Hi, I followed your video but I cannot reproducing the panorama picture stiches/downloading. How do you activate that feature? Thx.
@bridishbirb4 ай бұрын
I do wish quick transfer actually worked! that would be nice :D mobile devices cannot even find the damn network even though it knows the drone is trying to connect ¬_¬
@MetroEastFarms9 ай бұрын
When doing a video Boss need to know the subject. Listen to it yourself again just a lot of unnecessary. went to another Video, Sorry.
@capo_cards11 ай бұрын
I have an atonstack s10 pro and will not connect anymore for no reason used it the day b4
@ragul7611 ай бұрын
Did everything but still unable to connect to the machine. What to do?
@jonrevell187411 ай бұрын
Thank you!
@fatikare19311 ай бұрын
Hallo - i habe am issue with my Laser it’s not connecting- I’ve tried a lot of things - I always get the code Glas read error 1000
@fatikare19311 ай бұрын
Help ! Please
@jonrevell187411 ай бұрын
I assume you use the lacquer before lasering?
@adypenney11 ай бұрын
If for use outside I do befor and after if just for a photo I do befor sometimes after
@y0a0n0i0s Жыл бұрын
Thank you for this, you just saved me from going to buy a remote like I previously had! Thank you
@adypenney Жыл бұрын
Your welcome need anything els just ask
@phethomakhadi5415 Жыл бұрын
Thank u so much
@adypenney Жыл бұрын
Hope it helped
@MrAmity009 Жыл бұрын
And what about the focus of the dot?
@Randomdudeinamerica Жыл бұрын
This helped me sooooo much!
@WAKEUPTV_ Жыл бұрын
Need help
@LunaFamilyVlogs Жыл бұрын
Hey, I just tried this and it is still saying connecting, any more help?
@Create2make Жыл бұрын
This was great help, made it very simpler to understand. Thank you
@adypenney Жыл бұрын
Your welcome. So i no how did you find my video
@Create2make Жыл бұрын
@adypenney it really helped in getting an understanding of the alignment. Took a week of trying but got there in the end.
@adypenney Жыл бұрын
@@Create2make if u need any more help juat ask my name on fb is the same here as well
@MeFixingEverything Жыл бұрын
Thanks
@adypenney Жыл бұрын
Glad could help
@andrewwebster3775 Жыл бұрын
hi i can not connector my laser grbl to my laptop i have install ch340 driver and it say it is download ok but it will not still connect to my laptop can you help me please and the machine is ebay 3018 machine
@adypenney Жыл бұрын
Which unit do u have is it a cnc with it being 3018
@andrewwebster3775 Жыл бұрын
@@adypenney yes it is a cnc 3018 can you help me
@adypenney Жыл бұрын
@@andrewwebster3775 let me pull out a 3018 out the workshop and hookup so can see how to contact one to that
@lockshot607 Жыл бұрын
O meu GRBL n conecta na máquina Ela é uma tts 10
@dennisanghelatos3302 Жыл бұрын
Hello from Greece. I have an Elexmaker A3 pro with mana be se ver. 3.2. When I am using Laserburn I have missing parts in engraving but the preview is ok. Will an update of the firmware solve the issue? If this is the case I ask for your help. Thank you Dennis Anghelatos
@adypenney Жыл бұрын
Is the engraving all the same colour on light burn.
@AhsaanRaza2 жыл бұрын
Thanks Sir 🙏🙏🙏🙏🙏🙏
@azrael7232 жыл бұрын
Thank you for getting straight to the point and with proper explanation
@adypenney2 жыл бұрын
Hope it helped
@mndshok2 жыл бұрын
where is the video on how to fix squares and circles?
@queenidog12 жыл бұрын
fixed my problem
@adypenney Жыл бұрын
Good glad could help
@davitsargsyan6002 жыл бұрын
I have a CV-01 creality laser, it does not connect no matter what I do. any ideas?
@Randy-mv3rl2 жыл бұрын
I keep getting the start message on the Grbl. But the bps does not want to change from 9600 to 115200 and stay?
@johnodom68742 жыл бұрын
lot of issues with new lazer yorahome 6550 wont connect to lazer grbl or light burn
@kylianengelbos32752 жыл бұрын
yo , this board got really expensive is there an alternative board u can use ?
@adypenney2 жыл бұрын
I will look see what other boards i can do it on that are cheap
@DymondGezzer10892 жыл бұрын
Only issue I had even set to 0.1 I was burning through the stick notes
@ilkokirov3912 жыл бұрын
Hello, I have A3 Pro engraver, but micro USB of arduino board has broken. Can you give me firmware so I can programm new board, please? Or tell me if the software GRBL 1.1 is compatible? I mean some manufacturers change pin numbers in sorce code...
@kyle-vi5sd2 жыл бұрын
My com doesn't show and it doesn't show up under port it does on usb but can't get com number that way I can't connect at all to laser
@thequarterman Жыл бұрын
I am having this same issue. Did you find a fix for this?
@MsMBrandDesign2 жыл бұрын
I'm going to try this tomorrow,I got given a "broke" k40 had to replace the tube , but it does fire up and I'm now trying to align the mirrors🤦🏼♀️😭 mirror 1 was not screwed down so I'm having to wing it. This has helped me to try and get n even beam. Thanks.
@adypenney2 жыл бұрын
If u get stuck my name on fb is the same as here
@MsMBrandDesign2 жыл бұрын
@@adypenney you are probably in the same k40 groups haha, that's great, and no doubt I will be needing the help. Thank you.
@johngabriel28502 жыл бұрын
Hi! I have an issue with my Atomstack to connect it to my laptop. I hope you would help me thank you. Im a beginner , i don't know what i did wrong at first but i have trouble with my laser engraver to start engraving every time the laser module went to the coner it makes an unpleasant noise
@BB-km5nv Жыл бұрын
Did you solve it I have the same problem for my atomstack
@MarshmallowsMama2 жыл бұрын
I have an ATOMSTACK S10 PRO and it's still not connecting.
@glenwojcicki17922 жыл бұрын
Have you got a detailed wiring plz for the board you are using You are doing great
@JohnMark613552 жыл бұрын
When I spray a clear coat after engraving, it darkens the slate and the engraving. So I have started spraying on a clear coat (satin) and then do the engraving. The engraved portion is lighter than if it were sprayed after the engraving. This increases the contrast if that is what you want.
@susanfahey29092 жыл бұрын
I cant get it to connect.. any help would be great
@adypenney2 жыл бұрын
Hi what laser do u have and what dose it say when you try on the rigjt hand side if any
@mrfoameruk2 жыл бұрын
I dont want to sound really stupid but what about the other wiring that goes to the K40 controller board. ie my controller board has a plastic metal-coated ribbon cable. I'm guessing it's because this is for an already modified k40 machine and not a stock machine as there seems nowhere to put it? I think the title is misleading if this is the first video you see when trying to upgrade a k40 from stock.
@adypenney2 жыл бұрын
The ribbon is still stock. Some k40s have them some do not the ribbon gose to a small board which has your limt switch on and the motor wire when changing over u will have to just remove the ribbon one and change switchs over. If u look at the side u see where the motor plugs in
@tomy81482 жыл бұрын
Awsome.can you share diagram? Thanks
@duartemachado11582 жыл бұрын
Why have two switches when you can just have one? I am not following. You basically have two switches in series?
@adypenney2 жыл бұрын
Works on which firmware u use some wont let u use test fire botton some will grbl firmware will but the smooth wont
@joaoamado782 жыл бұрын
Thank you for your demonstration, it fixed my problems in just couple minutes.🙏
@jeanrobertson21712 жыл бұрын
I am still having problems connecting to my Laser even after I changed my Bits pr second to 115200 under my Port Settings in my Properties. We are amateurs to this and need someone to guide us through this start-up process, please .
@adypenney2 жыл бұрын
Hi what laser do you have
@adypenney2 жыл бұрын
Feel free to messgae me on fb as well name on there is same as here ady penney
@GoldApeFury11 ай бұрын
I’m having the same issues with my mecpow x3 pro it won’t connect or be read I followed all the steps. Please let me know if you found how to fix the issue
@9_realms2 жыл бұрын
This tutorial is fab and spot on, makes all the other alignment vids on YT look convoluted and misleading. watched this and nailed my setup first time after failing on other vids. Thank you.
@adypenney2 жыл бұрын
Your welcome glad i could help. If u see anyone els on groups stuck feel free to send them this. Any other help u need just ask on here or my fb name is the same there as well.
@Cellgm20002 жыл бұрын
I'm stuck on this ... so will try again tomorrow
@adypenney2 жыл бұрын
@@Cellgm2000 do u still need help
@Opa102 жыл бұрын
Great video. But would be great to see this in action When you have not aligned it upfront
@adypenney2 жыл бұрын
What size would you like me to do a video on small co2 laser or big as works the same.
@Opa102 жыл бұрын
@@adypenney i just got a standard k40. Your video already helped a bit but did not understand what you did with the first mirror (next to the laser)
@adypenney2 жыл бұрын
First mirror i set with the gap like i said then only moved the 2 pins not all 3
@adypenney2 жыл бұрын
Are u setup now
@Opa102 жыл бұрын
All pretty good now.
@sitgesvillaapartmentneilsc79242 жыл бұрын
Looks nice Ady, Mines slightly bigger and is built in its own steel frame , will be on show shortly!! you need to wear eye protection with an open rig like that or box it him somehow.... We did Chri's first but re engineered the K40 box and made that a lot deeper and wider so we could fit the frame in, also used super fast bearings on the rails, it makes a massive difference to the speed but it adds weight to the whole unit so it has to be a strong container to hold it otherwise it would jump across the desk. i just need to finish off the X axis which is nearly done, put the tube in its supports, wire it up and then enclose it all in protective perspex and stick the extraction on the bottom. everything else is done but my illness is holding me up. Youve done very well m8. well done. regards Neil
@natashapennington22632 жыл бұрын
Video was very helpful after four days trying to align my laser I followed Ady instructions and was finally able to get my laser aligned and cutting perfectly.
@virgilgerlach9762 жыл бұрын
Thanks! Helps out great!
@muserbellamy11402 жыл бұрын
Hi adt can we have a wire diagram please as my wires are slightly different colour thanks