Have you tried drilling and tapping the holes instead of rivet nuts?

Hi dear I need postprocessor mastercam 828d lathe machine

I'm a CNC router newbie prepping for HDPE work. Can you explain what the various tools in your ATC are used for? I saw you mention you do roundover on a router table, so no roundover tool. What are the others? How many bits do you typically employ in processing a big run of cupholders or other HDPE items?

Can you explain the laminate trimmer part? Is that basically an underpowered handheld manual router you use for cutting through the onionskin? Or is it more of a full-sheet surfacing you're doing to the backside of the sheet?

Hello Do you have to set your spindle nose on the fixed point and then the tools on the same point? Thanks

I'm looking for a solution like this. I just wish it didn't have to slide to the front to swap out, it's only a matter of time before I drop a $3000 trolling motor in the river ...or worse. I'm sure the anchor holds great, but I would prefer it to be pulling against a permanent stop as well.

Can you share your F&S I’m interested in cutting 5052 in my machine when It arrives.

Thanks, very helpful, would be nice if you explain how to create a new tool and how is the procedure to choose a pocket

i have 828 as well except mine does not have the "in manual" key top right. cant get it to change tools.

Very long way of calling tools i work on the 828d everyday and i call tools in one short method and its by enetering tool number in the first menu of TSM enter speed and direction of rod Ration and it's best to use g54 not basic ref...but thats my opinion

Mike; Is just plain CLEVER !!!

Nice table Miller.

awesome. can you offer the rail in black? I love everything about it except the color lol.

Do you have any videos or pics of the dust shoe itself? I have a Biesse Rover CNC router with the same HSD spindle and want to make a custom dust shoe for it. My machine also has the "pot style" tool holders so the dust shoe would not have to be removed for a tool change. I also have a 5x10 Shop Sabre plasma table.

$70-$100 tho 👀 pricey for a small table

Curious about those tool holders are they off the shelf from somewhere?

What if our tool is deleted...how will i recover that settings...suppose, when i select tool no.5, magazine does not recognise the tool...how should i sort this out

How to set atc tool

Best filet table on the market.

did you use aluminum rivet nuts? Stainless steel? does it matter?

Don't know what spoilboard you're using, but i'm currently using 3mm 820kg/m3 MDF/HDF and it works miracles. I have a friend who's doing a lot of plastics and he switched to these sheets too. Doesn't need surfacing and the relative closed structure helps to keep a deeper vacuum when slotting. Thickness of these thing panels is very consistent too, so you can replace the spoilboard without the need for zeroing the spoilboard again. (unless you're after <0,05 accuracy in Z) In my experience the normal porous MDF tends to loose a lot of air when slotting. I must admit, I recognize the relieve of stress after your machine is allmost done. :) I normally do a -,1 to -.2 mm Z in the spoilboard, flip it and replace it when it's worn out. (the smaller slots are filled with the gasket when flipping it opver). I'm using a 280m3/hr vacuum pump of 7,5Kw for a 4,5m2 bed if that helps.

I make cup holders that could easily be added to the back of the table.

Just needs beer holders

Thanks sir for making such kind of video it very useful for us and also use our tool which is good for lead generation may be its useful to you-kzbin.info/www/bejne/imPKg6mPhp6getk

Good job

Nice pop

Hi, I am going to make my first cuts on the same material and still learning, do you have more details in your cutting specs? rpm, ipm, speed, and what type of cutter did you use? Thanks

Do you have a bracket for dowriggers the fit crestliner sure mount system?

Your project wasn't available using the Desktop version of the software, but I was inspired to make one! I think - for a beginner - it turned out well. Very nice project!

These look great, and seem to work great, too. Did you buy those or 3D print them yourself? Can you share the source or design?

Hey, thanks for the video. Whats the diameter and lead of the ballscrews ? Thanks again.

Looks like it may not have loaded all the way.

My phone ran out of memory just before the program ended.

Looking good sir. Glad everything is working out well for ya!! Make chips bud!!

You can see a ribbon of material in the video showing it made a full cut and the ribbon was left the end radius is less than full width except on the corners.

vry informative video! I need some measurements and I plan on going this route on my boat. I must say thanks to Facebook for getting me over here, I to want to use rivets to mount the rails

So you should be :) What is that rapid speed ? Servo's i'm guessing

I am in the process of buying an IS408 I'm trying to get a definitive answer on the height of the gantry I know the machine comes with an air cylinder to balance the spindle what is the overall height with the air cylinder on it and if you remove the air cylinder which they tell me ships loose what is the height of the gantry what is the highest point of the gantry that will not move up or down without the air cylinder Reason I'm asking I'm trying to get it through my door that is only 84 inches tall If I can simply hook the machine up to power and lower the gantry no big deal but from everything I can get from Shopsabre and the videos I see online I'm not so sure it will be that easy Super thanks for any info!! Nice table

i have this anchor locker and i love it, i take my wife and daughter fishing with me so i have to do alot of the "boating stuff" myselfe. thanks for a great product.

thats some very good size shrimps what type of crab was that.