the killer instingt has a crank too you buy it extra

Killer instinct also makes a crank to cock the crossbow

The reason why i said that you cross tread it going in the bolts or etc . Just be careful about it ! The tools that they sent to you is better to use than a drill !

I already see that you made a mistake here is that you dont use a drill to tight up the bolts on the crossbow ! You uses what they sent to you in box !

First get rid of the Way Too Loud Hill Billy Music. Next do your prep work before you record. I won't be back to your site unless I have an overpowering urge to waste a lot of time.

I just found your channel and I love it! But I noticed you haven’t posted in over a year. Have you quit KZbin? I sure hope not!

I just bought the Patriot 425 at walmart for $184.00 and the crank was a big deal for me too . About 2 years ago the VA did upper back surgery on me for my solder pain . Now I can do 95% of what I could 20 years ago , But gambling on messing it up trying to pull 200 pounds wouldn't be smart . It was that price on clearance markdown . I just got home with it haven't even put it together yet . I would like to see some video of people shooting it after sighting in . Great video .

I had one the metal poles that was so thin the wind bent the poles and broke them

Hey, did your camera break or did Mama say the you’re done making videos? Miss your vids!

Thanks for the video! I was looking at the Dagger 405 myself but I seen this and thought I would check it out. I would swap out the scopes if it were me.

How did it hold up through the winter?

Axle to axle is the word not spread.

You are missing the table leveling brackets on your saw. Before I knew what they were , I used washers under my table to level it lol.....

Also, not sure if this is your exact model (113.1977.51), but here is a link to that manual. The table leveling instructions should be the same. www.searspartsdirect.com/manual/62n39m27pb-000247/craftsman-113197751-radial-arm-saw-parts

we need a back side reinforcement ... its loose in the back

I bought what appears to be the identical saw from Sears in the early 1970s, but I put the caster kit on the stand from the get go. It matters not if the stand is not quite level as long as the "arm" is paralell to the table and the blade is true to that. Many basement and garage floors will have a slight pitch to facilitate water run off. I really should put a new table on mine but at 74 I'm not doing much heavy work.

I would suggest you check out how to set up a radial arm saw properly. This isn't the way. You only make the arm parallel to the table. The floor has nothing to do with it. I thought he was joking.

Good luck with that center point I replaced 2 sets of limbs last year on 2 crossbows that are center points. Good warranty, the best warranty in the crossbow world. That's what I'm saying, nice about them.

Where’s the next video

Sir. Nice comparison. I just bought a patriot 425 as a back up To my killer instinct Ripper 425. Ive had 4 limbs crack on the ripper cocked in the woods. Ruined 4 hunts. killer instinct has been good on their warranty claims and have replaced the limbs. But it takes 8-10 to receive them. I did not find a warranty card in the center point box. I'm hoping the back their product like KI. Being older myself I really enjoy my return to hunting. The wife was kind enough to come help drag deer out of the woods the last few years. Stay strong, be safe out there.

The only thing your comparing isn't the bows.. it's your back. That's no reason to compare bows.

Does the centerpoint have a picatinny rail on the bottom of the rail like their other models?

Hows the patriot holding up?

what is mama's baby?

Would you buy this one again I was about to buy one on sale for 260 but I’m not sure yet would you b recommend it at that price point are should I keep looking

I have a Center point cross bow call Patriot 425 and a BearX Saga 405 crossbow !! They both have cranking device on them !! Good video !! God Bless !!!! 👍👍🙂👍👍

My understanding that they make cranking device for all killer Instinct crossbow !!! I do believe they do have that for that crossbow !! 👍👍👍👍

It's sold in other countries as the Mankung XB58 kraken. Doesn't come with Centerpoints warranty or customer service though. Just a heads up for if spare parts ever become scarce. Mankung generally have basic features but good overall build quality.

I just bought a Patriot 425 center point cross bow have not shot it ! Because of a wet weather in Mississippi ! Soon as it quiet raining and dry up !! I am going to sight it in !! I bought it at a good price !! I can not wait to sight it in !!

I got a dead silent crank for my fierce 405

I got one my self ! I love it !!!

Not sure about the math. It was 34 degrees and an hour later it's 44 degrees. Not sure where you get 6 degree rise?

Nice bow! I have a Ten Point Wicked Ridge. I love it!

Picked up the CP Patriot 425 at Walmart, and I couldn't be happier ..Amazing kinetic energy

What about the plastic bag does it need to be removed lol

For The Heater To Work At Its Most Effeciant? You Have To (LEAVE IT ON UNTIL EVERYTHING IN THE GIVEN AREA HEATS UP TO THE TEMPERATURE YOU WANT TO KEEP THE ROOM AT.) 😲😲😲😲Yep.. Then The Thermastadt Will Kick In And Shut On Or Off As Need Be.. 🤨🤨🤨🤨😲😲😲😲Yep.. You Have To Understand, That Everything In The Room Is At The Same Temperature.. To Include The Metal And Wood Items.. So, When You Turn On The Heater? You Have To Heats ALL THOSE ITEMS To The Desided Temperature You Want (FOR THE SPACE.) Otherwise? You're Wasting Energy And Fuel To REHEAT Every Item ALL OVER AGAIN.. 😮😮😯😯However? Once Everything Is Heated To The Desired Space Temperature? The Radiant Heat From Those Items Will Also Help To Keep The Space Heated.. And? The Thermastadt, Will Turn Off The Heater, Until The Temperature Falls Below A Certain Level. Because If You Turn The Heater Off? YOU COOL DOWN EVERYTHING.. 😮😮😯😯😲😲 Yep. And, IT WILL TAKE A LOT MORE FUEL THAN NEED BE, To Heat The Space Again.. 😮😮☹☹😲😲 You See. HEATING? Works THE EXACT OPPOSIT WAY COOLING WORKS. Meaning? If You Keep Putting Boiling Water Into A Refridgerator? The Regridgerator Will NEVER GET COLD ENOUGH TO COOL THE WATER.. 🤔🤔🤨🤨🤨🤨😲😲😲😲 Yep.. That's Why We Keep Refridgerator Doors CLOSED. So They Have Enough Time To Cool, Or Freeze The Items Inside Them. 🤨🤨😠😠😶😶😲😲Otherwise? Most Of Our Electric Bill? Will Be Used To Cool Spaces We Don't Need Cooled.. 🤨🤨😲😲😆😆😂😂And, The Refridgerator? WOULD NEVER SHUT OFF.. 🤔🤔😶😶😲😲😆😆😂😂 Which Is No Difference, Than Your {Mr Heater}, And Its Thermothadt.. 😶😶😲😲Got It? Cool.. 🤗🤗🙂🙂😎😎😎😎

Good video but the music is trash can just hear you talk stop adding music my god.

Try the Excalibur G340 you won't find it at Walmart but it's a great bow.. It's simple and powerful..

Damn it ted, you didn't show the rest, you didn't shoot the bow and release the tension you just put on it so that we could see how it functions. Outside of that you did a great job nice video thank you very much. Peace

Keep the string waxed!! Also, keep a replacement string on hand! After a year or two they tend to weaken and break!! I had two actually snap as I pulled the trigger! They make a wax for the strings I believe it's called "string snot" or similar and it's really good! Also, recheck the bolts for tightening after every use as they like to back out or do what I did and add a Drop of glue before tightening! GOD Bless.

Having the arm "level" is one thing - but it is much MORE important that the arm be Parallell to the table.

Stedhomer, Kevin here. If you would like to know my electrical concerns about your install, let me know. You did not show a lot of the electrical connecting specifics, but I do have a few concerns. Best wishes, Kevin

My dad and I each have the same one. Took us just over one hour for each building. A few tips, we used a light weight pipe to slide in the seam of the front door, fit perfectly. And when we built the frame we started down the top center section from the back and self taped screwed each connection, then when started building off that working our was downward front to back each height sections and it lifted by each section we added. We used the two ropes to throw over the top and pulled the roof up over. But before we touched the roof, back and door we added out ratchet straps so we wouldn't loose the strap up the seem. No need to cut the hole for the strap, it comes around the front and leg should be barely exposed under front panel and hooks there. I'll try and post photos. We also placed dirt all around our walls to keep the wind out. We get over 150" of snow here and it holds up just as long as you clean it off after each storm Here's mine. kzbin.info/www/bejne/nGHKgIl4jbJ2fdU

I live in Central FL and my Harbor Freight CoverPro shed just survived Hurricane Ian. Trees down all around it, and it is PRISTINE! Hard to believe.

Not working right

I know an incredibly handsome fitness model type that built one very similar to this.

Looks good...I found bc truck through your channel a few years back when you won one of his drawings

Send them to me 😃😉(4x4's)

Looks great and she fit right in there

Looks good