![How to Build Review : HG 1/144 RX-0 Unicorn Gundam [Destroy Mode] (ガンプラ) ユニコーンガンダム デストロイモード](/img/o.gif)
Пікірлер
@gofaras4816 20 күн бұрын
What pencil-like tool are u using at 4:32 ?
@pizzagundam920 26 күн бұрын
I love how clean this build is. Something about the simplicity with enough details that makes an HG so much more beautiful than the other grades .
@asmrbuildtv 25 күн бұрын
Thank you for the compliment 🥹🙏🏼 I wish I could make more videos like this again in the future
@michaelbrata5036 Ай бұрын
Nice video thankss :)
@quidzfarhassan4059 Ай бұрын
hi what is the difference between this and the magnum saber premium with the black box color?
@asmrbuildtv Ай бұрын
If I’m not mistaken, the chassis are different. This one is an older release compare to that one.
@kevinhone7526 2 ай бұрын
Last year I tried to put on the metallic gold, but broke the air brush nozzle. Then accidentally broke the waist and right leg because it was sticking together? Now I learned my lesson and decided to buy again. And this time I'll get it right and will become American Freedom Strike!!!! 😎😎🇺🇲
@aqilsyahmi1899 2 ай бұрын
Can you build gundam oo diver arch
@asmrbuildtv 2 ай бұрын
Actually I have that kit in my backlog but I don’t know when I will make a video again. Since I keep moving place at the moment
@aqilsyahmi1899 2 ай бұрын
@@asmrbuildtv okay I can't wait to see it
@留美竹井 2 ай бұрын
レジェンドBBサタンと一緒に並べて見たかったです。 いつか発売されて欲しいです！
@clintandrewledemsa1245 3 ай бұрын
Is kkmoon airbrush are good texture as tamiya's airbrush?
@asmrbuildtv 3 ай бұрын
I don’t own any tamiya airbrush so I’m not sure how to answer this, but kkmoon airbrush is a budget airbrush that I think still works fine for most of the project I did. The result is always depend on the skill and the correct paint ratio.
@myogetsu666 3 ай бұрын
is this still working after 4 years?
@asmrbuildtv 3 ай бұрын
Mine still working fine after I change the piston ring inside the air compressor (The ring can worn out) Now, I really seldom use it as it’s easy to get overheat if I want to use for a longer hour of batch painting. So I already upgraded to the airbrush with air compressor tank.
@GeNGiM 3 ай бұрын
Thanks for covering this. I am commenting kind of late but this same sander has a version where instead of a straight DC adapter (i.e. gives you a fixed speed of oscillation), you can get one with a potentiometer - meaning you can control the speed of the oscillation. Cheers!
@ferdiepalacios2622 3 ай бұрын
sorry .. i might have missed it somehwere. it puts out how much psi?
@asmrbuildtv 3 ай бұрын
Hi, this mini airbrush air output is about 25psi
@ivansoh5034 3 ай бұрын
Hi Happy Weekend to you May i know when will you upload a new video ?
@asmrbuildtv 3 ай бұрын
@@ivansoh5034 Hi, happy weekend sir. I’ve been busy lately. Yes, I will upload new video, currently working on the HGUC Banshee Norn kit. Stay tuned. 🫡
@dadduorp 4 ай бұрын
This looks remarkably similar to the Proxxon tool. Is it just branded differently in another country?
@asmrbuildtv 3 ай бұрын
@@dadduorp I’m not so sure about the Proxxon tool sir 🤔 I never try that one yet
@Repiuer 4 ай бұрын
Tictac?, what is that?, i cannot find it
@wakemydickup 4 ай бұрын
it's rubber cement , i think?
@asmrbuildtv 4 ай бұрын
yes, or you can search for Faber-Castell Adhesive Tack-It
@wakemydickup 4 ай бұрын
@@asmrbuildtv oh thank you so much man !
@jojom.7711 4 ай бұрын
nice work dude🙂
@asmrbuildtv 4 ай бұрын
Thank you but if you're a heavy painter, I suggest getting a better spray booth and a respirator to protect the lung. For small projects, then this should be fine.
@zeltrax3801 5 ай бұрын
10/10 ❤
@NotHiroo 5 ай бұрын
are u still using it? / is it still working?
@asmrbuildtv 5 ай бұрын
Hi there. I’m no longer use this mini airbrush since I already upgrade to a bigger airbrush. Yes it’s still working fine and but need to change the piston ring inside the air compressor once it’s worn out.
@LaughingKitsuneQB40X 5 ай бұрын
Why the torso so small? Isn't proportional for a whole body
@asmrbuildtv 5 ай бұрын
I actually also not sure about that 🤔
@reyvenpl3525 5 ай бұрын
Awesome work!!
@asmrbuildtv 5 ай бұрын
thank you 🥹
@박선민-f9p 5 ай бұрын
映像をアップロードしていただきありがとうございます. 先生.🙏
@Decade_Content-2007 6 ай бұрын
Một video thật tuyệt vời , nhưng tôi nghĩ bạn nên kẻ line cho nó
@asmrbuildtv 5 ай бұрын
I make a full painted version video for this kit. Can check the final result on my channel ☺️
@Mengakusaurio 6 ай бұрын
thanks for the video, at first I wasn't sure about buying this tool, but now I'm convinced.
@hectorbarradas8059 6 ай бұрын
So i'm here a bit time after and i finished las night "i think" and i full runner was left blue parts i believe is D , but went trought the manual and it seems is extra , is this for an upgrade or something??
@asmrbuildtv 6 ай бұрын
It took me awhile to look back at this kit manual book but the blue parts suppose to be from runner A. There’s no extra parts for this kit except for the v fin piece which from the E runner.
@curse.dmeme..3399 6 ай бұрын
Do the clear green parts have brush strokes? I can't tell from the video
@asmrbuildtv 6 ай бұрын
In this video it has slightly brush strokes. It’s depend on the paint ratio you mix, if the ratio more thinner in it, it might damage the clear plastic.and cause the brush strokes effect to the clear parts.
@azizijono6982 7 ай бұрын
So amazing.. Im really love you painting artwork.
@asmrbuildtv 6 ай бұрын
Thank you :D
@ampnomenbasaikou 7 ай бұрын
参考になりました！ありがとうございます！
@minhnguyennguyenminhnguyen9160 7 ай бұрын
Con you make a video about Amazing exia pls
@asmrbuildtv 7 ай бұрын
Good suggestions since I really like gundam exia. I will think about it 🤔 Stay tuned
@widhinugroho9141 7 ай бұрын
This tool look so nice🤔
@asmrbuildtv 7 ай бұрын
Yes this tool can be very useful to clean gunpla parts and my airbrush gun. It’s so easy to use and functioning as intended. 👍🏻
@ivansoh6957 7 ай бұрын
Good evening Happy Friday What kit will be painting for later?
@asmrbuildtv 7 ай бұрын
Hi good evening. I’m thinking to paint gundam exia at the moment 🤔
@samuraibachok5370 7 ай бұрын
@@asmrbuildtv Please come out the video faster 😁
@akpokwayeufuoma 7 ай бұрын
Please must I put battery because mine isn’t working
@asmrbuildtv 7 ай бұрын
If using the cable is not working, you might need to use the battery. If it’s still not working, you might need to check if there’s broken part inside the turntable
@paperjerry 8 ай бұрын
I've seen many Gunpla and plastic model videos... but never an ASMR channel for them. Thank you for sharing! I'm subscribing now! :)
@asmrbuildtv 8 ай бұрын
Thank you for the support 🥹❤️
@prokiller6963 8 ай бұрын
I paint the clear red part with blue color it look very nice like the perfectibility. You must try it too
@uchihasasuke-ss8lq 8 ай бұрын
Love to see you back uploading mate 😍
@asmrbuildtv 5 ай бұрын
Thanks for the wait and support 🥰
@INGRAMAHORO 8 ай бұрын
yo la uso con un potencio metro de 0 a 24v DC, de esa forma controlo la velocidad que necesito dependiendo del tipo de pieza que quiera lijar
@asmrbuildtv 8 ай бұрын
That was a good idea. I will try it someday. Thanks 🥹👍🏻
@gatoinsomne 3 ай бұрын
Ojo 👀 no le des más de 12 v, es lo máximo que tiene el original
@PortgasDAce-ds4xd 8 ай бұрын
it's been awhile brother! Wish you stay healthy!
@captainyani192 8 ай бұрын
I prefer to buy the RG one. more worth it
@angelyew_7814 8 ай бұрын
Long time no see you Happy!
@widhinugroho9141 8 ай бұрын
There is many tiny piece in this model kit 😅. I don't wanna loose it too💀. Btw, long time not seeing yourself, sir😁.
@asmrbuildtv 8 ай бұрын
There’s a lot of tiny pieces in this kit and I almost lost that one piece on the v fin there. But thank god I found it otherwise I need to buy a spare part to complete this model.
@widhinugroho9141 8 ай бұрын
@@asmrbuildtv Rg and mg unicorn will collect too, sir🤔. Iam curious about that 😅. Completed part for this kit its hard. As long as i know, metal part for mg unicorn 🤔.
@ivansoh6957 8 ай бұрын
Awesome Long time no see I have a question 1)（1）will you build collect Seed Freedom HgCe? - Destroyer Gundam - Rising Freedom - immortal Justice （2) will you build the SDW Heroes series? - war horse / war horse knight world ver -Shining Grasper Dragon/ Dark Grasper Dragon - Verde Buster/ Warlock Aegis Gundam - Wukong Impulse Gundam DX Set 2) will you completely the kit on the other series? (1) HgFC - Master Gundam & Fuunsaiki - GF 13- 050NSW Nobell Gundam (2) age - age 3 - age fx (3) SD - Zhang Fei God Gundam -Guan Yu Yun Chang V Gundam (4) UC Unicorn Series - Banshee - Phenex - Perfectibility -Full Armor Unicorn
@asmrbuildtv 8 ай бұрын
Hi there. Yes, actually I do have about 70% kits that you list there in my backlog though. But my progress is abit slower at the moment. Next build will be the Unicorn Banshee Norn (Destroy Mode).
@HuElvira 9 ай бұрын
I really like your video style and I want to work with you, okay？
@asmrbuildtv 8 ай бұрын
Hi 👋 that’s sounds great but I’m not so active on this channel lately. My progress is a bit slow at the moment due to doing other business.
@protocoldroid7388 9 ай бұрын
Good modelling! My cheap airbrush keeps getting clogged, think I need more thinner like you.