Where the hell do ppl get the money for all these mods I wanna do all these to mine but I’m tired of waiting pay check to pay check
@JasonNguyen5 күн бұрын
I agree! Haha For myself, I just work hard and set whatever I can aside for whatever I want. I usually find the best deals. Everything on my car isn’t all brand new and retail price. For my buddy’s supercharged IS in this video, well, he’s a nurse haha, so he’s definitely in a different tax bracket compared to me😅😩 Also, we got all these mods pre Covid. Everything is insanely expensive now.
@Gubchee7364 күн бұрын
@ I appreciate the response and yea totally I guess it’s just about budgeting. I had an Infiniti G37 that I traded in for a Lexus RC 350 definitely not cheap that’s for sure got it for a good price tho but the mods for it are a pretty penny. But I really hope I can be as successful as you are and a build that’s just as clean. But thanks again for some of the advice!
@SonnyD958 күн бұрын
i think you needed to cut a triangle in the corners to make look better
@JasonNguyen7 күн бұрын
I found that out from a few subscribers after the fact😭 EZ Lip was kind enough to send me out another one though! So I’m gonna do that for my next lip when this one fails😅
@rsync94908 күн бұрын
The shade.
@JasonNguyen8 күн бұрын
Thanks for watching!
@adammiller1618 күн бұрын
Just installed these and have a similar gap under the middle light bar. Have you had any issues with water getting in there on yours?
@JasonNguyen8 күн бұрын
Nope! I haven’t had any issues with water! If you feel skeptical, I’m sure there are some weatherstripping pieces that can be fit in there!
@chadwickwicky678 күн бұрын
Nice! Does the center reflector come only on certain models or years? I notice some just have the side tails but no middle. Can the center part be added?
@JasonNguyen8 күн бұрын
Yes! I believe it’s 1990+. I’m sure it can be added! I don’t know if you need to swap the sides as well. I have a 1990 so they already came with the facelift tail lights. I just upgraded them to the JDM cherries
@kuya_art9 күн бұрын
Chronicles on KZbin gave you props on your Lexus 🤙🏽
@JasonNguyen8 күн бұрын
Oh what! Thats so dope! I’ll have to check that out! 🤘🏽
@BernsteinOmega9 күн бұрын
Saw this car on 'The Chronicles' KZbin channel and had to find this ES! Subscribed! Car is dope!
@JasonNguyen8 күн бұрын
Thank you so much! I really appreciate that!!🫶🏼🥺
@ClintonFerguson-yg8ui11 күн бұрын
Where did you get the wing from ?
@JasonNguyen10 күн бұрын
It was from my buddy’s Subaru STI! I believe it was an APR GT wing
@justinfranco710712 күн бұрын
I went thru all the same steps on $1000 Hella headlights for my VW GTI mk3, my Lexus gs400, and my B13 SE-R. Most headlight housings are like this, some you can take apart my putting them in the oven and slowly heat em up till the glue melts and the housings come apart. When you do that peel off all the old glue while you can. Some headlights have internal ballast or auto leveling systems so be really careful and closely study the headlight and its features. When you cut housings you are taking off material (shavings) so when you reassemble them they don't fit together perfectly so sometimes it's better to crack them open like an egg. But the method in your video was smart, never tried that. I'm assuming it's a soldering iron with a chisel blade.... Great video man thank you
@JasonNguyen12 күн бұрын
These are all great points!!! Thank you so much for watching dude!!! I hope you enjoyed it 🙏🏾
@cook699413 күн бұрын
Where can i get the intake
@JasonNguyen13 күн бұрын
It’s the RR Racing Supercharger Kit!
@davidpineda64514 күн бұрын
bro just buy from a dealership next time. I actually know of people who do this all the time. So many resellers are scamming on craigslist. Just be careful
@JasonNguyen14 күн бұрын
I agree! That’s the plan forsure. I’ve only ever really bought from a Dealership when it comes to cars that are $10k+. You live and you learn😔 Thank you so much for watching! I really appreciate it!
@davidpineda64514 күн бұрын
@ Yeah. Because of you i got an IS. I love mine. 6k for a 250. And ima lower it and put some LS460 wheels on them. i got for $300. Some new tires and maintenance. Everything in total registration and mods/ maintenance will be 8.5k
@dk3fiddy14 күн бұрын
That looks real good, man! Nice work! 💪🏾
@JasonNguyen14 күн бұрын
Thank you so much bro! I appreciate you!🫶🏼
@dk3fiddy13 күн бұрын
@ You’re welcome!
@Mon3tezjsjsjsjsj14 күн бұрын
What camera do you use bro ?
@JasonNguyen14 күн бұрын
I use my iPhone 13 Pro paired with a Jobi GorillaPod Gimbal & a Rode Microphone!
@Marinedevildawg14 күн бұрын
Jason, bro. What's up? Another dope video banger. Nice bumper ez lip custom front lip. It actually looks pretty good. Really a big difference. You really nailed it. Keep grinding hard, bro. And remember that it is always better to look good than to feel good, Oooaaahh. Peace ✌️ out brah.
@JasonNguyen14 күн бұрын
Thank you so much, brotha! I’d don’t know if it would work or look good but here we are! It ain’t too shabby! You’re the best for always watching when you can, dude! 🫶🏼
@davidboyce642715 күн бұрын
You being in Kali I’m surprised you didn’t chec out PARADOX THE WRAPPER KZbin channel. He’s got tips on tools to make wrapping technique a little easier like using hand held squeegees and tuck tools for crevices 👍. Nonetheless you always manage to do a good 😊 job 🫡
@kin6david15 күн бұрын
You're supposed to cut the inside of the lip in the corner in tiny triangles so that you don't have that corner weird bend
@JasonNguyen15 күн бұрын
Thank you! I just found that out from another subscriber! I’m gonna do that with my next one forsure!!
@SS-he8eg16 күн бұрын
what colors are your DTR lights? Shits tough
@JasonNguyen15 күн бұрын
They’re red! And thank you so much!!🙏🏾
@2slo4u16 күн бұрын
Looks good bro. When I heard Plasti Dip and 2k I was like "oh no that won't work!" so I'm glad you didn't go that route. 😅
@JasonNguyen15 күн бұрын
Thank you bro! I had to really think about it lmaoooo. I was like yeah, that’s a recipe for disaster lol
@OGCattdaddy16 күн бұрын
Video was great until your outro …… went from a good vibe to not so good vibe.. smh
@JasonNguyen15 күн бұрын
Sorry about that! Just wanted to express how I feel. Car shows just don’t tickle my fancy anymore, maybe I’m just getting old but I’ve always just loved building cars and driving them around. Thank you for watching though!!!
@82mjoseph16 күн бұрын
Got damn bro your daily looks soooooo good please please keep it clean JDM 💪🏾
@JasonNguyen15 күн бұрын
Thank you bro! I’ll try my best to keep it clean! I just have a few more things I wanna do to it cosmetically and I’ll be done!🙏🏾
@82mjoseph15 күн бұрын
@ ok imma stay tuned lol
@RobHTech16 күн бұрын
OMG. It's a garage door seal from Home DeepHole
@JasonNguyen15 күн бұрын
Sure looks like one! I was considering that too but then I saw the EZ lip and wanted to test it out!
@Shakattack4516 күн бұрын
bro ur car looks amazing, you have the best personality on youtube man i stg, Your vibez are immaculate
@JasonNguyen15 күн бұрын
Thank you so much, I appreciate you! 😩🙏🏾
@romeole4016 күн бұрын
Why dont wrap the lip in one piece man
@JasonNguyen16 күн бұрын
I didn’t want to waste that much material in terms of length just in case I need to rewrap something else on the car. I also think one piece wouldn’t have done as well on the rubber/foam lip
@RoderickTom-ge1vc16 күн бұрын
Looks Good Bro🔥
@JasonNguyen16 күн бұрын
Thank you so much bro!🔥
@vicsleezy16 күн бұрын
Wheres the supra??!!
@JasonNguyen16 күн бұрын
Still there rotting away😂
@hcy292516 күн бұрын
Not bad at all mate, actually pretty lit, I had it on my old mark x years ago, didn’t fit as well as yours, kept falling off around the edges
@JasonNguyen16 күн бұрын
Thanks so much man! It definitely took a lot of messing with! EZ lip sent me an extra one so when this one fails, I’m gonna try it again but with a relief cut on the corners! Some people gave me some advice for the next time around and it should help make it better!
@2NSTR16 күн бұрын
try black shoe polish or black interior paint
@JasonNguyen16 күн бұрын
That sounds like a good idea! Thank you for watching!!
@2NSTR16 күн бұрын
if you have stock screw/bolting points underneath just put some screws in so when you do scrape a kerb or whatever it doesnt rip it all off.
@JasonNguyen16 күн бұрын
Thank you! I don’t wanna drill into my lip/bumper so I don’t mind if it rips off! Ez lip sent me a new lip so when this one fails, I’m gonna try it again but with relief cuts on the corners as that was the advice I got from others!!!
@Moooner8616 күн бұрын
its not too bad, and for 50 hots?!
@JasonNguyen16 күн бұрын
Yessir! They sent me another one too and I’m gonna try to do relief cuts next time around when this one fails or rips off. And it’ll probably look even better!
@Moooner8616 күн бұрын
@@JasonNguyen Thats dope brotha! Also I wanted to ask if you wanted to ever cruise or make a vid with my 86 i'd be down to make some content with you cause I'm not too far from you I also live in the valley :D
@hofferjh16 күн бұрын
When you paint it first put Liz 4 or 5 coatings of the first paint you're gonna put on there and then put the clear coat on top So if it ever mess up again with that enough coating you can able pill off that paint that's what I did with my Batmobile And I found out if you do a first coat of paint on top of it first then let that paint dry and if it has some too much bubbles or too much orange pill You just sent it down as long as you don't get to that paint
@JasonNguyen16 күн бұрын
I know! I did like 4 coats for the rest piece and it would crack because the rubber from the lip stretches when you drag or pull it. Which would probably happen from steep driveways. The wrap is holding up way better than the paint would and it would be way easier to rewrap rather than prep to paint it again if it got messed up!
@its_1chain16 күн бұрын
I didn’t get a notification 😢 I’m late man FUC*!
@JasonNguyen16 күн бұрын
It’s all good bro!! Thank you for watching🫶🏼🫶🏼🫶🏼
@thepanther_white150216 күн бұрын
yakuza strikes again! looking good bro
@JasonNguyen16 күн бұрын
Thanks for watching man! Glad you like the new look 😎
@gaygaymanubay16 күн бұрын
CAR LOOKS SO SLAMMED
@hofferjh16 күн бұрын
When you put it on and you went round the curve did you cut a triangle out where the sticky part is👍💫💥💫❤️🔥💯😎
@JasonNguyen16 күн бұрын
OH SHIT I DIDNT EVEN THINK ABOUT THAT. Is that what people do?!?!?
@ivanamiro769616 күн бұрын
fun!!
@JasonNguyen16 күн бұрын
Thank you for coming bb!
@Kevin2718216 күн бұрын
Nice turned out well. I've actually wrapped rubber with some complex shapes and it's holding up just fine
@JasonNguyen16 күн бұрын
Thank you so much, kevin! And yeah, vinyl's surprisingly versatile!
@ivanamiro769616 күн бұрын
looks so good! and squishy lolol
@JasonNguyen16 күн бұрын
Thank you my love! Def a game changer haha
@jasonnguyentoo985716 күн бұрын
wow!
@JasonNguyen16 күн бұрын
🫶🏼🫶🏼🫶🏼
@ryanhoward284516 күн бұрын
wow that ended up being perfect
@JasonNguyen16 күн бұрын
Thank you dude!!!
@mentalltd790316 күн бұрын
🎉 🎉 🎉
@JasonNguyen16 күн бұрын
🫶🏼🫶🏼🫶🏼
@Deceiver124916 күн бұрын
damn, that came out straight fire my guy. keep it up!
@JasonNguyen16 күн бұрын
Thanks for watching dude, I'm stoked on how it turned out too! 🔥
@Cmfrs50316 күн бұрын
Actually doesn’t look half bad, it’s probably better than buying brand new lips all the time, would it have worked even better if u wrapped it before putting it on the car?
@JasonNguyen16 күн бұрын
Thank you! I agree! And I tried! The wrap wouldn’t really adhere. And I’m sure installing it with the wrap already on would’ve made it come off where as I’m just making the vinyl wrap adhere to the shape of the lip once it’s on the car! I remember I spoke to EZ lip and they said it was best to paint the lip once it has been applied to the vehicle.
@ifuinkyxifresih16 күн бұрын
I thought it looked dope before the wrap but it looks even better with the wrap!
@JasonNguyen16 күн бұрын
Thank you so so much!😭🙏🏾
@hechoenmex059317 күн бұрын
Lol the old man car! It looks pretty Badass. I hope it holds up
@JasonNguyen16 күн бұрын
Thank you so much bro! Been good so far!🙏🏾
@samupyndy17 күн бұрын
Looks absolutely baller 🥵🔥 I had 2 Ezlip's on my first car, the second one had a carbon fibre gloss finish. Not sure if they still make it but the ES250 wrapped lip came out purrrfectly
@JasonNguyen17 күн бұрын
Thank you so much, dude! These things aren’t that bad! I’m pretty stoked on how it came out!😭🙏🏾
@ellisbermudez686017 күн бұрын
It can't be that short your girl still with you😂😂
@JasonNguyen17 күн бұрын
😂😭
@ellisbermudez686017 күн бұрын
Are you need now a tiarra Grille
@JasonNguyen17 күн бұрын
😂😂😂
@ellisbermudez686017 күн бұрын
@JasonNguyen I think it would look really nice on your car💯 specially the light up one
@recklezztray932217 күн бұрын
James 5:14-15: "Is anyone among you sick? Let them call the elders of the church to pray over them and anoint them with oil in the name of the Lord. And the prayer offered in faith will make the sick person well; the Lord will raise them up. If they have sinned, they will be forgiven."
@JasonNguyen17 күн бұрын
Thank you so much for watching!🙏🏾
@ellisbermudez686017 күн бұрын
Why don't you put some lips on your lips so you look like a drag queen😂😂