14 күн бұрын
7 ай бұрын
9 ай бұрын
10 ай бұрын
Пікірлер
@matthewzimmerman5889 13 сағат бұрын
Please tell me your going to sell these when you get done
@davidbellamy9055 3 күн бұрын
This is a fascinating video. I've known you for a lot of years Art, but you continue to surprise me with your talent and skill. This is not an easy thing to do, but you seem to have picked it up very quickly. Can't wait to see all this all turns out.
@artwerksgarage 3 күн бұрын
Wow, thank you, Dave! That means a lot to me.
@titleistdl1878 11 күн бұрын
I just received my Gobi ladder. Did you have any visibility issues from your rear camera by following the 8.5 “? I have read online that 8” had to be used and trimming around the rubber door trim. You are the only KZbinr that I can find anything on the Go I ladder for LC200
@artwerksgarage 9 күн бұрын
I have a slight obstruction from the ladder in the review view camera. Maybe it's because my truck is lifted, but I don't find it overly distracting or blinding by any means. I would say you do have some wiggle room with the ladder placement, but not much and I'm not sure how much that would help.
@brianmay3669 16 күн бұрын
Who needs emergency brake when you’ve got emergency eject?!😆😄✌🏼
@artwerksgarage 15 күн бұрын
🤣
@dannyg43 16 күн бұрын
Dope man
@davidbellamy1403 16 күн бұрын
Wow! That's quite a piece of work and a lot of effort as well as skill. How many hours did you put in on just this piece?
@artwerksgarage 16 күн бұрын
Hey Dave. Thanks for asking. It’s hard to quantify how many hours this took me specifically as I did this over a few days, about a few hours a day. I guess this took me around eight hours to complete and I am still not quite 100% finished.
@Vivianauxito 24 күн бұрын
Another solid video, Just straight to the point with everything! We specifically produce LEDs for auto. Can we invite you to do a review for our product? We have emailed for an inquiry.
@artwerksgarage 20 күн бұрын
Thank you. Yes, but I haven't received an email that I'm aware of.
@Vivianauxito 20 күн бұрын
@@artwerksgarage Hi,I just re-sent another one. It could enter spam folder sometimes.
@ChrisH930S Ай бұрын
I’ve actually done this swap several times without taking the bumper off. Yes it can be done. Approximately 3hrs.
@artwerksgarage 25 күн бұрын
You, sir, are brave.
@davidbellamy1403 Ай бұрын
Looks like fun. She's so big!
@jeffreynewberry4287 Ай бұрын
Glad the damage is only cosmetic. Between this and the fox body it could be Artwerks body shop now.
@artwerksgarage Ай бұрын
Hilarious! You're right, Jeff!
@ClayClampett Ай бұрын
It was fun till it wasn't! Sorry brother!
@artwerksgarage Ай бұрын
You have to pay a price to play. I'm comfortable with that. :)
@TheMoirLabel Ай бұрын
💔💔💔
@davidbellamy1403 Ай бұрын
Bozo! I'm glad there's no serious damage.
@georgew5209 2 ай бұрын
Too much fluff. Many omitted steps. Definitely for entertainment purposes not instructional.
@artwerksgarage 2 ай бұрын
What steps were omitted? I have a fully functioning, new looking dash. It works good as new.
@trizzuth34 2 ай бұрын
Nice work here Art!!! Glad you pulled the pan to do this, that is def the RIGHT WAY TO GO here!
@artwerksgarage 2 ай бұрын
Thanks! I think so too!
@MilGrip76 2 ай бұрын
Red ftw. My red sock collection likes this.
@artwerksgarage 2 ай бұрын
That's hilarious! Thank you.
@samirchpk1 3 ай бұрын
How to get a hold of you over phone. Don't worry not asking you to sell LC infact i got one too and have questions
@artwerksgarage 3 ай бұрын
Contact me on IG where we can DM. Artwerks_Garage on IG.
@markmoore3975 3 ай бұрын
Love the kids bikes you gotta work around. Been there!
@TheMoirLabel 3 ай бұрын
😮💨😮💨😮💨
@artwerksgarage 3 ай бұрын
Sorry, but I think that went right over my head.
@TheMoirLabel 3 ай бұрын
@@artwerksgarage beautiful car, took my breath away.
@davidbellamy1403 3 ай бұрын
Great looking car, a true classic. Thanks, Art.
@arielrojas5262 3 ай бұрын
Hello, my transmission is a factory 6-speed manual (getrag 420g), but I have a problem with the bell housing bearings. Do you have a bearing kit that you can sell me for the bell?
@artwerksgarage 3 ай бұрын
Sorry, I do not. Your best bet would be to go through Diffsonline.com.
@markw5591 3 ай бұрын
Nice job mister
@samirchpk1 3 ай бұрын
Hi I am from Denver as well and got same LC as yours I have few questions how to contact you? Here is my email if you could send me your phone number I will call you. Greatly appreciate
@samirchpk1 3 ай бұрын
Excellent work go you
@89G 3 ай бұрын
Those seals are made to "reshape". I had to make a tool to get mine to compress back down. They are just like sealing rings in a transmission - you stretch them to get them on, then compress them again when they are in place. I have tools for 4L60's, 4R70W's, etc. But I did not have one for my Fox rack, so I made it from some PVC pipe. Unfortunately, I lost an hour of footage when I rebuilt mine because the camera went into heat protection. BUT, I may have some pics, or may even have the tool kicking around if you need pics.
@artwerksgarage 3 ай бұрын
That's interesting. I've never heard of that before. Thanks for the tip!
@sdmoparmaninsd6713 Ай бұрын
yep these are teflon seals, same thing with direct injection seals, you need to re-compress the seals with a tool (anything with a gentle radius or chamfer will do and some lube).
@artwerksgarage Ай бұрын
That’s very helpful. Didn’t know that. Good knowledge.
@matthorton1906 3 ай бұрын
Trying to copy me 😂
@sufianmalik6069 4 ай бұрын
thanks for sharing, seems straight forward!
@laurencecore 4 ай бұрын
Looks like the issue I just had happen. The cover plate to cylinder head that holds coolant, as well as the metal bracket that holds wire harness @ cam sensor. The torque spec has got to be very low because it took hardly any force at all to crack plate.
@laurencecore 4 ай бұрын
I see now in replies it has been mentioned. Please excuse. Well, at least it will show in comments first glance ;)
@konradjoniak2062 4 ай бұрын
This transmission was also fitted to E39 540i, am i correct? Could you provide me with BMW OE number for this exact transmission?
@artwerksgarage 4 ай бұрын
Yes it was also used in the 540. Part No.: 23007501757
@xjonnyz8736 4 ай бұрын
What is that yellow cable connected on the + pole on the battery?
@artwerksgarage 4 ай бұрын
I don't know for certain, but experience tells me that this yellow connector is the battery disconnect that occurs when you are in an accident and the airbags go off. If that happens the car will not run and, unfortunately, you would have to replace this entire cable.
@fromthebeginning6064 4 ай бұрын
Same exact thing just happened to me. Best part tho...the old o rings i took off went back to the same size as the new ones are, but the new ones once stretched don't go back at all. I guess add it to the rest of the trash being made today on chinaland...new rack it is
@ausguy4385 4 ай бұрын
Do one of the drive line greasing
@artwerksgarage 4 ай бұрын
I'm not sure a video is necessary. There's just a couple of zerk fittings on the front and back of the driveshaft. It's pretty self explanatory. But if you'd like a video I'd be happy to make a quick one....?
@Overlander2022 4 ай бұрын
Thank you for sharing!
@MrJamesfarias 4 ай бұрын
Hi @artwerksgarage, I just purchased my firts LC, I am very excited to start my build, its a 2016 but with just 30k miles on it ( a rare find). Unfortunately its black which I dont like, I really want to put those trd bronze wheels on it but they are hard to find and expensive, are those the HE ones? 17 or 18 inch? Or are yours the ones used in 4runners and sequoias? Im new on the Toyota world, thank you! Really like your video
@artwerksgarage 4 ай бұрын
Yes, my wheels are the bronze, 18", BBS, TRD wheels that come on the HE. I bought them from a shop that built a HE rig for a guy that wanted different, aftermarket wheels. I paid only $1,600 for the set! I know, I practically stole the wheels at that price. It's ridiculous how much they are going for these days.
@WBSAddictions 4 ай бұрын
How much do Jedder headers usually run
@artwerksgarage 4 ай бұрын
About $5k!
@WBSAddictions 4 ай бұрын
@@artwerksgarage not surprised jed does some crazy work, wonder if the performance gains are worth over like evolve or supersprints
@artwerksgarage 4 ай бұрын
@@WBSAddictionsI think the benefit of Jed's headers over the others isn't performance, but rather, quality.
@WBSAddictions 4 ай бұрын
@@artwerksgarage that I one million percent can see they’re pieces of art
@mikedurling2111 4 ай бұрын
For future reference when you do the diffs and transfer case buy the harbor freight multi use transfer pump. It will pump a quart of diff oil like that in like 6 pumps.
@claessjostrom565 5 ай бұрын
You are a brave man, a long time ago we used to convert these transmissions to dog boxes, we had a whole wall full of special tools. Foreman all ways came by and wondered why it took so long 😂
@nicolaimrkbrejnbjerg611 4 ай бұрын
@claessjostrom565 Do you know where to buy syncros to it??
@claessjostrom565 4 ай бұрын
@@nicolaimrkbrejnbjerg611 No I’m sorry I haven’t worked on these gearboxes for over twenty years.
@davidbellamy1403 5 ай бұрын
That's a lot of work, Art, but it's starting to look like a car. I can't believe how big the kids are!
@bigbadwolfxrp2800 5 ай бұрын
Looking good boys!!!
@StationRussification 5 ай бұрын
Wiring is cake ...
@88Mach1 5 ай бұрын
Hey I told you that in confidence. You're not supposed to tell the whole internet. 😂
@artwerksgarage 5 ай бұрын
🤣❤️
@Christhe4x4guy 5 ай бұрын
It's not the wiring it's the hoping the plastic doesn't break into pieces when taking it apart
@mrromantimothy 5 ай бұрын
Get you some fine Emery cloth like 2000 grit unplug all those plugs and clean the spades and their terminals do the same with all the fuses in the fuse panel, the same goes for the brain terminals and other places, since you have it apart take an air hose and blow all the dust you can out of there you will have a much better running truck
@ClayClampett 5 ай бұрын
Hey Art, what tires did you put on those wheels?
@artwerksgarage 5 ай бұрын
I'm really excited about these tires. They look really aggressive. They are Yokohama Advan Apex V601 XL. I'm running a square setup in the size 255/35 18.
@vosedon 5 ай бұрын
Glad to hear you rocking Com Truise!
@bigbadwolfxrp2800 5 ай бұрын
Lets do my 68 GTO next 🤔
@davidbellamy1403 5 ай бұрын
The bad news is, there's a lot of bondo and holes. The good news is, you'll no longer be a novice welder when you're done!😉
@artwerksgarage 5 ай бұрын
True. I've gotten much, much better at welding during this project.
@ClayClampett 5 ай бұрын
Joe is such a great friend ❤ that guy!
@mikearend997 6 ай бұрын
Wow, could really do without the tasteless music at the beginning!
@artwerksgarage 5 ай бұрын
That's the Beastie Boys! Apparently you need some culturing.