ROUGH BOULDERS DUMPED IN AN ALUMINUM TRAILER IS BAD ENOUGH!! MANY SMALL SHARP EDGES PLUS BOULDER WEIGHT WILL GREATLY REDUCE SLIDABILITY ON AN ALUMINUM FLOOR!!!
@charlesharris69663 күн бұрын
Oh shit is right😮. Damn😡!!!!
@doctorcountersteer658011 күн бұрын
Isn't that a "grain" trailer?
@myopinioncountsmost241913 күн бұрын
Frame less dump trailers are scary dangerous. Have witnessed one go over like that; not pretty.
@user-uz8vj5ih3i19 күн бұрын
The only way that this is the driver's fault is if he's the one that loaded it.
@user-uz8vj5ih3i19 күн бұрын
This is not the driver's fault.
@user-cj6ck2rr8y21 күн бұрын
Some ignorant people have to learn the hard way
@chadbobby21 күн бұрын
I’ll take “BAD IDEAS” for $1000 Alex…
@RalphParks-w4s23 күн бұрын
He didn't drop the air out of his bags either
@allday1323 күн бұрын
That’s one way to get them out. 😂
@mbailey1234123 күн бұрын
When the daughters boyfriend “borrows” the trailer 😂
@carlachambers377124 күн бұрын
Mid hinge trailer isn't made for this load.
@jameslumbley147625 күн бұрын
Just a tad overweight
@teamsix718525 күн бұрын
@@jameslumbley1476 It looks like it. But this is all Pumice stone…..
@jameslumbley147625 күн бұрын
@@teamsix7185 lol damn they just jammed that thing way too full / should’ve used a round bottom
@RunsHoes125 күн бұрын
Ray Charles could have seen that coming.
@CEDARMULCH64226 күн бұрын
Did he really think that this wasn't gonna happen!?
@andyreimers27 күн бұрын
Every end dump has been a side dump at least once.
@markb9241Ай бұрын
Got to be stupid Hutterites!
@MichaelBrown-qh3fqАй бұрын
He must have rocks in His head to put boulders like that into an aluminium body like that!! It's meant for sand and aggregate for God's sake! 🤨😒
@Curt-ge9gcАй бұрын
The easiest way to free up the Boulders in the Nose of the Trailer. Lower the Dump, then pull forward 50 feet or more. Then make a quick Reverse and hit the Brakes. Do it once or twice. Will prevent a Lay Over.
@lionellucero3744Ай бұрын
Wtf. I’ve wouldn’t load those rock hells no
@mcab74Ай бұрын
Rocks on a frameless. Wow!!! Never ever do this !!
@fredk.2001Ай бұрын
Part of the problem was the cover hoops, the big rocks got stuck on them. Should have removed those first.
@paulmarbach6802Ай бұрын
Aren't you supposed to deflate air bags while dumping?
@MillerFamilyFarmsАй бұрын
You can or can’t, but it’s safest too so that if you would blow a bag while in the air she’d stay upright
@RS-cb7nmАй бұрын
Someone is a dumbass for load rip on that trailer. Well the brakeway pin worked.
@brettadams6467Ай бұрын
WOW you rip rap in a aluminum end dump NOT MUCH EXPERIENCE.......LOOK WHAT I CAN DO 😂😂😂
@TheBmco99Ай бұрын
Do you think you had enough rock lol I normally put the big rocks on the bottom then they won’t jam up. If you put them on the top on your tailgate case it wouldn’t matter it was just too much so must’ve wanted to sell. That trailer pretty bad.
@Dannoo77Ай бұрын
Pulled end dump for 45 years,no issues,need plastic liner,no exceptions!
@MeanAzz_13Ай бұрын
Hey camera guy! Do you have any brains?????
@BB37OKАй бұрын
That's why i don't operate dump trailers.
@benjaminbrown688Ай бұрын
When not to hire a shit for brain company to do your runs for ya
@ThisManTriggeredMeАй бұрын
I realize this is from 8 years ago, but when are we going to learn how to hold a phone correctly? You could have gotten the entire scene in one shot without having to move if you just held the phone correctly
@michaeldunagan8268Ай бұрын
Destination F**ked! Ozzyman channel.
@teamsix7185Ай бұрын
🤣
@leevahal900Ай бұрын
Probably way overweight.Cylinder broke.
@leevahal900Ай бұрын
@@user-rs6ct7cc6y40 ft 6ft hiside loaded to the top ?His max legal weight is still 20 tons or so.Anthing over that will cause damage.Plus he is on level ground.He could have bumped it not gone higher ,Ill stick with overweight AND driver error.
@dutchchenoweth220Ай бұрын
Didnt deflate the airbags on the trailer
@JrsjunkremovalАй бұрын
Wrong trailer for the job. That rock is not meant to load on a spread axle. Needs both axles on the ground.
@richiemcgrath5159Ай бұрын
Rookie what the hell was that driver thinking?🤔
@teamsix7185Ай бұрын
Actually the driver has been hauling this pumice stone for almost 30 years. Doesn't make it right though.....
@mkb3580Ай бұрын
Not made for that
@Harold-m1zАй бұрын
The problem is they move and lock in during transportation, and should have never loaded that heavy on the front. Legal or not.
@teamsix7185Ай бұрын
Yes. As well this is pumice stone. So the stone tends to lock/weld itself together during the trip.
@Harold-m1zАй бұрын
@@teamsix7185wow, that's crazy, I have never heard of that rock before. When we do haul rocks we usually put a little sand or whatever to kinda protect the box and adds a little lube for the dump.
@carloscastianoАй бұрын
@Harold-m1z correct. I get super stressed when I show up to a site and they don't preload a drop cushion for loading / loose material to encourage big rock or concrete chunks at a much lower dump angle early in the cycle. But not always the answer. I would have aborted after I've reached 3er or 4th stage. Then try and find someone/ siteor with a loader or excavator to give it a quick stir. Steep hill roll back a little and jerk the breaks
@christianchavez1616Ай бұрын
That’s what they get 😅
@dougberry1011Ай бұрын
That is hardly a rock box. Not too smart.
@dylanwicklund8704Ай бұрын
So many wrongs
@merllhagard6799Ай бұрын
Won't believe it??? Dude, I don't even do this kind of work and even I could see that shit coming from a mile away. 😂
@dabd8175Ай бұрын
Do just use a side dump
@funnydog6680Ай бұрын
And why do you need immunity unless you're a criminal
@drdemo4380Ай бұрын
I’m boulders is not the issue. It’s dumping a trailer out with air bags inflated. You must dump air prior
@kelvinmann1058Ай бұрын
Might have been avoided if when the rocks began to move so did the truck. 🤷🏻♂️
@SlowRidnJАй бұрын
Idiot 😂
@sophiasocal68Ай бұрын
I'm a diesel mechanic and had to replace the main lifting hydraulic arm on a turned over dump truck. Had to cut the first stage connection with a torch to get it out. Truck was down 2 weeks to source the parts.