I see no reason why not although I gave up on apple chargers many years ago in favour of other brands.

U

Not noticed this

Metal

I agree it is much easier with magnets. I guess it’s a cost thing. Do sometimes charge mine on the phone charger for that reason.

I’d wonder whether this is a battery management thing on the iPhone itself. The phone slows charging around 80% and tops up just before it anticipates you need it based on daily charging / usage pattern. Not something I have noticed with the charger.

I have about 20 of these and to date all wearing fine. The texture of the cable is changing at the hinge point slightly on the one my son uses constantly attached to his Nintendo but no signs of failure in sight.

Does it work without the case?

@@TheAnkerMan yes it works without the case. I actually just received a response from Quadlock. Looks like it may be Apples fault breaking compatibility. Here is their response; “Whilst our MAG cases have traditionally worked with MagSafe Certified chargers, with the latest generation of iPhones, Apple has changed the distance that their charging coils will connect from, meaning whilst our cases have not changed, there may be compatibility issues with some versions of MagSafe chargers and iPhones in our MAG cases.”

I somewhat agree. Minimalist is a big draw here for me but it’s certainly up there with the more minimalist designs.

Yeah this gaudy baroque Versace style is truly an eye-sore.

Yeah, I’ve noticed that thanks . Too late to change 😬

Hi, the 621 is a standalone model (but without a stand)!! The 622 is now updated and still the 622 but key change is power and lights now on side of pack and has a power off function.

Wired charging on these does increase charge speed

@@TheAnkerMan I think most are 20 watts in and out wired so yeah faster than 7.5 watts for sure

Enjoy

No they move around if touched but only if touched!!!

It will charge wirelessly at 15w. Which is still pretty decent however!!!

Keep an eye eye out for offers

Yes and no. iPhone has a mode that will learn your charging pattern and charge your phone most of the way to full then slow down / stop charging until nearer the time it expects to be used again, before finishing the charge. This preserves battery health and can be set up in battery within settings.

If your phone is dead, it will charge until 80%. Charge the other 20% 2 hours before your alarm goes off

They have been recently running promotions via Amazon and on the anker site.

They have been recently running promotions via Amazon and on the anker site.

if you are looking for an economical stand go for the Satachi 2 in 1 stand

It does get warm while charging. Never been a problem though. And not too hot.

What gets hot? Phone or powerbank?

This will depend on the version of the watch. It has to be a model that supports fast charging and also supports fast charging at 5w. This would exclude older versions and also the watch ultra.

@@TheAnkerMan I have an ultra 2 and a series 7. Does the Anker cube charge as fast as the fast charger that comes with the watches if I’m using a 20 watt charging brick?

Agree, while some watches fast charge at 5w the ultra for example needs more. Either way this will still happily charge your watch overnight without blinking so not a massive issue in my book.

Sorry for delay. It should be on. Been doing some research. There are several limiting features in IOS but turning off night focus should help. Also battery saving mode will disable always on. Will only stay on on pro models of IP14/15

@@TheAnkerMan Battery low power mode is disabled. The default Sleep focus is active overnight; perhaps an app needs to be added to that focus’s list to enable always on?

I agree. Apple has created something very good yet created too many conflicts for it to work seamlessly. Try toggling the filters in sleep focus for display to see if that helps (I’ve not tested this) I also note that even if low battery mode disabled then sleep mode can be set to activate low battery mode when sleep focus on. Another potential workaround would be to configure do not disturb mode to allow any notifications you want to remain active and schedule this overnight. Hope this gives vyou some joy. Good luck

Yes we have the feature on the reg 15 but it only stays on only the pro phones why is the million dollar question why apple even add it to the reg models if it’s not gonna perform correctly.

@@TheAnkerManSo I overrode Sleep focus. Used my Personal focus. The display remained on all night! (I was also awakened by notifications a few times.) So it would appear I need to adjust Sleep focus some how to enable Standby always on.

It will support charging with a case as long as the case supports wireless charging. Best check with the case manufacturer.

Hi thanks for the reply. From my viewpoint this is a quality stand first and foremost. Its beauty, simplicity and doing what it says on the tin make it my favorite. It looks great and is of high build quality. It allows fast charging at 15w wirelessly which not all stands will do plus charging for watch and buds. Not all stands allow landscape mode or allow landscape mode in such a compact stand. The fact that the top is tiltable also makes for a better nightstand. This is all personal preference but I have been very impressed with it. I’ll post a comparison of ankers other new 3 in 1 charger but the cube remains the best in my view.

Dude u using Apple devices, overpriced is part of the experience

Hi, does the watch charging puck come out far enough to accommodate an Ultra with a protective case? Many thanks

Hi, I can’t comment on this I’m afraid. I have yet to try a solix.

With iPhone pro and always on display it stays on if you want. Older iPhones without always on will go blank after a short time but simply tap to wake

Hi, yes I see your point but you will be pleasantly surprised. This is a weighty little beast. It weighs just less than a pound at 410g and has a rubber base to prevent slipping. Whilst it can be moved you’ll not do it by tapping the screen. I’d say the main reason this may happen is when detaching the phone due to the strength of the magnets. This is easily overcome by using a second hand to hold the cube.

Thanks, do you think Anker is that much better to be worth such a premium over other brands ?@@TheAnkerMan

@@joebishop7909 I started buying Anker products because they offered a premium product often for cheaper than the big name brands. Anker is now a big name and whilst many of its products (in my opinion) compete very favorably on price this cube is priced on the high side. I really get it, I wanted to buy 2 but couldn’t initially justify it. When the cube arrived I very quickly brought the second. It really does feel like a classy product and much better than any other bedside stand I have seen (in my opinion).

Thanks, do you notice the iPhone getting hot while it is being charged ? I just got a new 15 pro and am in need of a charger.@@TheAnkerMan

@@joebishop7909Mine doesn’t get hot. It only ever gets barely warm and it rarely ever does that. It’s mostly lukewarm to the touch.

Glad you enjoy it!

This will charge MacBook Air at max speed with the right charger. It is not a thunderbolt lead though so will not reach max data transfer capability if used for this.

Welcome 😊

Power delivery is the standard for fast charging and this lead would support fast charging from a PD charger up to 100w

I will try my best