kind of things, i am just curious
@TheKonsolist11 күн бұрын
It's all self taught. I always loved fixing things.
@LaIrisBlanca14 күн бұрын
tremendo!!
@davidroma268Ай бұрын
For those Who wonder of it work on a Ps5 PCB. Yes, i change even the Ps2 joystick with this tool. I bought mine 2 days ago and its wonderful, i took off the Joysticks like a pro in around 5 minutes. I save a lot of money i recomend it. It cost me $20 bucks. 😊
@MR.before-fs8hbАй бұрын
i have the same problem with my dsi too but idk anything about fixing devices
@TheKonsolistАй бұрын
I didn't know anything about fixing consoles a few years ago. I have a box full of devices I destroyed unintentionally along the way. I call it my box of shame🙄
@Charlie_B.Ай бұрын
I just wanted to say thank you for this video. I have a brass zippo that I’ve owned for decades now that I got when I was in the army many many years ago lol and the lid came off on mine like it did yours. I sent it back to zippo they repaired it and a month later it came back off so now I used your fix and it worked and it’s holding so thank you because like you said sentimental value was far more valuable than just replacing it.
@TheKonsolistАй бұрын
I'm so glad I could help you with my video!
@Gameshorts594Ай бұрын
Hi habe meine batteri gewechselt aber beim laden gibt esär nur ein oranges blinken
@TheKonsolistАй бұрын
@@Gameshorts594 Kann sein, dass die neue Batterie nicht richtig eingesetzt wurde. Vielleicht ist auch die Batterie nicht ok. Hast du ein Multimeter um die Spannung zu messen? Hatte auch schon das Problem mit "neuen" Batterien. Gekauf, und so tiefenentladen, dass sie nicht mehr zu retten waren.
@libroscombustibles2616Ай бұрын
use silicon grease on the metal rods rails and the servo screw! silicon based grease is white and has a different smell, and is specially designed for small mechanical assemblies in electronic devices. Lubricates rubber and protects surfaces from high and low temperatures, reduces friction in moving mechanisms has a higher melting point and a more efficient rate of resiliency, lasts more, it's 99.9% non conductive, collects less dust, and it will outlast any petroleum jelly 5 to 1. I have non heavy duty VCR's from 1995 that have their silicon grease as white as if it was applied the same day. it's performance certainly is miles ahead the good al Petrol jelly... which I'm by no means judging, it's a handy substitute. But if you charge to fix these kind of equipment using petroleum Jelly is inexcusable, with all the respect IMO. Great video anyway Mr consolist! Hope your channel keeps growing, I subscribed btw!
@TheKonsolistАй бұрын
I found teflon grease works better for me.
@libroscombustibles2616Ай бұрын
@@TheKonsolist Im gonna try it!
@christopherdecorte1599Ай бұрын
@TheKonsolist Did you clean the roller that pulls the disk in that would be the primary fault on your drive the old grease didn't look dry or excessively gummed up with hair dust or other foreign debris. I ran into this a few times with ps3's I bought with bad disk drives for personal collection those rollers collect lots of crap I remove them and clean with dish soap and water.
@TheKonsolistАй бұрын
@christopherdecorte1599 Yeah I did. But I used Q-Tips and windowcleaner. Have no running water in my lab 😔
@libroscombustibles2616Ай бұрын
@@christopherdecorte1599 you can take that plastic band and leave it overnight soaked in silicon grease it will restore some of it's original properties.
@ingenfestbremsАй бұрын
Still have my first gen PS3 60gb Europe /PAL version. The one with ps2 hardware, it's Mint and not much used, even back in the day's when it was new. Are these still more valuable than the later models?
@TheKonsolistАй бұрын
Yes, because of the backwards compatibility. The newer ones only play PS3 games.
@smartfox2295Ай бұрын
@@TheKonsolist The "newer" ones including the latest PS3 model the SCPH 4000 also referred to as PS3 Super Slim plays PS3 and PSone games. The backward compatibility to PSone (on PS3, PS2 consoles used hardware) titles was always achieved through pure software emulation and didn't use a hardware based solution like as it was the case for the the PS2 backward compatibility.
@gretawidmann1107Ай бұрын
Super cool bro❤❤
@TheKonsolistАй бұрын
@@gretawidmann1107 Thanks sis😋
@pierreinthavong181Ай бұрын
Nice game console repair!😁
@TheKonsolistАй бұрын
Thank you 😊
@moronigomez4251Ай бұрын
Hola podrias ayudarme porque formatie la tarjeta sd y ahora solo prende el led azul y no prende mi consola es igual que la tuya
@TheKonsolistАй бұрын
Hola, intenté copiar la tarjeta SD. Lamentablemente es de sólo lectura y no tengo acceso a los datos. Es posible que haya una copia de la tarjeta SD en línea. Lo siento, no puedo ayudar.
@miahjean7479Ай бұрын
I watched this whole thing just to realize my outlet wasn’t working. 🥲
@LouisMays-ty5dlАй бұрын
I found 2 wii in the trash one works one needs cleaning ty 4 video
@waqy2 ай бұрын
2:37 Yes just skip the hard part
@TheKonsolist2 ай бұрын
Sorry 😞
@waqy2 ай бұрын
@@TheKonsolist nah it's all good dude. Figured it out in the end 😁
@mawansuwito2 ай бұрын
Trims vidio tutorialnyo ngaB ⭐⭐⭐⭐⭐
@hakim031retrolifes2 ай бұрын
Hello, very nice solution, thanks.
@TheKonsolist2 ай бұрын
Thank you very much 😊
@shageevideo2 ай бұрын
thanks, I just can't get the rubber controller pads back on as I don't have access on the other side of the board to pull through the rubber pins. My PowerA controller is slightly different inside. Anyone know how to push them through effectively if you can't pull them though do to limited access?
@TheKonsolist2 ай бұрын
I would use my tweezers, push them till it sticks out of the other side a little bit, and then pull them through also with your tweezers.
@intel386DX2 ай бұрын
Inam using pirate controllers for that mod. Hate to destroy original for that .
@TheKonsolist2 ай бұрын
@@intel386DX Normally I do that, too. But in this case I had this controller left over from my Famicom Portable mod.
@intel386DX2 ай бұрын
@@TheKonsolist even then you could use a pirate PCB with blob :)
@TheKonsolist2 ай бұрын
I hate these glop top chips so much!
@intel386DX2 ай бұрын
@@TheKonsolist me too, they goes bad very easily, so they are the perfect candidate for this mod :)
Honestly, I don't know why I desoldered it. But I still have it. The mod will work perfectly fine without removing the modulator.
@intel386DX2 ай бұрын
@@TheKonsolist I love these situations that you just have to solder one conductor to the point , and not remove the modulator ot even add a transistor 😄😁
@intel386DX2 ай бұрын
Fanatic mod. You can mod full chip set clones as well . Thankfully 6 switch, and Jr. models already have CD4050 on the board . I am curious why they removed it from a 4 switch revisions.
@ligthseeker48102 ай бұрын
I did the same thing to mine, it works for short time.. but it return sometimes
@jasonschopke23972 ай бұрын
Hi hab das Problem mit einem DSi XL dass er kurz leuchtet beim einstecken des Kabels aber dann erlischt das Licht wieder. Eine Idee was das sein könnte?
@TheKonsolist2 ай бұрын
Hi. Hast du schon eine neue Batterie probiert?
@JM-cv5ic2 ай бұрын
I think there are 2 models, one with a 12-hour format and another with a 24-hour format.
@TheKonsolist2 ай бұрын
I think so. This one is a 12 hour model.
@yticalz2 ай бұрын
do you ever fix things for people?
@TheKonsolist2 ай бұрын
no I don't. sorry.
@Swift_Water2 ай бұрын
What’s the name and size of the screw driver for the security screws on the top? Tri-wing?
@TheKonsolist2 ай бұрын
Triwing Y0
@nero8732 ай бұрын
@@TheKonsolist what size was it cause I only find one with 2mm
@TheKonsolist2 ай бұрын
I just checked. The 2mm is the right one 👍
@nero8732 ай бұрын
@@TheKonsolist Thanks
@josmancilla9582 ай бұрын
Oh god, you saved me. Thank you very much :')
@TheKonsolist2 ай бұрын
@@josmancilla958 Glad, I could help.
@AdrianAndreiRobert2 ай бұрын
Did you solve it?
@TheKonsolist2 ай бұрын
@@AdrianAndreiRobert Sadly, no.
@selvaganapathya96242 ай бұрын
Can i replace any transformer or model number transformer only can i replace?
@TheKonsolist2 ай бұрын
I just searched for this exact model number, so I don't know if another transformer would work, too.
@selvaganapathya96242 ай бұрын
Oh thanks for your fast reply.
@TheKonsolist2 ай бұрын
@selvaganapathya9624 You're very welcome.
@xabitheng46192 ай бұрын
I have the exact same problem with a DSi XL. I bought it with that problem and when I opened it up I saw the wather mark was pink, it also was a bit dirty and a rusty. I cleaned it and then I tried to fix it with a working top screen but nothing. I figured out it's a problem with the mainboard since I tried putting the mainboard in another DSi XL and the problem persisted. Perhaps one of the micro components is damege and hinders continuity to camera or top screen slot socket. Camera and top screen slot sockets seemed to be good to the naked eye. I've no idea what to do, I guess we can just buy a working mainboard from AliExpress but but It doesn't make a lot of sense since it's kinda expensive and risky.
@winny68923 ай бұрын
Warum in Englisch.
@TheKonsolist3 ай бұрын
Weil ich damit ein viel größeres Publikum erreiche und es mir Spaß macht mein Englisch zu verbessern.
@winny68923 ай бұрын
@@TheKonsolist Na ja, mich haste nicht erreicht, da gibt es englische KZbinr wie Sand am Meer, die wirklich professionell sind und von denen man echt was lernen kann, ja dann viel Spaß bei deinen Englischvideos.
@wobbuffet23433 ай бұрын
This might work for a dualsense? I changed my joysticks a while ago but it was difficult to the point i need to break the joysticks in order to desolder it. This look promising if i need to change or upgrade for a hall effect
@tkdgamerdavid3 ай бұрын
My console was working well I don't know what happen, I was traveling and when I came back tried to play and there was this black screen. I replaced first Bluetooth module, nothing happened. Then wifi module... Same nothing, then both at the same time... Nothing hahahah I don't really know what could be damaged the board looks pretty clean, no rusty parts. Even I cleaned with isopropilic alcohol but yeah nothing changed. Do you hate too the crazy amount of screws that Nintendo wii has? Good video mate I'm subscribing right now! 🫡 Some videos in my channel has subtitles available in English hope you find one that you like. 🙌🏻 1up🍄
@austen997313 күн бұрын
Same issue I bought a bulk lot of junk wiis black screen replaced the chip and still black
@tkdgamerdavid13 күн бұрын
@austen9973 that's really disappointing hahaha I still don't know what happened to that wii but well it's better just to get another one but I feel so lazy about installing all the apps and games specially the wii games on wbfs format ... I wanna die lol. 👉🏻🤯💨
@mertalicann3 ай бұрын
Same thing exactly happened to me and sold my dsi XL and the New lcd is still listing on ebay. I've never soldered anything before trying
@pierreinthavong1813 ай бұрын
Cool repair video!😊
@TheKonsolist3 ай бұрын
Thank you!
@retropol43163 ай бұрын
Thx nice repair.
@TheKonsolist3 ай бұрын
Thanks.
@TheKonsolist3 ай бұрын
Please watch my previous video for more details! kzbin.info/www/bejne/hH2rpGqqbtmYqcU
@fw35063 ай бұрын
This tutorial was what I needed. I've seen lots of videos showing how to tear down the whole assembly, but I only wanted to see how to access the disc drive for cleaning with minimal amount of effort.
@TheKonsolist3 ай бұрын
I'm glad my video was helpful
@danielblue36425 күн бұрын
Not sure how minimal that was!!!
@SLRModShop3 ай бұрын
It turned off immediately, my first thought was it was shorted somewhere and a safety kicked in but then it accepted a disc. What a strange thing not to at least display an error code on the screen as there doesn't seem to be a reason not too. No idea how long it would have taken me to figure that one out... Way longer than you, that's for sure.
@gretawidmann11073 ай бұрын
Muitos aplausos, meu querido irmão❤
@TheKonsolist3 ай бұрын
Muito obrigado, querida irmã!
@GadgetUK1643 ай бұрын
Nice fix =D
@TheKonsolist3 ай бұрын
Thanks. I still can't believe that a bad bluetooth module would bring the whole system down.
@GadgetUK1643 ай бұрын
@@TheKonsolist May be a shorted cap on the module affecting a power rail?
@TheKonsolist3 ай бұрын
@@GadgetUK164 I will check that, when I get the new module I ordered. definitely worth a follow up video.
@pierreinthavong1813 ай бұрын
Cool nintendo wii console fix!😊
@TheKonsolist3 ай бұрын
Thank you very much 😊
@cookiehero45183 ай бұрын
Great video
@TheKonsolist3 ай бұрын
Thanks so much!
@anastasiarozhkova86893 ай бұрын
Nice fix!
@TheKonsolist3 ай бұрын
Thanks 😊
@GameOver-dl2ot3 ай бұрын
Do you think that we can change the memory ?
@TheKonsolist3 ай бұрын
I don't know. But in my experience with these cheap handhelds probably not.
@GameOver-dl2ot3 ай бұрын
@@TheKonsolist ok
@gretawidmann11073 ай бұрын
Bussilein lieber Bruder❤ cooles Video 😊 Grüße aus Portugal 🇵🇹