Жыл бұрын
2 жыл бұрын
2 жыл бұрын
2 жыл бұрын
2 жыл бұрын
2 жыл бұрын
2 жыл бұрын
2 жыл бұрын
2 жыл бұрын
2 жыл бұрын
2 жыл бұрын
2 жыл бұрын
2 жыл бұрын
Пікірлер
@ericwatler23 2 сағат бұрын
So once you lower the car with the lowering links, can you raise the car back up by pushing a button for some reason your car breaks down and a tow truck is coming? and how is the ride quality once you lower it? Is it the same as stock
@HQGARAGE Сағат бұрын
You still have the ability to set it to standard but it’ll still be a tad lower than factory. The ride is exactly the same as factory no difference at all
@mikefahey5270 7 күн бұрын
I'm sure I'm missing something here, but I clicked on the link to amazon to check it out and it doesn't look like it's including that extra cable that plugs in ?? am I missing something or is it not needed ?? Hoping someone sees this and replies I'd really love to upgrade my lights...Thanks
@betonthis1 8 күн бұрын
Its crazy I have bagged my 2015 Honda accord and never had this issue, bagged an E60 BMW didnt have this issue but put it on my F30 BMW and this does this exactly. Wonder why I have this issue on just this car. But great there is a solution to it! Thought it was a calibration issue.
@HQGARAGE 8 күн бұрын
If all your airlines are the same length you would never have an issue.
@DadbrosGarage 9 күн бұрын
Definately going to build me some of these. Thanks fella
@suspensefulness 10 күн бұрын
nevermind i was gonna add height sensors ..i think i'll pass
@TroyMoore-y8b 15 күн бұрын
I know this video is old. But do you remember where you connected the coolant reservoir after installation?
@naomitrevino1372 18 күн бұрын
How did you put the cover back on with the cord hanging out?
@HQGARAGE 18 күн бұрын
I tucked everything into the headlight area and then put the cover on
@dustinstrickland7780 11 күн бұрын
@@HQGARAGEI had the same question...hopefully there's room! 😂
@KGisthenameman 21 күн бұрын
My guy that Chevy sounds glorious!
@HQGARAGE 21 күн бұрын
Thanks dude
@KGisthenameman 6 күн бұрын
What cam do you have?
@ernestohernandez8723 22 күн бұрын
Nice updated 👌
@HQGARAGE 22 күн бұрын
Cheers 🍻
@alieshasvlogs1301 23 күн бұрын
Please 🙏 can you come to the bmw gallery 😊
@HQGARAGE 23 күн бұрын
When do you want me to come to the BMW gallery?
@alieshasvlogs1301 23 күн бұрын
Yo. Ho bmw when is 25 can you come to the bmw gallery if you see the honda accord that s me
@josephhanna7056 24 күн бұрын
Why my chip for automatic mode also part of blinker is gone of the headlight got burnt when installed LED lights fir my Hyundai Elantra 2019 on Low beam/High Beam Hb3 and DRL P21/5W why is that? They were showing error on dadhboard for DRL when we installed it and now Inhave to change the whole headlight? Because chip cant be changed. Be aware of LED guys
@aaronhoughtaling6829 28 күн бұрын
Going to do the front bumper as well?
@HQGARAGE 26 күн бұрын
Nope I like the look of the sport bumper on the front.
@aaronhoughtaling6829 28 күн бұрын
I’ll be excited to see that finished with the tailgate on. I swapped my rear step bumper with the sleeker sport bumper. Surprised how much room it gave me walking around it in my garage. Hadn’t thought about this
@HQGARAGE 26 күн бұрын
Ya I have been checking out trucks with and without at car shows and I like the look of the roll pan.
@jamesharbin6276 29 күн бұрын
Will this help with swaying? Mine sways back and forth so hard
@ronwoods1 Ай бұрын
As always great work buddy
@HQGARAGE Ай бұрын
Thanks man 🙏🙏
@donfoy4304 Ай бұрын
What do you do with the three wires that come off the box, red, yellow, and black?
@brianwagoner2588 Ай бұрын
Nice
@brianwagoner2588 Ай бұрын
Just wanted to say thanks for showing me the door seals. Ordered new ones and the worked perfectly 68c10 civic door seals. Unbelievable on how accurate they are.
@danygagnon1010 2 ай бұрын
removing the tire reminds me of my old 2009 civic. thanks for all the info
@msreeree65 2 ай бұрын
LOL the starburst candy
@noelelnolo9642 2 ай бұрын
Good video and good idea to go trough the lining. One question, the link to the led comes to a different brand, are u not recommending the ones u used? Also, did u need to correct the inclination of the lights after installing? Thank u
@calebyron6535 2 ай бұрын
What headlights and turn signal lights are you using? They look great and would like to get some for my 68. Thanks
@HQGARAGE 2 ай бұрын
Headlights are from Amazon and the signal lights are made by me.
@HQGARAGE 2 ай бұрын
amzn.to/4f8LpMZ
@pollogarciaduran13 2 ай бұрын
What did you do for the one reading backwards? I got 1 doing that
@Kaponi_21 2 ай бұрын
Those headlights are oem or replacement?
@HQGARAGE 2 ай бұрын
They are OEM
@Brewslayer1 2 ай бұрын
Where do I get that LED headlight assembly trim mine is the basic and I would love that led trim added to my car
@rocketfarm5352 2 ай бұрын
Great video built a sets used Mike Holmes "Glue it and screw it " method three tubes of PL adhesive nothing will move thanks
@chokocrispi2012 3 ай бұрын
How many inches was the strap
@zainanser6871 3 ай бұрын
Just one question before ordering. Can someone tell me if these leds are used for high beam as well? I have the same elantra. Thanks!!
@josephvella3688 3 ай бұрын
3 years later still helping people out! Just did a kelderman lift on a f450 having the same problem. This makes total sense. Can't wait to try this.
@JackRosson-ui7nt 3 ай бұрын
Nice tip bro. Just picked up my 67 got a project myself but definitely need door seals appreciate the video. I made a short as well of my truck. Take a look😊
@geraldwashington7686 Ай бұрын
Great Bro. I appreciate the tip. Arlington, Texas.
@GoodasCoffee 3 ай бұрын
04:18... Your enthusiasm is contagious! Excellent build!
@kalanikeone3386 4 ай бұрын
I just watched your video and had some questions? I wondered where did you put the control valve??? To make the rear drop at the same speed at the front. Your video helped a lot
@HQGARAGE 4 ай бұрын
The valves were put on the lines going to the rear bags.
@kalanikeone3386 4 ай бұрын
@@HQGARAGE so I am running 3/8 line system to the 1/4 line off of the struts and bags. And the reason for this is I want the lift and lower to be faster. Now at first I was thinking that I was supposed to put the flow valve to the rear bags so that the fronts would drop at the same speed as the rear. I thought to restrict the flow in the rear will make the whole car drop at the same time. But you put them on the front lines and now I’m confused. Could you please give an explanation so that it makes sense to me??? I’m just learning and want to know more that’s why all the questions
@HQGARAGE 4 ай бұрын
I appologize, I confused myself. The valves went on the rear lines because those lines were so much shorter than the front lines. Which slowed the air coming out and going in so it would air up and down at the same speed as the front
@kalanikeone3386 4 ай бұрын
@@HQGARAGE thank you so much. You don’t know how much this is helping me. Appreciate everything
@pollogarciaduran13 4 ай бұрын
About to install my 3h on my 350z but couldnt find anyone installing them. Hopefully tgis helps me out
@brianwagoner2588 4 ай бұрын
Hello. I know You have a video of the door seal from the inside of the truck showing sealing, I cant find it? Of course Im in the same predicament! New seal wont let door close. I dont want the glue on seals. Picked up a used one from wrecking yard it works really nice. wanting to see what you did with the flap?
@meza5207 4 ай бұрын
Wheel specs ?
@HQGARAGE 21 күн бұрын
22x9 transports
@greyscaledoughnut3479 4 ай бұрын
Where can one get this sheet of carbon fiber pressed abs?
@porky1369jr 4 ай бұрын
Awesome videos. Just subscribed.
@HQGARAGE 4 ай бұрын
Cheers 🍻 Thank you 🙏
@classicautoclips 4 ай бұрын
My 2019 Elantra led DRL are not working. Is there a way to fix them
@josemanuelhuertavazquez7661 4 ай бұрын
What headlights?
@HQGARAGE 4 ай бұрын
amzn.to/4fQaOMd
@aaronhoughtaling6829 5 ай бұрын
You should do an updated version of this video. It has really changed a lot
@HQGARAGE 4 ай бұрын
That’s a great idea
@aaronhoughtaling6829 5 ай бұрын
You did a good job! It might not be my personal preference for my c10. But I recognize the skill it took and the time. It turned out nice and looks very professional. I’ve enjoyed seeing your skills as you work on the truck and see you push yourself. It has been very encouraging. I unfortunately haven’t touched mine in sometime. I took the windshield out and replaced the panel above the windshield that was rusty. I found a nasty mouse nest in that area. Spent a lot of time pulling all the junk out they crammed in. You can use your visor pivot holes to stick a blow gun in and clean it out. It’ll fall out the b pillars. Hope that tip helps you. Unfortunately I haven’t quite finished this task or touched it this whole summer
@HQGARAGE 5 ай бұрын
Thank you for the kind words and I appreciate the tips and tricks with the headliners. It has been such a fun learning experience and am blessed to have enthusiasts like yourself following along. 🙏🙏
@aaronhoughtaling6829 5 ай бұрын
@@HQGARAGE yours is definitely my favorite to follow along with. It helps it’s just like my 71 gmc that is even orange as well. That and you seem to do things on a realistic timeline in practical ways. It can be fun to watch but I don’t really enjoy the builds people do. When they’re so over the top that I know I will never be able to afford to replicate in any way. Our life here is short. Maybe I could dedicate a life to an over the top truck. But in the end I’ll have to answer to God for how I spend my time and efforts. I try to involve my kids when I can and let it be a family project. Teach them and encourage them to learn how to do stuff. And see their hands are as capable as anyone else’s. With enough patience
@MiamiElectrix 5 ай бұрын
hv you ever installed similar diffuser to a c43 amg?? hving issues getting the correct wires to connect to diffuser light..
@HQGARAGE 5 ай бұрын
I have not but if you have a multi meter it would probably help your install. That’s how I figured it out on the m3
@ndrsg3013 3 ай бұрын
Connect the multimeter. And press the brakes. When you press brakes the voltage or ohms will kick... Ground write is normally black(at least in Europe) 🫡🪖🚀
@juanandrade4932 5 ай бұрын
Where did you get that led strip on your head light? Mines just a chrome finish
@HQGARAGE 5 ай бұрын
That is a factory headlight. Most of them here in Canada all have them.
@zainanser6871 3 ай бұрын
Are these leds used for the high beam as well? Will really appreciate if you reply. Thanks
@HQGARAGE 3 ай бұрын
Yes you are correct. The one bulb is used for both low and high beams
@zainanser6871 3 ай бұрын
@@HQGARAGE Thankyou. Much appreciated 👍
@Thatguy_F80M3 5 ай бұрын
Was the coding done for the flashing when you brake ?
@isrealperez9069 5 ай бұрын
How do you remove it if you have to do an oil change in the front
@ysidro000 5 ай бұрын
Did making the ride stiffer help with wheel liner rub? Having the same issue
@etho495 5 ай бұрын
What size E Torx did you use for the rear strut bolt ?
@McGoogger 5 ай бұрын
Noice
@stephaniefay3741 5 ай бұрын
I just got a 2010 535i xdrive whose previous owner lowered the rear. I want to return it to the original height; can I just replace the springs with the originals or do I have to replace the whole component? Thx!
@HQGARAGE 5 ай бұрын
You can just replace the springs and you will be good.
@stephaniefay3741 5 ай бұрын
@@HQGARAGE yaaaaaay! Thank you for your reply! Great news.