Spot on my friend. Seen it many times here in Iowa. Job security for small engine repair shops. I use strictly canned ethanol free fuel now. More expensive, but no issues. Thanks for the video.

Is this a small wheel kx85 with big wheels

Is that big wheel on a small wheel kx85 if so how did you get the back wheel on with that small amount of space

Buddy you are not using the tire tool correctly, you need to use tire lube and you need to push the parts of the tire that you already have on your wheel into the well of the wheel ?

buy a lottery ticket

We’re running ITP mud lite II 26” tires on both our 570s. They’ve lasted way longer than the factory tires

Alex took our 2018 Outlander 570 into our pond a few years ago lol. Several oil changes later and a few other parts and it was good to go. Many hours and miles later it’s still running

It's full. No maintenance to be performed here. Lol

I sent you an email - hope to hear back.

Hopefully mine also

Haha it's probably better than factory. I wonder if these would work good for plastic body panels on cars too!

whichever customer that was is gonna probably fall out of the air

Giveaway!!! for everyone you scammed

should do a giveaway for it since you put so many people through pain

Great video. When I opened up my 2004 Artic Cat 4x4 5 speed semi auto trans FIS 400 four wheel drive actuator I found the connector to be corroded. Some wire cutting, some sauldering with a quick check on the board with the 2 switches you show here and she was working great again. 🎉🎉😅 😊

probably bought the gear puller brand new and charged the customer for it. Guys a rip OFF

no wonder why yall take months and leave customers stuff to set and rot LITERALLY then charge them for what your good looks 😭✌️❤️ you need to stick with working on lawnmowers

What would cause one of them engines to just let a push rod fall out of it? Could it be a sticky valve? My son put it back in and now it smokes a lot. What could be the issue?

Thanks for following us Michael!

Niche has new actuators for about $114. They sell other parts also.

How much it costs

How about a bit of tire lube and drop the axle all the way through.

Use the branded WD-40 spritz bottle? I've used them for years.

There is proper tire lubricant as well

Unless theres a mousse in that tire, im not sure why you got the bead seated instead of squished into the middle of the rim...

Need to learn the basics to tire changing before you use the big boy tools. Where you’re soapy water or tire dressing. One must understand and know “drop center” to be able to install any tire. Start over !

Yup user error…. The red block needs to be flush against the hub… if you check other users, they all said the same thing and you get full use of what the cam is supposed to do… that being said, the video is a great example of how to get frustrated by using it incorrectly

Why does this dude have the tool up so high? You don’t have to be an engineer to realize it should be pushing away nearly flush from the hub to the tire bead. Wonder if it was intentionally done wrong to get clicks or stain the tool, or if… well, you know 🙃

Stick to small engines and instead of making how to videos. Try watch a few.

It’s supposed to be flush with the hub you doorknob

Recommend spraying the bead with some soapy water. Definitely would make it much easier.

Use error right there

Can I ship you mine and have you fix it? ?

Breakfast of champions.....

You need to put the bead of the tire that you have already put on the wheel in the drop center of the rim just like you would do if you were using spoons..... the bead of the tire is in the seated position it needs to be in the drop center of the wheel so you have the slack to finish getting the tire on the rim

Sir, thank you for putting solid information out there , I had the exact same thing happen on my 2003 yz 85. I hope your business continues to grow. May the Lord bless you and your family.

On your baja no pinch tool video, you ask for comments, but it is set as "made for kids" which disables comments.

I hve a 07 artic cat 400 trv ..4x4. Not working … mine is a flat 3 wire plug , can’t find one to order .. watched ur video and might try taking apart cleaning see if it works ..

Thanks for sharing, it would be interesting to see you pull the seals and replace.

Might as well replace the crank seals while it's out

Keep it up, KZbin will be great advertising.

My older brother gave me his leaky 345 a few years ago to fix. Just gettin around to it and found your video. Thank you very much for that and greetings from northern Michigan

If you're not shooting shorts, why not shoot in landscape? it's much nicer to watch.

Your a good dad

Are you in South Africa

Ohhhh man let's hear it rip!

Just curious what's parts and labor charge for that???

Thanks for the info!

No send it

😂😂😂😂