How to adjust with a 175 psi?

Get some caps on that fdc

This is not good because 2½ inch pipe is not fixing essy is to much problem for treading

Bro that panel came out in 1992 it is not made anymore

Thieves thank you for making this widely available for their arsenal of ways to rob a business.

Eye protection.

Man. You're the best. I hope you're doing greate!

Slightly wrong. The difference between supervisory and trouble, is that supervisory is a kind of "alarm" condition. That means you hook something up to a zone, and tell this zone is supervisory. If there is a problem with a detector on the supervisory zone, you will get a trouble. It isn't limited to power, it can be all troubles. Think like this: If you get a open loop on a supervisory zone, it will react with a trouble. However, if a supervisory device trips, it will short the loop, giving a supervisory signal. So basically, if you wire a pressure switch to a fire alarm zone, and tell the system the zone is a supervisory, then you will get a supervisory alarm. Change that zone to a "fire" zone, and the same pressure switch will pull a real fire alarm. A trouble means theres something wrong, for example, if that pressure switch breaks and become open loop totally, then you will get a trouble signal instead. In burgular alarm terms, "supervisory" is same as configuring a zone in your burgular alarm as "Temperature alarm". This zone, if its trips, will cause a temperature alarm to be sent to dispatch centre, and they call you and say, for example if you named your zone "Fridge", they will say "hey your fridge has some problems so its not cold enough". However, if that zone is shorted or opened, ergo having the wrong resistors, it will still react with a "Tamper Alarm" and sound the alarm. (which is same as "Trouble" on a FACP).

Awesome Thank you

This is not a pressure reducing valve, it is a pressure restricting valve.

Hutry am burnin

How do you clear a supervisory

Good stuff man ..you just saved me a lot of time..I literally just installed six of these now I’ll be setting the pressure that’s required and going home early on this nice Saturday..Thanks again local 483..

How well does this work when a door closer is attached at the top?

Could you use the test header to fill your apparatus by accessing the storage tanks of a building? Like in the event of emergency where the water supply was cut off to other parts of the city.

Non-destructive entry is a fantastic first option, as it allows you the potential for more flow control. Thanks for the video!

Thanks.

Nicely explained sir ...can u guide me about how repeater panels connect with a network card to the main control panel to next repeater panel..

Would this method still work on a newly installed (no dirt build up) store front door that was exactly the same?

Very good.