Make and Remake

Пікірлер

@Tottorul 6 күн бұрын

make it a mouse. make it a bit smaller, have a thumb-sensor that notices when you grip it to activate the optical sensor underneat making it a mouse, while not gripping optical sensor deactivates so that rotational movement moving the mouse a little bit doesn't move the mouse!

@robertsmith199 7 күн бұрын

Fuck yeah for $ 3,000 ! Those HT 4100's are SMOOTH, even though lacking seemingly in power, but that's because of the relative weight of the car to be fair. It's a "cruising car" for sure ! I had an HT 4100 Eldo'. It was NICE !! Just be easy on it, put in the coolant tablets for the aluminum/cast iron debacle, and you're good to go !! If you can get over the turtle speed and torque factor, it really is Nice Luxury !!! I agree with the guy in the brown shirt lol ! ;-)

@bradlittlejohn6008 7 күн бұрын

Just got it up and running. Had to use zadig 2.9. 2.4 was not supported in windows 11 home. Motherboard MPG z790i Edge Wifi, cpu i9-13900ks, GIGABYTE GeForce RTX 3060 Gaming OC 12G (REV2.0) Graphics Card, xbox one kinnect model 1440. But, I am getting these very wide blue columns in the sand pit. Here is a picture of the sand pit with the problem: drive.google.com/file/d/135PzDVRNPbGazL4mq57gkGIRueFJEP3-/view?usp=sharing I only have a inch of sand right now. I ordered 200lbs. Maybe that will help. Also, what is the purpose of the foam board? How high off the sand should it be? Is it to calulate the height of the topology?

@mylezzpurhourr 23 күн бұрын

Moon roof is the best part the spoiler sunroof always has that sports car vibe I hate the in board air roofs no one knows that you’re even vibing lol

@mylezzpurhourr 23 күн бұрын

I managed to get a 2004 impala SS Indy!

@ArenaRat-xd8fu 27 күн бұрын

Ohio car with no rust underneath, i call bullshit

@MondayNightRAWsRKO2024-xk9ew 9 күн бұрын

I know lol. 😂

@DerKrampus-ou2ln Ай бұрын

As a tabletop gamer, this gives me... Ideas. Wonder if I could create a topographic "command holo table" with rigid terrain.

@Slayer_Habit Ай бұрын

Just picked up one of these for fifty bucks on Facebook! Perfect for my daughter's birthday coming up🎉❤

@robertandrews4631 2 ай бұрын

2024 $2800 150,000 miles kind of crazy you guys got yours for $800

@gregory129 2 ай бұрын

I have 2005 ls. I paid 5600. Very low miles. 91 year old neighbor, leg problems. Garage kept. Every option. I love it. So fast. So comfortable. I spent 12000. Redoing everything. Fuel lines , brake lines , .i love it.

@jamesstevens1972-q2v 3 ай бұрын

Jason - interesting design. I see you have never done any design or machining before. You have 3D printed it, but if you attached a shaft to the club, I bet it was awful to putt with as it would have been far to light - putter heads need to be 310-330 grams to be effective and that crappy resin you use is nowhere dense enough! Also, your hole for the shaft is wrong - shaft diameters are .370” or 9.4mm - so a 9.8mm hole will be like a willy in a bucket fit! So, you will need to machine this from metal - so which metal have you considered in your design to achieve the desired weight? It then comes to machining. How are you going you hold this part when you machine it? How are you going to cut the square corners in the pocket at the back of the club face? How long a cutter are you going to use to machine the 3 slots, so the cutter does not foul on the back of the club face? There are multiple other machining issues you have designed into this which would add massive cost to this job. Marks out of 10 - I will be generous and give you 3, but with your design skills I would not be employing you.

@Uncle.J.32 2 ай бұрын

Nice work trolling this guy......

@jamesstevens1972-q2v 2 ай бұрын

@@Uncle.J.32 Unless you tell him it is wrong he won't learn and will continue to make these mistakes.

@Uncle.J.32 2 ай бұрын

@@jamesstevens1972-q2v lol this is not a machining video, he clearly states that he is just challenging himself to make a putter that he can 3d print and you go off on a tangent that it’s all wrong to machining. I can go deeper into what you said and state that a 5 axis cnc can machine what he made just fine without changes. I would be happy to put this on my machine and prove you wrong

@GoldArtAI4K 2 ай бұрын

@@Uncle.J.32 so Uncle, with all your 5 axis experience please tell me how you would machine the square corners behind the face where the side beams join them. In the corner there are no radius so you can't even use a ball nose cutter, so what method would you use to cut the square corners without leaving a machine cutter radius? And if I wanted to be really awkward I would ask how you would machine the slots in the base which also end in square corners. The only way I know of achieving these forms as he has designed them is to use EDM with a solid electrode with the square form on it. Very expensive and another process. There is an engineering technique called "Design for manufacture" which looks at a job in the way I have and checks that the part can be made, and then in an efficient and cost effective way. Just so you know I am had a 5 year toolmaking apprenticeship, followed by time in a design office, and worked in medical, aerospace and nuclear industries on front line projects where my practical and technical experiences have given me a comprehensive exposure to multiple machining technologies and methods, and used a massive range of materials - some very "exotic". So I would really like to learn how to machine a 90deg by 90deg internal corner with a sharp corner (no radius as per the design) by using a 5 axis machine. Please enlighten me.

@estacaotech 3 ай бұрын

I got the 00' LX for me and its an awesome car, sadly here in Brazil all cars are hard to buy and maintain, for example the Civic costs 18.000 R$ (3.200$ ~) but imagine yourself paying 18k$ for a car that is more than 20 years old, its crazy.. If in the near future I move to canada I will be definitely buying one, also nice and funny review!

@MelvinMallari-o6q 3 ай бұрын

Yes I will buy it

@KumarVivek-c2r 3 ай бұрын

Hello everyone Can we integrate image on this application as a game…??? Anyone comment about this. Thanking you in advance.

@make_and_remake 3 ай бұрын

Yes you can. Here is the source code: github.com/thomwolf/Magic-Sand

@benhall8946 3 ай бұрын

Its really a toss up but i would probaly lean towards the ss but i would probaly be more likely to get a ticket in it lol😂😂😂

@SHASHISINGH-tt7by 3 ай бұрын

@make_and_remake I installed and made the model. After i start the program im able to define the ROI. After defining ROI, when i click auto calibration error msg shows "chessboard not found on trial" and also "chessboard could not be found moving chessboard closer to center" in fourth trial. Im also using windows 11. Is this the possible reason for the error.?? Anybody qho can help me out. Thanking you in advance

@make_and_remake 3 ай бұрын

It might be a windows 11 issue. I’ve never attempted to run the program using 11.

@SHASHISINGH-tt7by 3 ай бұрын

@make_and_remake Thank you so much for the suggestion. It worked. Just wanted to ask, Can we put our own image in games of magic sand. Thanking you in advance.

@make_and_remake 3 ай бұрын

Yes you can. Here is the source code: github.com/thomwolf/Magic-Sand

@SHASHISINGH-tt7by 3 ай бұрын

@@make_and_remake can you please send the procedure. In which folder we have to put the map, and how can we Open in magic sand software.? Appreciate your help , thank you in Advance.

@cbossplayz3555 4 ай бұрын

No wonder they only made thease for a couple years mine was so bad it was unusable

@Aaronius_Maximus 5 ай бұрын

Hi Jason, for some reason even after following all your steps when I run the Magic Sand app it says that Kinect sensor isn't recognized. I've tried this with 3 separate 1414 model sensors. I've also tried using these files both on Windows 7 and 10 and it seems to behave exactly the same no matter which drivers I'm installing. Any ideas? Thanks for your time!

@make_and_remake 5 ай бұрын

I know in the comments people have said the chipset on their motherboards cause conflicts. That is probably the issue. You may need to see which chipsets they were having issues with. My class has built this several times using various machines including MSI, surface pro and think pads.

@Aaronius_Maximus 5 ай бұрын

@@make_and_remake Gotcha, thanks again for your time!

@Aaronius_Maximus 5 ай бұрын

@@make_and_remake Hi sorry to bother you again, just wanted to let you know (and anyone else reading this) that on my Windows 10 machine the issue ended being my SDK version. When I installed version 1.8 the software started recognizing my 1414 model sensor. I was able to get everything else working too, cool stuff! Did you happen to create this in Unity?

@Vctrxll 5 ай бұрын

What is the height of the Kinect and the projector?

@make_and_remake 5 ай бұрын

This really depends on the protector being used. If a short throw projector is being used then the Kinect sits the same distance as the projector which is around 3 -4 feet above the sand table surface. If it’s a normal projector, the Kinect will still be around 3 -4 feet above, but the projector will be much further away

@Vctrxll 5 ай бұрын

What type of license does your program use? Is it possible to modify it?

@make_and_remake 5 ай бұрын

It’s open source so you can modify it for your needs.

@francogramatico9402 5 ай бұрын

1473 kinect version works for the project?

@make_and_remake 5 ай бұрын

I’m not sure beyond the 1414 model. I know other models will work but I do not the exact model numbers.

@pacolapala 5 ай бұрын

Dude in blue talking about ash trays “back then” while looking like he’s 45 😂😂😂😂😂

@botrahan9444 5 ай бұрын

love how you said comment if you have any problems but you dont help people solve the problems

@golf253 6 ай бұрын

If they are originally bald, with out the vinyl, they are very desirable.

@driver58001 6 ай бұрын

I can’t calibrate, the chessboard box didnot appear when i click automatically calibrate kinect & projector

@make_and_remake 6 ай бұрын

What does it say in the bottom right corner when you start the program?

@ericknoblauch9195 6 ай бұрын

I had a 2003 Impala LS, and a 2005 base model. I kept up on the maintenance. Both were serviced regularly and the factory maintenance schedule was followed. Both cars had transmission problems, and had to have a new transmission installed by 70,000 miles. Both had to have ABS Tractiion Control Modules replaced by 70,000 miles. Both had poorly designed rack and pinion steering gear leaks, and a steering rack would leak by 20,000 miles. Both had tires that would need replacing every 25,000 miles. I had both engines, and they had to have intake, and head gaskets replaced by 70,000 miles. Both cars were not reliable, and were money pits. Even when following the maintence schedule they still fell apart. The rack and pinion steering racks were poorly designed, and belonged in a smaller car. The engines were too powerful for the transmission to handle. The GM dealers service departments near me said the transmissions, and steering racks were regular service items, and replacements were necessary on these cars. GM could have done better on these 2000 through 2005 Impala's.

@jamierichards925 6 ай бұрын

and here i am still using the og idle level arm after 5 years no issues lol

@ronwinkles2601 6 ай бұрын

This is a great buy at $3000! All you need is a 1979 425 ci Cadillac engine or a 68, 69 or 1970 Oldsmobile 455 engine with 360 hp.

@r.aidenbach5667 6 ай бұрын

The 80's DeVille, Seville and Eldorado were the very best looking body's, but GM really hurt the line because of the piece of crap motor in them !

@r.aidenbach5667 6 ай бұрын

No Way ! Had the nightmare HT4100 under the hood.

@mmcc2852 7 ай бұрын

i love the ender 2 pro, having used cr 10 for 8 years, and used makerbot and other brands. the ender 2 pro rocks, i did bought it in mainland china for around 96usd (699RMB) with 1kg fillament included, i would gladly buy 6 of these over a CR10, certainly 10 of these over a prusa

@cesarflaminio619 7 ай бұрын

Gm v6 3.8 motor is a great engine

@moniquemiranda7289 8 ай бұрын

promo sm

@pce0 8 ай бұрын

so many unecessary steps...

@markpennington-r1f 8 ай бұрын

Tell me why it’s 12 am and I randomly come across this( me being a 2001 impala so owner in Ohio), but extremely true I did have a coolant elbow problem but so far the maintenance has been pretty easy

@fauxhugh380 8 ай бұрын

Watching this video in 2024 and he's calling $5k+ cars heaps 😢

@chrismclaughlin5184 8 ай бұрын

Yes. I’d buy for $15K

@TwohundredSeventy 8 ай бұрын

Nowadays it would cost 2k

@athomestrength1266 8 ай бұрын

SS, all day every day. I'm a jingling keys kind of guy too!

@tinyreelservicesinternatio575 8 ай бұрын

Thank you so much for this short and clear explanation! After trying several ways, videos (and SDKs), a lot of re-installing, ending up desperately reading about incompatible USB chipsets on some devices...it was indeed Kinect SDK 1.7, that helped me out here! :D Still some dlls missing, that the "Magic Sand" App was crying for. A new PC with Intel UHD chipset, running Windows 11 Pro, is now ready to run "Magic Sand". =)

@make_and_remake 8 ай бұрын

Glad it helped!

@ed4373 6 ай бұрын

Hi I'm having the same problem with missing DLL files how did you fix this?

@ed4373 6 ай бұрын

Nevermind you just search in your C drive for the files. I then ran into the problem another person lower did error ending in 7xb just had to make sure the graphics card drivers were installed

@ed4373 6 ай бұрын

Also ran into the Kinect constantly disconnecting and was solved by plugging the Kinect power adapter into another wall socket.

@TiukkaSalamikota 3 ай бұрын

@@ed4373 What graphics card you have? I get the same error with Nvidia m1000 quattro with newest drivers

@SmoothRJBeats 9 ай бұрын

How do you enable Crosshairs?

@brianstewart8936 9 ай бұрын

FYI, the supercharged 3.8 is just as reliable as the NA 3.8. Both are easy 200k to 300k and more capable without major maintenance. FE is not that different either. My 00 GTP supercharged averaged mid 20s and got around 32 on the hwy. the biggest difference is the gas grade which was a lot more palatable when there was only a 10 cent difference between grades. Also, synthetic oil is not required on the SC 3.8, but why would one not use synthetic on whatever they own? Back in 2029, even with the mileage difference, the much rarer, higher contented, more powerful, much better performance SS is easily the better buy for what you get.

@djsebioficial 9 ай бұрын

What kinect does work with this project the original 1414 or the 1473?

@make_and_remake 9 ай бұрын

1414

@georgehebb9806 9 ай бұрын

I already made my sand box 30x40. is there a way to make that work.

@make_and_remake 9 ай бұрын

It will work just the same. You just have to raise the projector height even further unless you are using a short throw.

@georgehebb9806 9 ай бұрын

will the Kinect still work and if so what is the max distance. I am making this for a non profit originations which I am donating it too. so all the advise would be greatly appreciated.

@make_and_remake 9 ай бұрын

It really depends on the distance from the sandbox. I would say 6-7 feet away max.

@kevinwong6588 9 ай бұрын

Scrambler is the effective successor to the extended length CJ-6, and the '04 Wrangler Unlimited being the CJ-8 successor.

@darylcleveland7856 9 ай бұрын

I’ll take the SS I like extra hp power and the styling over the LS. There both good cars both have good motors but the SS is just my preference

@FherraZ 9 ай бұрын

😂 this guy ranting about a $99 3D printer that actually prints great

@Cezarrior 9 ай бұрын

this thing clogged in the first hours for me, definitely don't recommend

@georgealex19 9 ай бұрын

Bro, it’s cheap, fast to assemble and does a decent job printing. It’s like you’re driving a bentley and are telling us bmw’s crap.

@erikaharrison5357 9 ай бұрын

Promo`SM 😏

Ең жақсы KZbin

Пікірлер