A great help ,thanks mate .saved me a few quid 👍👏👏
@user-wl3nq3lu8n8 ай бұрын
do your guys opti mysts also make a lot of dripping water noise from the transductor spitting it out?
@Cruella-Deville Жыл бұрын
Thank you it’s useless otherwise
@pauldiggin392 Жыл бұрын
Many thanks, cleaned the glass disc and now working perfectly
@mamazwai2010 Жыл бұрын
Thank you for the video not had time to order a part Mrs been on at me for 2 years now, to sort it, used vinegar for 2 hours put it back together and hey presto it works like it used to also ordered a part so wont need that then Thank you. :-)
@Markybug-Keira-Cody Жыл бұрын
Ok update ! Mine stopped working again after cleaning the transducer disc. I bought a complete replacement transducer off eBay but it wouldn’t work either. Thought I would now need to replace the fan , BUT reading online someone recommended unplugging the cable from the back of the fire to reset the electrics ? with there being a new transducer. Switched back on and working perfectly! So worth bearing in mind.
@Markybug-Keira-Cody Жыл бұрын
Hey , thanks for this video ! Cleaned the disc as you recommended and it’s work perfectly! I didn’t have white vinegar so just used malt vinegar, and only did 2 hours. Great helpful video !
@wriga007 Жыл бұрын
Thanks for the video, just bought the Gosford and this info will really help 👍
@caroltunney27092 жыл бұрын
Thank you for this helpful video. I followed your instructions exactly and now my fire is working again. I didn’t need to buy anything
@andrewboyle90572 жыл бұрын
brilliant, thanks.
@simonnewcombe41022 жыл бұрын
I have the mist effect working but there is no mist coming out from the fire. It seems to be getting trapped beneath the plastic and not rising. I have replaced all the parts and cleaned thoroughly with no success. Can anyone help?
@natc49412 жыл бұрын
Thank you for the excellent advice. Much appreciated
@maxineabberley54742 жыл бұрын
Hi. I have got an Oakhurst and got replacement transducers off amazon/e-bay and it all worked fine.. however now the mist isnt coming out when the cover goes back on.. it is making mist so transducer is ok.. but its not coming out when cover is on. could this mean the fan has stopped working so isn't blowing the mist out? Any Tucson how to change the fan please?? And where to get one from?
@dennisbarnes62182 жыл бұрын
Many thanks very helpful.
@lindabruce31672 жыл бұрын
Can you replace the fan
@bobcarrick60322 жыл бұрын
have you ever replaced a fan?
@gavinowen49182 жыл бұрын
Thanks for making this video. Soaked the disc in white vinegar overnight, flame effect fully restored in time for Christmas gatherings.
@lizziewebb292 жыл бұрын
Keep returning to the only informative video on here about fans and Optimyst workings. Thank you.
@Mena-gt6xc2 жыл бұрын
Hi, thank you for this helpful tip, i'll do this next time it starts playing up. Could you tell me how to change the fan? I have the part for it and have looked inside but it doesnt look easy to change so im wondering if i need to go in from the underneath? Your video was the only one on youtube i was able to find on fixing these fires. I have a dimplex grande. Thank you.
@derekpinder84202 жыл бұрын
Tried the vinegar trick on the transducer disc and it works.thanks for the tip.
@Ben-gd5rz2 жыл бұрын
Thanks for this😊😊 Just fixed ours👍👍👍
@sjwilliams67212 жыл бұрын
Thanks so much for this. Steam feature hadn't been working for ages. Taken it all apart, cleaned it all out, etc etc, still nothing. Saw your video, and took out the transducer. Couldn't get the disc out though, even with the aid of a knife. However, I just poured vinegar onto the top of the disc while it was still in the transducer. I left it for 10 minutes, dried it all, put the mechanisms all back together, and voila. Lovely steam coming out. Thanks so much. Very grateful.
@shiggins13242 жыл бұрын
Is water from a dehumidifier deionised? Deionised water messes with the level detection (apparently)
@vediahassan75823 жыл бұрын
Thankyou!! I'm going to try this its not been working for months my dimplex optimyst
@Molly9563 жыл бұрын
This definitely works. I bought a new one before I saw this unfortunately & now still using the old one
@ginalewis31343 жыл бұрын
Thanks so much. Very informative and helpful. This did the trick for me. We use water from the tap, but it’s from a water softener. We’ve had the fire for over 3 years so it’s not bad going that the disc needed a good clean after that time.
@tomhickson83133 жыл бұрын
Well done tommy lad save me a bit of money with thee old vinegar trick 👍👍👍👍👍👍 ps any tips on outdoor security lights my LED ONE IS VERY DIM only had it just over 12 months 🤔🤔🤔
@pideciday16133 жыл бұрын
Hello, how many watts are used bulbs
@jeanmorton4053 жыл бұрын
Helpful. Tried vinegar, no joy. Purchased replacement disc. Still nothing. Can hear click and fan working. 4 lights working also cleaned filter unit. There are some bubbles coming from transducer but nothing like yours and certainly no mist. Anything else it could be please? Cheers
@robertjames33863 жыл бұрын
Superb - fixed the problem for me. Thanks a lot
@kevinhicks59443 жыл бұрын
Been scratching my head for a few weeks trying to sort the flame on my fire. Saw this video and soaked the transducer disc in vinegar as instructed and it’s working like new. Great advice, thanks.
@SaxJockey2 жыл бұрын
Did the disc appear contaminated (with limescale etc)? I use filtered water, the disc look clean, but I still removed it and cleaned it with white vinegar (didn't soak it for hours). Still U/S, lamps and fan comes on but nothing from the transducer, after a few minutes it all shuts down. Going to check for voltage at the transducer socket; after that's it may need a new transducer. The logic of these fires is not the best, one should be able to have just the lamps on for effect or have the heater on; if the mist is not working the whole thing shuts down.
@kevinhicks59442 жыл бұрын
@@SaxJockey No the disc did not appear contaminated. I used ordinary malt vinegar and soaked the disc for 4 hours.
@SaxJockey2 жыл бұрын
@@kevinhicks5944 Thanks for the reply. It's working again now 👍.
@kevinhicks59442 жыл бұрын
@@SaxJockey That’s great 👍
@steamboatwillie85173 жыл бұрын
Aside. When the ' smog' blower packs up. Instead of buying a fifty quid one, look on eBay under 3D printer blower, cooler fan. You'll find the same for about £3! Shove a resistor in line to drop it down some, and away you go.
@garycreativemusic52713 жыл бұрын
This was really helpful thanks .
@Abbo_HG3 жыл бұрын
What type of vinegar? Sorry I'm 15 and trying to fix my mums electric fire. 🤪
@Shaun.Stephens3 жыл бұрын
White vinegar. Good luck (if I'm not too late).
@MattAlexan3 жыл бұрын
I’m trying to discover whether the ‘optimyst’ fire essentially needs hot halogen lamps or if these can be changed for LEDs??
@guyswinscoe48953 жыл бұрын
I tried LEDs. They don't work. You need the halogen heat.
@MattAlexan3 жыл бұрын
@@guyswinscoe4895 thank you!....I realise that now!
@davidashworth60333 жыл бұрын
I’ve been using LEDs for 2 years now and no problem. The amount of vapour produced is reduced but it does work.
@MattAlexan3 жыл бұрын
@@davidashworth6033 Good to know that. Thank you!
@RichSimpson Жыл бұрын
I went for a combo of led and original halogen. The 4 halogens just look a bit too bright and orange. I have two original plus 2 red LED (middle ones) the colour is better, and it uses less power but still hot enough to make the steam rise (not sure the light makes much difference to the steam/smoke effect to be honest). Great video, very helpful
@nickhildom3 жыл бұрын
Thank you
@4DR14NCR41G4 жыл бұрын
I’m so pleased I found this video and thank you for making, have the Chesney’s Opti-Myst which is just a rebranded Duplex, turned it on today and nothing, opened up the fan which is spinning (don’t know if it should be spinning faster but is spinning) but the transducer isn’t creating hardly any mist, certainly not the amount I saw in your video, will try your vinegar trick, truth be told it’s only been used once in a year since new, would you say it’s the transducer I need to replace? Thank you so much for your time and for creating this video, would have been at a loss without it 👍🏼