Hi Mark! Great video! I need to ask you if you can draw me a plan for a cone like this and how much you charge for this job. Thank you!!

I'm trying to figure cut length for half circle, would I just divide the full circle length

A very intelligent and comprehensible presentation of an important geometrical aspect. Thanks. Regards!😀

This was very helpful. I am a math idiot but this was very clear and easy to follow. I frequently need to calculate frustrum patterns for different metalsmithing and engraving projects. Occasionally I can do it with dividers but so often it just isn't practical to do it in that manner.

As someone who always struggled with maths, but is always tinkering and creating things out of metal, this was absolutely perfect! I own an old ring roller and could never quite work out the exact measurements, this was so helpful and easy to understand. Thank you so much for taking the time to make this video.

Thanks 🙏

THANK YOU SIR !!! Amazing how many people on KZbin try to explain this and either miss the mark or make it complicated. I am a fabricator and bend a lot of metal and had to make a sheet aluminum circle for the first time.

greetings from Phoenix Az igot a Question? the swtch come with the torch? or how do you get the switch torch

Thanks for the explanation

Thank you

Dear sir it's very useful video we need more videos

kzbin.info/www/bejne/kIvbcqCMpZalprs

I’m taking 1st year Dual ticket Welding/Metal Fabricating course. This video helped me so much! Thank you :)

hello Can you show a Round to Round . how to lay it out to be plasma cut. top 35 inches, bottom 6 inches , 14 inches tall

Thank u sir I had needed help im new to this u sir made it possible straight forward info hands on training more action thank you

Mt full explain

(Small original radius*diag distance) / (large original radius - small original radius) = small cone radius. Add diag distance to small cone radius to get large cone radius.

Please upload video of truncated cone with 45deg. Inclined branch pipe with hole pattern when flattening the cone and branch pipe also. Branch pipe dia. 600mm Cone :samal id 900 mmx large I'd 2000mm x Height 1000mm

This is by far the best presentation way to teach someone on a board! Although I can't help but think about if the presenter or teacher has to draw the number inversed or is there a program that does it somehow?

Haven't seen or thought of trying that step off method. Love the Math! Nice Work

Holy fuck you’re snnoying

You lost me a little on the 1/2 1/2 1/2 1/2 thing. Watched it twice. But by following your math I gather what your saying. I would of guessed you would add MTx2 so this helped me out. Thanks

Thank you for your help.

Thank you so much!

I have this Phoenix 505 Expert 2.0 puls MM TDM MIG welder. I was trying to weld aluminum with 4047 filler wire. Now its voltage correction knob is not working. It is freely rotating without any clicking sound and no change in the voltage correction value. How can I rectify this ?? Please help

Brilliant…. Thank you form a jeweller.

iv'e been a fabricator for over 20 years and 16 l/ min is a bit excessive for solid wire. 13 l/min is ample.

Must have been around 05 I was doing a right off for a lad my 4 1/2 Silverline grinders backing pad was a bit worse for wear had it for years had a spare one I was given years ago went to stick it bloody hole was to small thought should I slaver on going to the auto-refinishers and buy one or spend 5 min's filing the who out cheapskate in me won , busy grinding BANG WTF switches grinder off big caught the edge of the metal ripped into flexy disc and put a nick in backing pad thought odd but just changed disc because I was almost finished switches grinder on awful vibration touched the job BOOM massive punch in the groin , pulls my pants down a bit monster red mark on the right hand side , cut a long story short I had put a low speed backing pad on a high speed grinder , next had a black n blue mark the size of my fist all because I was in cheapskate mode .

Awesome,

Would you apply a similar method for an offset cone or use the radial line method instead?

Good one

Dear marks kingdon Excellent video for learning purpose please share your email ID I want to thank you personally good 👍

Great one

Thank you!

Awsome

www.onlinecadtools.com/myindex_en.HTM www.onlinecadtools.com/english/html/sheet_metal/index.HTM www.onlinecadtools.com/english/html/index_curves.HTM free onlain tools for sheet metal, gears, curwes and other

thank you sir i never know how to use the divide command now i know. thanks from Bamenda Cameroon

What is the benefit of a lobster back compared to a usual 90 ? looks like it needs to be welded on regardless

Sri Hindi me banye

Sri hindi me banye

impressive that you write roman characters right to left.

Thanks so much, just what I needed!

Thank you for this video. I am sewing a cover for an outdoor fire pit and needed to accurately create a cone for the top. This was easy to understand and helped me greatly!

Very helpful thanks

it is useful.. Can you please upload the link of the Autocad file with in description section as we can review the sheet in detail. Thank you

Great work passing on to year 2 competenz NC students AAA++++

Good Sir. But how to draw brown color line(projection Line)? pls show sir another video for more clarity...Thanks Sir..

I want to know how to have a constant area. i need to loft a rectangle to a circle for a laminar flow. hope if someone know please let me know, Thank you

Usefull ! Thanks sir

For hindi