FUBAR Model Yard

Пікірлер

@bigeddie1231 15 күн бұрын

That is a great update to share and I really do like that color. I’ll be watching for more updates.

@fubarmodelyard1392 15 күн бұрын

@@bigeddie1231 thanks Big

@bkmodelcars 16 күн бұрын

After i blowed the original engine 70 aar short block is what I bolted all my Demon goodies to Hey you might be able to tell me My Demon had a bench seat What kit would be closest to my seat She's lookin good Good to hear from ya. ✌️

@fubarmodelyard1392 15 күн бұрын

@@bkmodelcars thanks brother. Shame on you for grenading a 340. There's assuredly more but the 78 dodge truck kit has a bench seat. So do the moebius early dodge and Plymouth kits. But hart's parts has a straight back A body seat with removable headrests in resin. That's what I would go with

@bkmodelcars 15 күн бұрын

@fubarmodelyard1392 thanks Benny Yea i was a pretty serious drinker back then it's popping that engine wasn't neared as horrific as the damage a brick wall did at about 70 mph

@fubarmodelyard1392 15 күн бұрын

@bkmodelcars at least you managed to not meet the same fate

@actiongal1O1 17 күн бұрын

this was a pink surprise in my feed! that's a cute colour for a cute car ;)

@fubarmodelyard1392 16 күн бұрын

@@actiongal1O1 yeah it's been a few months. Strangely that wasn't a popular color with guys who were buying muscle cars. Thanks for stopping by

@ModelCarMinion 17 күн бұрын

MPC..."nuff said!". Good to see you back in the model yard. Hope you can find a suitable engine for that build, seems like so may 3D printed parts available now.

@fubarmodelyard1392 17 күн бұрын

@@ModelCarMinion thanks Steve. Mpc is known galaxy wide for their engines. Gonna put the coil packs on the front of the engine and see what's up

@MadGeniusProductions_MGP 17 күн бұрын

two and a half years....great video Jerr...I mean Benny hahaha. This looks great though and I know others have "sponsorships" from Scale Finishes but you were the OG of using it and that's how I learned about it 7yrs ago. I have to go back and watch the whole Arthur series. Good to see you man

@fubarmodelyard1392 17 күн бұрын

Thanks brother. Didn't seem like 7 years so I checked and damn if you aren't right. So I put Arthur in a playlist for your convenience.

@HobbyLinkInternational 17 күн бұрын

Looking good Benny! Now dirty up that workbench before Chris cries lol

@fubarmodelyard1392 17 күн бұрын

Thanks brother. Cats are taking over for the night

@thecaptain2521 17 күн бұрын

Great to hear you buddy!!! Lot of work on that engine. Gonna be cool!!

@fubarmodelyard1392 17 күн бұрын

Thanks Cap. If I move the coil packs to the front of the engine it might fit

@ChrisK-LTC 17 күн бұрын

Looking good Benny

@fubarmodelyard1392 17 күн бұрын

Thanks Chris

@TaurusMoon-hu3pd 17 күн бұрын

Finally pt 2! 👏🏼👏🏼👏🏼👏🏼

@fubarmodelyard1392 17 күн бұрын

Yeah. Miss me?

@TaurusMoon-hu3pd 17 күн бұрын

Of course! 😁

@happy5811 28 күн бұрын

Fantastic presentation, FUBAR Model Yard! Looks and sounds amazing! Excellent sharing. Continued success. God bless.

@edwardnash7411 2 ай бұрын

I know they could have done better but if we want to get some young kids back into the hobby the Demon is a great kit that is the problem with the hobby world it has got to precise to the real one It is a MODEL let the kids get back into the modeling and just build it out of the BOX

@fubarmodelyard1392 2 ай бұрын

@@edwardnash7411 topside it's a good kit. That's why I said it will look great on the shelf, just don't look underneath

@edwardnash7411 2 ай бұрын

@@fubarmodelyard1392 Well for a kid it would look nice right out of the box

@fubarmodelyard1392 2 ай бұрын

@@edwardnash7411 that's what I meant. When I started this hobby in the 60's I was excited to build anything. But nearly 60 years later accuracy matters to me. I'm not one of those guys who tells others how to build their kits. I really don't care, just build something

@MuscleCarModeler 2 ай бұрын

I am signing off as one who has been honored to be by your side and learned about the love of styrene and muscle. Maybe, just maybe we will have our dream car in heaven. Peace, and here is for the smell of rubber. Love!!!

@CaptSpeirsB744 3 ай бұрын

I'm dyin' to see how this turns out. I'm holding off building mine for now.

@carlosdebaca5641 3 ай бұрын

Nice build!

@fubarmodelyard1392 3 ай бұрын

Thanks. Someday I'll get the decals I need for it

@GrandNational66 3 ай бұрын

Hello kitty😺

@quattro4s 3 ай бұрын

There is a moto among modelists that Esci's 1/48 was a magnification of the excellent 1/72 scale

@alangri2000 5 ай бұрын

Excellent work swapping out the Duster chassis! I plan to do this on mine also and seeing your work helps a lot! Thank you! Two things I noticed on the body of mine are the weak body lines on the rear quarter panels especially on the drivers side and the silly looking ridge in the center of the hood. Demons and Darts only had two ridges on the hood and only a very small crease in the center that was barely noticeable. Please research this and comment on it in your next video on this project!

@fubarmodelyard1392 5 ай бұрын

I did look into it and the demon did have a center ridge. Not as pronounced as the dart sport hood but it's there. I see what you're saying about the side crease. It kinda fades between the door and wheelhouse but is stronger after the wheelhouse. Not a dealbreaker though

@scooterdoughmas3012 5 ай бұрын

want to put a 440 six pack in my twister special🧡😋

@fubarmodelyard1392 5 ай бұрын

I there's room without it looking unrealistic go for it

@scooterdoughmas3012 5 ай бұрын

great vid almost want to do a 3 kit bash w/a Sox & Martin 😁🤩scooter😎

@fubarmodelyard1392 5 ай бұрын

I say do it.

@charlie418791 5 ай бұрын

Those decals are nuts ! Don't be blamin those innocent little cats... No doubt you'll get it sorted.

@fubarmodelyard1392 5 ай бұрын

Innocent? If you could only see my space

@HobbyLinkInternational 6 ай бұрын

The sign always rules! Sorry about the decals and gear :( I am sure you will get her done.

@fubarmodelyard1392 5 ай бұрын

Thanks brother. One day

@michaelhintzmikesminiature1812 6 ай бұрын

Bummer on those decals Benny. Hope you figure something out. I'll be watching

@fubarmodelyard1392 5 ай бұрын

Thanks Mike. Will try painting over decals

@alwoodsmodellingmayhem 6 ай бұрын

Aw man Benny. Saw the decal issue as soon as you saud therevis a problem!!! This kit is really fighting you brother.😮😮👍😉

@fubarmodelyard1392 5 ай бұрын

Yes it is Al. I'll get it sorted out

@ChrisK-LTC 6 ай бұрын

Well that sucks, but you'll get it fixed. Perfect amount of sign time too.

@fubarmodelyard1392 5 ай бұрын

Thanks brother

@ModelCarMinion 6 ай бұрын

The sign says it all. 😄

@fubarmodelyard1392 5 ай бұрын

So right Steve

@ramblers69 6 ай бұрын

That's so strange Benny, someone dropped the ball, I know you will get it sorted out, 😎👍

@fubarmodelyard1392 5 ай бұрын

Thanks Tom. I should get it touch with furball and point that out

@seamybmw 6 ай бұрын

Unlucky Benny sorry to hear the decals don't want to play ball but no doubt you will sort it out 👍👍

@fubarmodelyard1392 5 ай бұрын

Thanks for the vote of confidence Seamus

@MadGeniusProductions_MGP 6 ай бұрын

LOL just the perfect amount of sign time hahaha. Sorry about the decals and gear man but in the end I know it will look awesome.

@fubarmodelyard1392 5 ай бұрын

😂 thanks Joe. Not sure about awesome but I'll settle for finished

@TaurusMoon-hu3pd 6 ай бұрын

The sign🤣

@fubarmodelyard1392 5 ай бұрын

😂

@dustymojave 6 ай бұрын

I'm using a 71 Duster to build an MPC 69 Barracuda as an SCCA A/Sedan road racer. If I get a Demon, it will also get a Duster chassis. I AM building a Duster. Might use a Duster chassis under an original Hemi Under Glass bodyshell. The chassis for that got wasted in an earthquake in 1971. I could never bring myself to put a crappy 69 Barracuda chassis under it. PS: I wish Round 2 AMT would pack their 66 Mustang coupe and 2+2 and Falcon kits with the chassis, engine, engine bay from the 67 Mustang kits.

@fubarmodelyard1392 5 ай бұрын

I have that mpc 69 barracuda. Quite a disappointing kit. The duster saves the day again. Looking forward to the race car turnout

@charlie418791 6 ай бұрын

Can't believe I heard ya say not bad for MPC....A sad day. Hug Kyle for me.

@fubarmodelyard1392 6 ай бұрын

Ha. While it's still an mpc lacking in accuracy it fits together surprisingly well. Clear lights and separated glass is kinda shocking. If you don't open the hood or look underneath it's adequate for a shelf. But the hood scoops and rear wing screams mpc

@michaelcooke2559 7 ай бұрын

I had planned using the Duster kit when I build a Demon based upon the first review I saw of the Demon kit. The chassis of the Demon just sucks. No other way to describe it. You make some good points on building a Demon with a Duster kit. Thanks for sharing.

@fubarmodelyard1392 6 ай бұрын

Thanks Mike. You are right about the floorpan. It's lackluster from front to back and pretty much the same as the volare road runner, even the rear axle. I suspect duster sales went up when we finally got the demon

@EdsAttentionToDetail 7 ай бұрын

Seeing these two kits side by side reminds me of an A+ student and a C- minus student at graduation. They both get the job done but one was obviously way ahead of the other. Great video!!

@fubarmodelyard1392 7 ай бұрын

Thanks Ed. That's a good analogy between a good kit and so so kit. Put them together though and get something great

@DutchDaveModels 7 ай бұрын

Nice little Egg hornet 💥👍💥

@fubarmodelyard1392 7 ай бұрын

Thanks Dave

@thebeardedguyjefflawless5887 7 ай бұрын

New subscriber here Benny........looking forward to seeing more of your videos

@fubarmodelyard1392 7 ай бұрын

Thanks Jeff. Subbed back

@THROTTLEPOWER 7 ай бұрын

Looking good Benny! 🤜🤛

@fubarmodelyard1392 7 ай бұрын

Thanks Tim

@THROTTLEPOWER 7 ай бұрын

@@fubarmodelyard1392 Anytime my friend

@ericstayer4237 7 ай бұрын

Benny ... what do ya think about ...The Fuzz Duster kit , to pick through , it has some weird stuff in it ... I don't wanna pick through my 340 duster either . Love your videos .. im the guy in Detroit ya sent The Talledga kit to , for almost winning your contest , a while back . Howdy from Southwest Detroit

@fubarmodelyard1392 7 ай бұрын

Hey Eric. You jarred my memory with that Talladega kit. I think that kit is pretty much the same as the 80 road runner with some extra parts in it. The floorplan isn't any better and the front suspension is totally different. The aspen/volare had transverse torsion bars. Would be interesting to see how you build the demon with volare parts

@lancerevell5979 7 ай бұрын

Good video! I appreciate the ideas on the conversion. I have already done the 71 Demon, 76 Dart Sport and three Dusters. So I just ordered the 71 Duster and 71 Demon again, to try this conversion. 😎👍

@fubarmodelyard1392 7 ай бұрын

Thanks. You have a nice collection of A bodies there. I've seen that dart for years and for some reason I never picked it up. Now's a good time to get one. The stock 340 duster makes a great donor kit if you want the demon to be a factory car

@williwass6837 7 ай бұрын

For me it was a big settback that they didnt put the duster chassis ans engine bay into the Demon Kit!i guess they want to sell more Dusters!😉Just have the same kits for modding them together on my workbench!BTW the reason why the Duster is such a good kit is it was designed under the hands of RC2!In this time "AMT" put out a couple of very good new kits!Like round 2 is doing it with the 21 Charger,the Bronco and a couple others!But their "new tools" of old kits are leaving a couple of things to the wishlist!And btw,the Duster is not a pro street,its a street machine!😊

@fubarmodelyard1392 7 ай бұрын

It wouldn't be an mpc if it had more realistic parts now would it. As for the duster I'm using it says pro street duster right on the box. Not that it really matters

@williwass6837 7 ай бұрын

@@fubarmodelyard1392 Ah!I have the same Duster kit with the same engine and rims and its the AMT/ERTL 8334 and it has written Street Machine on it!😂And yeah youre right about MPC🙃

@robs4516 7 ай бұрын

Maybe they'll put out a version with front suspension/steering in another 50 years. I'll have to be sure I'm still around.

@fubarmodelyard1392 7 ай бұрын

Maybe by then amt will tool one up

@CarsandCats 7 ай бұрын

I hear a kitten!

@fubarmodelyard1392 7 ай бұрын

There's 5 three weeks old and ready to get out of the box

@CarsandCats 7 ай бұрын

I've got an AMT '71 Duster I am building. I took the engine and tires out of a Top Fuel dragster kit and am building a Pro Mod.

@fubarmodelyard1392 7 ай бұрын

Cool. I'll check it out

@goforitpainting 7 ай бұрын

Have a great build.

@fubarmodelyard1392 7 ай бұрын

Hope so. Thanks

@MrBillyVega 7 ай бұрын

I am planning on the same project in the future , Thanks for the tips ! I have the stock Duster rather than the street machine version . Maybe I am wrong , but did'nt the street machine version have a V-10 Viper motor ? the exhaust ports looked correct bit it looks like it has 10 rocker arms in the head . 2 valves per cylinder x 5 cylinders each side .

@fubarmodelyard1392 7 ай бұрын

I'll have to count the rockers. But there's indents for only 4 spark plugs

@fubarmodelyard1392 7 ай бұрын

It's a good thing there's valve covers because I counted 11 rockers. On each side. 4 exhaust and 7 intake. Since the exhaust manifolds are 4 hole early 340 and there's an indent for 4 spark plugs, and the transmission resembles an A-833 I'm calling it a 340

@williamwagaman9538 7 ай бұрын

If you know everything about mo P a r s. Then you would know that this K I t was molded in 1970 While you're duster, it was molded in 1995 definitely a difference in parts. Round tround two is being cheaWhile you're duster, it was molded in 1995 definitely a difference in parts. Round TWO is. Being Cheap as normal?What they did there was take the last Issue d a r t model and Fit a new T 00 l d body on The older Mold. Nice job converting the Body onto the newer platform

@fubarmodelyard1392 7 ай бұрын

Never implied I know everything about Chryslers. Thanks for the encouragement

@williwass6837 7 ай бұрын

That isnt completely right!And it doesnt have anything to do with that they could have udsed the Duster parts for the Demon!there would have been only minor changes to the chassis pan and the engine bay to fit!For me they were lazy!

@williamwagaman9538 7 ай бұрын

Why do we have to look at the sign that is B u l l

@fubarmodelyard1392 7 ай бұрын

Turn away or jump forward

@thescalemodelcarguychannel8681 7 ай бұрын

Cool kit Benny ❤😊

@fubarmodelyard1392 7 ай бұрын

Thanks brother

@stephendoing2253 7 ай бұрын

Thanks for the tips!

@fubarmodelyard1392 7 ай бұрын

Anytime Stephen

@MoonwalkerModels 7 ай бұрын

Looks like Round2 didn't correct much on the Demon. What a shame. I also was patiently waiting for this kit.

@fubarmodelyard1392 7 ай бұрын

Don't let the minor bugs stop you from getting one. They really did improve the kit

@williwass6837 7 ай бұрын

Oh they did a couple of great changes that makes the kits much better then the original!get one its great,except.......😉

@ChrisK-LTC 7 ай бұрын

some good bashing going on there Benny

@fubarmodelyard1392 7 ай бұрын

Thanks Chris

Ең жақсы KZbin

Пікірлер