Пікірлер
@danilogorlani8960
@danilogorlani8960 Ай бұрын
Amazing frame e bike. Is possibile to build it with grx 2x? Thanks
@veloheld
@veloheld Ай бұрын
Yes, have a look here: www.veloheld.de/produkt/veloheld-iconx-titan-komplettrad-2/ You can choose between 1x or 2x GRX groupsets.
@YenchingTsai
@YenchingTsai Ай бұрын
The new GRX made it easier installing on a steel frame. I built a RX815 recently and the electric wire management did bother me a while.
@dadogglover9120
@dadogglover9120 Ай бұрын
Cool
@ryn5302
@ryn5302 2 ай бұрын
Why the tapered headtube? :(
@veloheld
@veloheld 2 ай бұрын
Because of minimal integration of the tapered Carbon Fork in steel👍
@lukasmuhle9583
@lukasmuhle9583 3 ай бұрын
Location: Königshainer Berge maps.app.goo.gl/Sbv1D7iD6KwhbUbCA?g_st=com.google.maps.preview.copy
@noelclaremont
@noelclaremont 4 ай бұрын
Steel is real 🎉
@louis8913
@louis8913 8 ай бұрын
Moin Veloheld Team!✌🏼 Wie schwierig/aufwändig ist es, bei einem IconX nachträglich Kabel für Front- und (besonders) Rückleuchte zu verlegen? Spiele mit dem Gedanken mir das IconX (mit Stahlgabel und GRX 1x12) zu holen und würde in ein paar Monaten/Jahren gerne autarke Dynamo-Beleuchtung für eine lange Radreise nachrüsten. Ist das einfach so möglich oder muss ich dafür die ganzen Schalt/Bremszüge erst „aus dem Weg räumen“?
@veloheld
@veloheld 8 ай бұрын
Hello… das kommt ein wenig darauf an, wie sehr du die Leitungen "verstecken" willst. Am "saubersten" wird es natürlich innen im Rahmen und Gabel zu verlegen. D.h. das ist ein wenig aufwendig, aber machbar die Kabel da durch den Rahmen bzw. Gabel zu bekommen. Hinten müsstest du dann mal schauen, wo die Rückleuchte angebracht werden soll. Schau gern mal in unserer Galerie auf der Website, da siehst einige Räder mit Beleuchtung und kannst sicher auch die Verlegung sehen. Gern kannst Du uns auch mal direkt kontaktieren und wir helfen dir, zur gewünschten Beleuchtung.
@CarstenFriedrichBandt
@CarstenFriedrichBandt 10 ай бұрын
Hallo zusammen, Ist die das die Farben "Bianchi celeste grün"? Sie ist ist zeitlos chic ;-)
@veloheld
@veloheld 10 ай бұрын
So ähnlich. Ist eigentlich eine Farbe eines bekannten deutschen Automobilbauers.
@CarstenFriedrichBandt
@CarstenFriedrichBandt 10 ай бұрын
@@veloheld Aha. In "Bianchi celeste grün" und mit Campas. Ekar wäre es perfekt ;-) Verbaut ihr bei den Gravel-Rädern auch Columbus-Rohr? Und wo werden die Rahmen gebaut?
@veloheld
@veloheld 10 ай бұрын
@@CarstenFriedrichBandt Ja, das Rad gibt es auch mit Campa, da wir alles individualisieren können. Hier wurde das Rad aber extra für die Einführung der neuen GRX 1x12 fach gebaut. Und momentan werden die Rahmen noch in Taiwan gebaut. Aber wir sind gerade dabei unseren lokalen Rahmenbau auszubauen, so dass es womöglich auch bald dieses Rad mit Columbus Rohren "Made in Germany" geben wird. Viele Grüße und schöne Weihnachten!
@mikehoward1738
@mikehoward1738 11 ай бұрын
tubes in tire, awesome
@feilerocket2772
@feilerocket2772 11 ай бұрын
Sehr schöner Aufbau. Das einzige Aua ist der verwendete "Adapter" des Konusaufschlägers. Aber TOP Rad und darauf kommts an.
@jojoanggono3229
@jojoanggono3229 11 ай бұрын
Excellent that you re-thread and faced the BB bracket. I had much problem with premature BB wear because my steel frame was not re-threaded when first assembling.
@sebastiankaminski6768
@sebastiankaminski6768 11 ай бұрын
Piekny rower
@dirkkindermann2734
@dirkkindermann2734 11 ай бұрын
Ein schöner Film, und schön zu sehen, wie alle Komponenten ein passgenaues Ganzes ergeben. Habe mich sehr über die kleinen Details wie Lagersitze planen, Bremsleitung anschließen und Griffe ausrichten gefreut. Jeder der selbst mal ein Bike aufgebaut hat weiß, dass hier die fummelige Arbeit drin steckt ;-) Sogar die Farbe der Montageschmiere passt zum Bike :-P
@johnnysaudade773
@johnnysaudade773 11 ай бұрын
Incredibly well shot and meticulously well assembled bicycle by a technician that clearly understands the devil is in the details. I'm a shop veteran with decades of experience and I find it so hard to watch assembly videos without being unreasonably critical, this was beautiful to watch, I wish more creators/builders would pay this much attention to best practice. Two very very tiny critiques; Torque wrench accuracy is slightly dependent on the position of your hand. For me personally it always manifests on the smaller wrenches. Shimano has new guidance on chain length calculations that are not very different, just more specific, than your/our old method. News to me as of a couple days ago, color me unaware.
@tobimotion
@tobimotion 11 ай бұрын
Ab wann gibt es alle Infos zum neuen Iron auf der Webseite?
@solodoppie
@solodoppie Жыл бұрын
Grande Antonio! BAIT
@fernandootero8038
@fernandootero8038 Жыл бұрын
Excelente amigo. 👌
@nellsen77
@nellsen77 Жыл бұрын
Das Lastenrad sieht echt interessant aus. Kommt das so von Euch? Und warum hab ich das Gefühl dass schonmal so ähnlich vor Jahren gesehen zu haben?
@veloheld
@veloheld Жыл бұрын
Das Konzept kommt von Sven Bastiaen Schulz und wir dürfen es weiterführen und verbessern. Aus der Zusammenarbeit heißt das Modell natürlich auch Bastiaen, wie früher. Es ist aber leider noch nicht ganz fertig, aber dann werden wir noch mal genauer dazu berichten…
@nellsen77
@nellsen77 Жыл бұрын
Danke für die schnelle Antwort, ich freu mich auf die Dinge die da kommen.
@peterfrancisjohnson5435
@peterfrancisjohnson5435 Жыл бұрын
A thing of Beauty🎉❤
@cristianmartinezfarran4335
@cristianmartinezfarran4335 Жыл бұрын
Beautiful,nice,respecto..👍
@veloheld
@veloheld Жыл бұрын
Thank you! Cheers!
@DorinNicolae
@DorinNicolae Жыл бұрын
Beautiful!!! I have the GRX 1x10-45.Wish I can go a bit lower gear set up for bikepacking mountain trips and changing my front 40T to lower…maybe 38 or 36…Any suggestiins will be high appreciated. Thank you🙏
@veloheld
@veloheld Жыл бұрын
You can do it! There are suppliers who offer smaller chainrings.
@robsiek35
@robsiek35 Жыл бұрын
Respect👍 🇵🇱🤙
@ttalonso
@ttalonso Жыл бұрын
waiting for a GRX 12.... di2
@playmoreguitar5393
@playmoreguitar5393 Жыл бұрын
1. THIS DOES NOT SHIP TO YOUR DESTINATION COUNTRY... 2. OUT OF STOCK... that's the Shimano way.
@veloheld
@veloheld Жыл бұрын
Where do you live?
@stevekelly6544
@stevekelly6544 Жыл бұрын
Surprised you didn’t go tubeless….
@veloheld
@veloheld Жыл бұрын
It’s not a customers bike and so it is much easier when the bike is in the showroom…
@Cous1nJack
@Cous1nJack 11 ай бұрын
Tubeless isn’t all that. My gravel is but it’s out 5 days a week. My mtb is tubes because it sits for weeks at a time. The tools in a ride are the same either way.
@stevekelly6544
@stevekelly6544 11 ай бұрын
@@Cous1nJack I have had countless flats with tubes over the years. I’ve had one flat in 3 years tubeless, and that was a freak giant puncture from a sharp rock mountain biking. Never have flatted on my gravel bikes or commuter bikes since going tubeless. Used to get pinch flat’s frequently trying to run a little lower pressures- to me tubeless is all that.
@TheMaestro169
@TheMaestro169 Жыл бұрын
Toller Aufbau! Welche Farbe ist das genau? (RAL?)
@veloheld
@veloheld Жыл бұрын
Es ist keine RAL Farbe. Ist ein spezieller Nasslack 🤘
@JF-Bikemania
@JF-Bikemania Жыл бұрын
Kein icon.x Ti😢
@veloheld
@veloheld Жыл бұрын
Nein, die Rahmen fertigen wir (noch) nicht selber. Das macht noch ein externer Rahmenbauer…
@mountainbikingfortherestofus
@mountainbikingfortherestofus Жыл бұрын
Bike builders and videographers. A really impressive piece of work in both departments. Nicely done.
@veloheld
@veloheld Жыл бұрын
They are!
@federicofernandez3012
@federicofernandez3012 Жыл бұрын
Muy buen trabajo y preciosa bicicleta Pero lo q más me gusta es tu camisa yo quiero una 😂😂
@wissel3173
@wissel3173 Жыл бұрын
Wunderbar. Einfach und wunderschönes Rad🎉
@veloheld
@veloheld Жыл бұрын
Danke für das Lob!
@Thzinou
@Thzinou Жыл бұрын
Très beau vélo 😊
@veloheld
@veloheld Жыл бұрын
Merci 😁
@yukiokobori1
@yukiokobori1 Жыл бұрын
Facingしなければ使えないFRAMEなんだろうか。カチカチトルクレンチの使い方も知らないみたいだけど。
@veloheld
@veloheld Жыл бұрын
Be sure he knows it…
@yukiokobori1
@yukiokobori1 Жыл бұрын
@@veloheld sorry I wont to say.Only one click would made exactly torque. I never click twice or more. It would be over torque.
@sandros.6665
@sandros.6665 Жыл бұрын
Tolles Video und Superschönes Bike-dank der Musik geradezu meditativ beim Aufbau zuzuschauen 😊
@veloheld
@veloheld Жыл бұрын
Sehr gerne 😊
@masonhancock5350
@masonhancock5350 Жыл бұрын
Bikes are as stupid as the music now.
@benjiepale1776
@benjiepale1776 Жыл бұрын
Hey man... i love it. How much is for that frameset if you dont mind? Coz,im thinking of building an all rounder steel. Thanks.
@benjiepale1776
@benjiepale1776 Жыл бұрын
Nevermind. I already saw your website. 😂
@shibby_ronson
@shibby_ronson Жыл бұрын
NSFW Content.
@kubackjeee
@kubackjeee Жыл бұрын
Wasn't dreambuild a thing for top tier cool looking bikes? Not something like this 😅
@gattocat3729
@gattocat3729 Жыл бұрын
I guess it depends on whose bike it is. Still a great build in my opinion
@ShimanoGermany
@ShimanoGermany Жыл бұрын
😍
@twgq
@twgq Жыл бұрын
Schon ganz cool aber in ein paar Details hätte ich es anders gemacht: - Gabelschaft ist arg gekürzt, Expander wird mit montierten Vorbau reingeprügelt und dann die obere Schraube vom Vorbau zu erst auf Drehmoment gezogen. Oo - Die Zughüllen werden mit einer einfachen Zange geschnitten. Besser wäre eine Zange für Hüllen zu verwenden, gerade bei so empfindlichen 12fach Zugverhältnissen. - Drehmoment wird gerne mehrfach nachgezogen, gerade beim Tretlager noch mal ordentlich nachdem der Schlüssel ausgelöst hat. Das sollte man nun wirklich nicht machen, das Drehmoment ist damit überzogen. Mag bei 40nm nicht so wild sein, aber am Vorbau zieht der Kollege die Schraube nach dem Auslösen ebenfalls nach! (Achtung, es sehen sich Leute die Videos an und machen es vielleicht euch nach.) - Es ist einfacher zu erst die Hydraulik Leitung im STI zu verschrauben und dann die STI auszurichten. Die steife Hydraulikleitung kann sonst manchmal schwer bis zum Ende eingeführt werden, wird dann falsch montiert und damit undicht sein.
@ohshititseddie
@ohshititseddie Жыл бұрын
Gerade der Expander - Gänsehaut pur :D
@gwadamit8116
@gwadamit8116 Жыл бұрын
Sadly 3x drivetrains are dying. I wish someone brings back the 3x group set. They are far superior compared to these unreliable systems. Like just think about it the places these drivetrains are used are budget bikes extreme low end and they are treated horribly. No servicing nothing yet they work no issues for a very long time more longer than most of these 1x drivetrains. They also have an incredible range which 1x and 2x can only dream about. And most of all it's best for uphill climbs wrong gear? Np just down shift the crank gear.
@workshopninjathe1st
@workshopninjathe1st Жыл бұрын
This group comes in 2x12 too - that’s as many gears as 3x8. I agree 1x maybe not have the range - but it depends where it’s being ridden. I worked in the Netherlands and fitted many 12-21 cassettes to 2x9 road bikes. But now I live in the Pacific Northwest and all we use here is 11-34. It’s “Horses for Courses” as they say 😊
@gwadamit8116
@gwadamit8116 Жыл бұрын
@@workshopninjathe1st even 2 by systems have same issues actually same as 1x cause the derailleur that comes with these have a capacity not more than 42 meanwhile the lower end Acera, tourney, altus can accommodate 46. 2x cranks are usually 26T-36T with 10T difference. 3 by gets you 22-32-42T pair that with 11-36T you get best climbing ability and incredible speed. The above 2x can be paired only with 11-42T cause derailleur won't handle anymore than that. Also these groupsets are ridiculously costly it needs the best maintenance else the chain or the casset gets worn out quickly due to tight tolerances my Hard tail which runs deore 10 speed is suffering from this issue which prompts me to not use it anymore.
@richardbryanesq
@richardbryanesq Жыл бұрын
Nice work.
@riskyrax
@riskyrax Жыл бұрын
Nice 👌
@andymuller5824
@andymuller5824 Жыл бұрын
Schönes Radl, die Farbe passt auch gut dazu, Danke fürs zeigen. 😊 Grüße aus Neuching 🙋‍♂️🙋‍♀️
@user-bk2ns2xk6n
@user-bk2ns2xk6n Жыл бұрын
Kannst du einen Tipp geben wie du die kettenlänge bestimmt hast? Kleines Ritzel und dann minimal gespannt?
@veloheld
@veloheld Жыл бұрын
Schau mal hier: kzbin.info/www/bejne/jKqmXq2CZteBgLc
@veloatlas
@veloatlas Жыл бұрын
wonderful, great build, fantastic music, unicorn at the end. It was a short movie ! Thanks
@SoManyMiles
@SoManyMiles Жыл бұрын
Klasse Aufbau und toll gefilmt. Das Bike ist ein Traum. ✨
@veloheld
@veloheld Жыл бұрын
Vielen Dank 👍
@paulvink64
@paulvink64 Жыл бұрын
Super trip!!! Gibt es dieser reise vielleicht auf Komoot oder irgendwo anders einer beschreibung davon!! Würde mich und mein sohn auch super passen!!!
@cyclingjason1686
@cyclingjason1686 Жыл бұрын
Front break is on left hand?
@veloheld
@veloheld Жыл бұрын
Yes, like normal
@MrGogogordo
@MrGogogordo Жыл бұрын
@@veloheldunless it’s a moto😂
@nuttynut722
@nuttynut722 Жыл бұрын
I bet he like pineapple piazza too
@veloheld
@veloheld Жыл бұрын
He likes all kind of Pizza…
@nuttynut722
@nuttynut722 Жыл бұрын
I won't go to a mechanic who stack canned pineapple in their shop
@veloheld
@veloheld Жыл бұрын
It's just fun…