Nice review, of the handbrake, did you tried the blue spring later?
@vandrayketv131625 күн бұрын
Why the hell does it cost so much! That is crazy! Shit shit probably costed them 40$ at most to be made
@matt16959 сағат бұрын
The custom hardware with micro adjustments makes this stand cost more than most. The quality of powder coat, branded end caps, carefully packaging, are all superior to other 8020 products out there as well.
@dealscaleАй бұрын
I dont like the fact that it flexes up and doen when you mount and unmount the monitor
@bendy1990Ай бұрын
Thanks for the tips. I went and used the website, walked into a junkyard with a stock # and walked out with a 75$ seat in 10 minutes. I plan on installing it this weekend. I got me a 2012 Genesis "Katskinz" seat in all black leather from a car with under 20k miles. Absolutely comfortable and its a passenger seat in brand new condition...I was told that u can use a small drillbit then bigger to remove those brackets, gona try that first to see how that part goes then angle grinder away is a great idea.
@user-qj4um2wj6iАй бұрын
I just bought one here in Australia its great I have the fanatec csl dd I just ran the usb cable into the pc very happy with it, thanks for the review.
@PR1NCETD0TАй бұрын
are the pedals better than sim jack pro's?
@bandix667Ай бұрын
I Have triple 55... Any options?
@JustinTuchek2 ай бұрын
Really great tool. I had spent hours digging through eBay listings and found what I was looking for in just a few minutes Also the listings on Car-Part looked to be cheaper than re-listings on other sites. There also appears to be a number of re-sellers who are simply drop shipping from the original seller as they've posted their watermarked images - which kinda sucks because it makes it appear like there are way more options than there actually are
@-ampm-2 ай бұрын
I'm looking at the same thing with the same size monitors, how much room does that take up?
@thelazyduck93702 ай бұрын
Well not everyone casually has gear to cut metal just lying around, so that would offset some of the savings you might make from buying a used seat if you have to buy that gear
@ArrowSu3 ай бұрын
Very good video.How high is this pedals?
@paulneskow35043 ай бұрын
Bought the La Prima bundle, but have already swapped out the original pedals for the Invicta stuff. I like that a lot more. Just swapped out the La Prima hub for the Forte hub - gave me a little more torque (not really needed) and more outlets in the back. Same size as La Prima. Asetech says it will be upgrading hubs, but apparently that's down the road a piece.
@Motowagon543 ай бұрын
Any chance you have the measurement for the central horizontal beam in the event I ran this with a single monitor at first? Is it 48”?
@johnbaillargeon70373 ай бұрын
Subbed good stuff
@jean-francoislegault72894 ай бұрын
I just cant decide between these and the heusinkveld ultimate.
@gwenndolynnmecklenburg64574 ай бұрын
thank you, bought it thanks to your review 🥰
@MikaTarkela4 ай бұрын
I'm currently using the Fanatec CSL Elite V2 Pedals. Is there any other set of a throttle+brake that I should consider or should I just go with the Asetek Invicta? I'm using their wheelbase and it's amazing!
@klosenuf4 ай бұрын
Such a bummer that Microcenter is nuking their Asetek stock and seem to be done carrying them. I've got the bundle and think it's great for the cost. Good Vid!
@Andrew-dj1wd4 ай бұрын
How do you know if a car seat would fit on a Sim Rig? Do the bottom of car seats have a standard frame size?
@reviewforthetube64854 ай бұрын
I can actually hear the rumbling coming out of the base. Also do you have a little coil whine when turning heavy? Also don't you love that center torque feeling? It makes you feel sttatched to the car. That weight helps so much telling us the limit of grip because that torque stays strong until the tires give a little bit. This is also why I like more powerful wheels! I feel more connected and I feel like I am throwing a car around. People go oh that much torque isn't realistic. No it's not meant to be. A real car doesn't feel like ffb does but us as sim racers need that power and that detail because that's how sim racers get the information needed! When I went to a 12 to 15nm dd wheel I realized why drivers like more torque even if you set it lower the power from the motor is still there and the details pop off more. But you want that center force feel it allows you to be more precise with every movement and allows you to feel every slight give in the wheel like tires slipping or when you are getting understeer etc. It also I swear helps you not get understeer often. I feel like im turning less now and getting more cornering out of the car.
@reviewforthetube64854 ай бұрын
I'm still shocked at how the community gets onto every other brand about it's plastic feel yet don't with asetek? Listen I get that it feels good the ffb but that should not excuse all of the plastic for the price. I will say this deal is insanely good but now prices and deals like this dont come across snd they seem to be raising prices.
@mikri884 ай бұрын
is it quieter than the h pattern in 3rd and 4th?
@HeroicScaleGamers4 ай бұрын
I got a GTI seat for my wood rig and its full manual even the lumber. Can sit and race for days.
@marcushillerstrom255 ай бұрын
Nice review! I’m waiting for this to be back in stock
@johnwalshaw5 ай бұрын
Quick question. Are you using an AMD or nVidia GPU with your triple Neo G7? I just switched from an RX 6700 XT to an RTX 4070 Super and was limited to two screens Neo G7 only. The solution was to disable Game Mode in the on-screen display menu for all three Neo G7. That will then limit the screens to 120Hz and no VRR but does solve the two screen limitation.
@derekbond95135 ай бұрын
Love the Invicta S-Series. Can I add the clutch to the S series?
@skyjunior2335 ай бұрын
I literally bought this pedals from micro center for $435
@JayKBra5 ай бұрын
Same. I paid what he did originally but picked up the price difference yesterday when I picked up another Simucube bundle.
@skyjunior2334 ай бұрын
@@JayKBra what simucube bundle did you pick up? I have the SC2 Sport and the GSI X29
@mciarlillo13095 ай бұрын
The wheel base is $399.99, the wheel is $159.99, and the pedals are $127.99 right now but stock is super limited. I’ll be picking up the wheel base tomorrow and I hope I can track down the wheel. I already have the pedal set thankfully.
@matthewb98565 ай бұрын
Are you able to swap the rims like with their other button boxes? I like the buttons on this but want to race with a d-shape or round wheel
@RedlineSimRacing5 ай бұрын
You can't change the rim on the TK F1 rim. The rim and hub are connected. The trade off is price. Separately it's only $200 at microcenter vs the 400 on the button box and 100 on the rim
@paulyskidda3875 ай бұрын
What a deal. I have the TK bundle too. I’m happy with everything,but may do the throttle upgrade soon
@RedlineSimRacing5 ай бұрын
Was a crazy deal. I hope Microcenter keeps stocking Asetek.
@user-ik5kv3fd8k5 ай бұрын
Sir why not combine the desk with your rig way more room 1 less screen 1 less chair everything be more tidy plus your keyboard tray can go in and out
@RedlineSimRacing5 ай бұрын
I don't want to use three 43 inch monitors as my main productivity setup. I still work 8 hours plus from my main desk and prefer having the racing rig separate.
@user-ik5kv3fd8k5 ай бұрын
@@RedlineSimRacing sounds logical cuntinue on doing you sir !
@user-zo5dr6qh9t6 ай бұрын
Hello, how did you align the screens? I have the problem that the housing of the Samsung Odyssey G70 screens prevents it from laying flush in the lower area, and with bezel free kits it becomes even more difficult. i have simlab Tripple Monitor Stand with Vario Vesa and 3X Odyssey G70 43"
@RedlineSimRacing5 ай бұрын
It's not perfectly flush because that part sticks out, so I set the front screen to overlap the side slightly. I don't notice is when racing.
@roquemattos82576 ай бұрын
congratulations, very nice! those tvs are 4k? with the 4090 run smoothly?
@RedlineSimRacing5 ай бұрын
They are 4K and I still generally get 100 to 150 FPS on most games. Assetto Corsa isn't the most demanding.
@CrusaderFan6 ай бұрын
Nanometer lol
@RedlineSimRacing5 ай бұрын
I corrected that in another comment. Not sure why I didn't say Newton meter. I use my Torque wrenches in the garage every week. lol.
@user-tq5gg2kx3n6 ай бұрын
Aaaahm
@redthewannabe4236 ай бұрын
Things get *super* compact when you run VR, I'm set up in the corner of a standard sized dorm room no problem.
@RedlineSimRacing5 ай бұрын
I have a VR headset as well. I use it sometimes. But I prefer screens.
@xamazingtrace6 ай бұрын
I am headed out to buy this on Friday. How do you like it so far? I am also coming from a normal wheel. I have Logitech 920 currently
@RedlineSimRacing5 ай бұрын
Love it. Hope you are liking it.
@xamazingtrace5 ай бұрын
There's just no comparison! The quality of this system is so far above what I paid for it! I feel bad for our friends across the pond if they don't have a Micro Center....@@RedlineSimRacing
@redarrow_126 ай бұрын
Thanks Simlab Triple montior mount way to go Birthday coming know what i want now nice vid keep up the Good Work.
@johnwalshaw6 ай бұрын
I instantly recognized the monitor from the back view (43" flat Neo G7). I am using the identical screens. I blogged a detailed calibration walkthrough. Let me know if you are interested and can reply with the WordPress link.
@damiengvideos43376 ай бұрын
which monitors are those?
@johnwalshaw6 ай бұрын
Samsung 43" flat Neo G7. They are super light also.
@RedlineSimRacing6 ай бұрын
This. They are often available for $499.
@regibson236 ай бұрын
I have this monitor mount. It's fantastic and the same price or cheaper than every other mount except this one has the vario vesa mounts. And it's big enough to easily fit 43" monitors or 34" ultrawide. The only thing I don't like is the sides of the vertical supports don't have t-slots. Sim Lab is going in a function follows form direction as of a sim rig can ever be attractive.
@RedlineSimRacing5 ай бұрын
That bothers me too. At some point I might by my own aluminum extrusion and swap it out.
@zincprepa4 ай бұрын
I don't have that mount yet, but I believe looking at it, you should be able to rotate the vertical sides 180 degree if you want to mount a keyboard tray for example.
@paulneskow3504Ай бұрын
@@regibson23 I believe one reason there are no vertical t-slots is that the mount is adjustable in the tilt direction. That would make mounting vertical t-slots “difficult”, but as it stands, you can adjust the individual tilt of each monitor. I found that useful in getting my triples to hang together correctly.
@regibson2324 күн бұрын
@@paulneskow3504 I'm talking about the profile. Not the mount.
@paulneskow350424 күн бұрын
@@regibson23 Ah. I misunderstood. I think they were going for a look rather than a function. As for your problem, if you turned the uprights (?that is what you're talking about, right) 180 degrees, the smooth side would be inside and the channel would be outside.
@fearless47206 ай бұрын
how much did that whole setup cost you roughly?
@RedlineSimRacing6 ай бұрын
Without the PC around $4300 Seat $150 Cockpit $900 during black Friday Asetek Package from Microcenter $800 Sim Labs Monitor Stand $450 Samsung G7 Monitors with an EDU discount $500 x3 Then I also bought the Asetek Forte Hub and leather rim so that was roughly another $500.
@Drift-Daddy6 ай бұрын
Love the setup. Just moved into my first house where I have a dedicated office/room for my rig and you've given me some inspiration on some steps to take. I like the triple screens and the rig at an angle in the corner like that. Seems like the best use of the space.
@RedlineSimRacing5 ай бұрын
It works out really well. I had it in the main part of the basement. But the kids always wanted to crawl all over it and I didn't trust my dogs to not eat a cable or something. So I moved it to the office.
@blacknovella6 ай бұрын
its hilarious to me that we have all dumped the same amount of money into sim and real life motorsport. about to buy a 718 gt4 for myself
@M_ALGHANIM6 ай бұрын
thank you that was very helpful
@M_ALGHANIM6 ай бұрын
nice setup my friend and I'm waiting part 2 to see how did you mount the seat because I'm planning to get same seat on my trak racer tr80 and I'm little confused how i will mount it
@RedlineSimRacing6 ай бұрын
Ask and you shall receive. Just posted. kzbin.info/www/bejne/jKurg55no65oo8k
@paulneskow35046 ай бұрын
?Where can I get those mounts. MY Micro Center doesn't seem to carry them, and I can find no Vario mounts anywhere. Help!
@RedlineSimRacing6 ай бұрын
Just added the links to the description to get direct from Sim Labs.
@cgrf456 ай бұрын
A few days ago it was at $400
@RedlineSimRacing6 ай бұрын
The base? Crazy value at that price!
@cgrf456 ай бұрын
@@RedlineSimRacing no the entire kit. It was a flash sale.
@RedlineSimRacing6 ай бұрын
@cgrf45 holy crap. Yeah a few months ago they did that too. Crazy at thay peoce.
@RedlineSimRacing6 ай бұрын
@cgrf45 holy crap. Yeah a few months ago they did that too. Crazy at thay price.
@VASGOT886 ай бұрын
It was 309.99$ when I got it.
@autofficinaportafortuna6 ай бұрын
Newton meter (Nm) is for torque. Nanometer (nm) is used in measuring distance. They're not the same.
@RedlineSimRacing6 ай бұрын
Yeah, not sure what I said nanometer. Knew it was Newton from using torque wrench's almost weekly.
@Cereal_Killr6 ай бұрын
Im looking into adding 2 27" OLED monitors on the side in vertical to my 48" OLED to save space in my situation... Size lineup is actually spot on. I think it's gonna be a game changer