Пікірлер
@OneDancinWolf
@OneDancinWolf 23 күн бұрын
Hey, thank you for making this video!!! Mine had the exact same problem and you showed how to soder the circuit board so well I was able to do myself too. Toyota charged me $100 just to look at my sunroof, then said it was my motor, then said it was going to cost 1400 to replace the motor w/service 🤯 crazy. Greatful man I really enjoy my little whip and I just paid it off! Thanks again!! 👍🏾💯
@davidvdg2850
@davidvdg2850 Ай бұрын
GREAT video! I have a 2012 tC TRD & love it (also w/ 80K miles). Question:Have you ever tapped into the map light or sunroof switch power to power up a dash cam? Thanks man
@Charlesmoon7
@Charlesmoon7 Жыл бұрын
The problem is in those clicks bottom inside. I had the same problem. You have to add like an robber spacers because the open close plastic switch is plastic and with the time it get worn out. I had that problem before and I fixed.b
@miles2237
@miles2237 Жыл бұрын
Great info on the lights and sunroof here. On a side note, the aftermaket airfilter is a really good mod on TC's since the oem air intake is positioned a lil low in the driverside fender and runs the risk of hydrolocking when driving in wet conditions. The relocated airfilter/intake helps prevent catastrophe.
@mattfischer3853
@mattfischer3853 Жыл бұрын
"Or you could be like me and throw them across the room for good measure.." 🤣🤣🤣 Think many of us has that issue.
@DB-qm4jx
@DB-qm4jx Жыл бұрын
how to remove that sunroof switch help me a bunch man thank you. I was gonna remove the whole interior roof panel. lol seriously thanks
@rickethyo
@rickethyo Жыл бұрын
Years later this repair is still going strong! Hope you get years out of yours!
@DB-qm4jx
@DB-qm4jx Жыл бұрын
@@rickethyo yep just finished at auto zone today actually. glad rhats over. blew the fuse under the hood. but i upgraded to the red map lights so thatll be nice in the morning instead of the blinding but dull whit light
@RootSuitMan
@RootSuitMan 2 жыл бұрын
Hey, so I did exactly what you did in this video and was able to confirm continuity between the contacts on the board, however it still isn't working. I noticed it works until it gets hot outside. Then when I click the open button, it makes a click sound but doesn't open.
@JohnnyVazquez30
@JohnnyVazquez30 Жыл бұрын
Same issue here. Did you find a fix?
@zwvl
@zwvl 6 ай бұрын
​@JohnnyVazquez30 same issue any one else with updates?
@RootSuitMan
@RootSuitMan 6 ай бұрын
@@JohnnyVazquez30 ​ @zwvl no fix, it seems to be a pretty common issue when the temperatures fluctuate.
@holysman
@holysman 2 жыл бұрын
Yo man just tried soldering the back had the flux and everything still isnt working 😢 thanks for the video
@irismorales2286
@irismorales2286 2 жыл бұрын
Hi! I'm trying to fix the sunroof and this video is helping a lot, thank you!😊
@trents.b6903
@trents.b6903 3 жыл бұрын
The filter threw me off when I was looking to fix the sun roof issue
@jeremiahwatt5995
@jeremiahwatt5995 3 жыл бұрын
What I have discovered is that depending on the weather/time of day the sunroof has no issue opening. Almost every evening/night the sunroof has no problem opening at all. During the day (especially on a hot day when I need it most) it refuses to open. I tried what you did in this video 3 separate times but didn’t seem to work. I’m guessing the motor overheats in the sun and doesn’t want to open until it cools down
@jordynhelsel8060
@jordynhelsel8060 3 жыл бұрын
literally me rn! but this time it's stuck at an angle
@andrewgarcia521
@andrewgarcia521 3 жыл бұрын
Mine does the same, did you fix it?
@nickkane8690
@nickkane8690 2 жыл бұрын
Every day I get off work and cook in there and it opens fine at night. Anyone find a solution to this???
@RootSuitMan
@RootSuitMan 2 жыл бұрын
that is my EXACT issue. I literally cannot figure it out.
@dorianc.9125
@dorianc.9125 Жыл бұрын
​@RootSuitMan did you ever find a solution.
@michaelmiranda8207
@michaelmiranda8207 3 жыл бұрын
Bad ass video now it works!!!
@delo109
@delo109 3 жыл бұрын
Hey brotha! You're video is very informative and very useful for a longterm solution done properly. However I just discovered a quick solution. If there's just contact not being met put a piece of tape or something on inside of the dome light casing after removing the circuit board. For us non professionals with no saudering tool, tape gets the job done!
@xSustained
@xSustained 3 жыл бұрын
Mine wouldn’t work on my ‘13, but one day I was like lemme just rev this shit and see if it goes and it did, tried it again another time and it didn’t. Things weird man
@ecua407s
@ecua407s 3 жыл бұрын
Hell nahh I rather have someone to do it for me. /:
@favolosoboricua
@favolosoboricua 3 жыл бұрын
Thank you for the guide! This guide also helped 👇🏻 www.scionlife.com/forums/scion-tc-1g-aero-exterior-1636/fixed-stubborn-sunroof-switch-when-closing-sunroof-230738/
@anthonyvasquez7050
@anthonyvasquez7050 3 жыл бұрын
This problem is annoying as hell ! Have the same problem on my car. Idk how to solder, is there any other solution?
@rickethyo
@rickethyo 3 жыл бұрын
You could always replace the board. I didn't price one out but another commenter said they replaced it from dealer. I'd recommend trying to solder it! The solder points are huge, and easy to get to. You can pick up a cheap, decent soldering iron about anywhere. Watch a few tutorials and go to town. If you ruin the board, we'll it's gotta be replaced anyhow. (probably should purchase it first, just to be safe)
@anthonyvasquez7050
@anthonyvasquez7050 3 жыл бұрын
@@rickethyo thanks for the advice
@johnav7827
@johnav7827 4 жыл бұрын
Good tips, terrible audio!
@rickethyo
@rickethyo 4 жыл бұрын
Indeed, which is why I haven't made a new video until I aquire a new camera and mic!
@loganweaver5868
@loganweaver5868 Жыл бұрын
​@Ricky Buchanan nahh the audio is fine
@johnav7827
@johnav7827 Жыл бұрын
My bad, my earphones were broken lol! Apologies!
@loganweaver5868
@loganweaver5868 Жыл бұрын
@@johnav7827 lmaoooo you're good!
@tacuachillo4308
@tacuachillo4308 4 жыл бұрын
I replaced the whole part (brand new) and still having the issue.
@rickethyo
@rickethyo 4 жыл бұрын
I haven't had an issue since I resoldered the connections with mine. It's possible the new part you installed is also bad, or that your issue is in another area. I would recommend (if you're comfortable) re soldering the old board if you still have it and swap it out to see if it solves your issue before going any further.
@tacuachillo4308
@tacuachillo4308 4 жыл бұрын
Ricky Buchanan thanks for the reply. I’ll have to continue to troubleshoot. It worked just fine after replacing the part. But days later I attempted it and it didn’t work. It’s a hit or miss everyday. Is that what yours did?
@rickethyo
@rickethyo 4 жыл бұрын
@@tacuachillo4308 Yeah man, that's the exact symptoms mine had. Intermittent closing, the open seemed to work fine.
@mmawecufc
@mmawecufc 4 жыл бұрын
I can’t find one anywhere online where’d you get yours ?
@tacuachillo4308
@tacuachillo4308 4 жыл бұрын
@@mmawecufc McGeorge Toyota online parts. 81260-21080-B1 Map Lamp
@dav1dh0ff
@dav1dh0ff 4 жыл бұрын
Is it still working? I finally got around to looking up the little switch on digikey. Part number P15958SCT-ND. But if it's just a solder issue, I'll try that first.
@dav1dh0ff
@dav1dh0ff 4 жыл бұрын
I tried resoldering the old buttons, but it didn't work. Replacing the buttons with the ones I linked in my other comment did fix it though. About $3 plus shipping to fix all 4 buttons.
@rickethyo
@rickethyo 4 жыл бұрын
@@dav1dh0ff after 3 months, and with near daily use in the warmer weather I am happy to report that indeed it is still working with zero re occurrence of the original issue.
@bentleyabbott9427
@bentleyabbott9427 5 жыл бұрын
I love you
@bentleyabbott9427
@bentleyabbott9427 5 жыл бұрын
I love you it is Bentley
@bentleyabbott9427
@bentleyabbott9427 5 жыл бұрын
Sabrina and Bentley love you to
@Zensight
@Zensight 5 жыл бұрын
The first comment before my dude gets famous, looking forward to future content man!
@Zensight
@Zensight 5 жыл бұрын
1k views incoming 🔥 - Channel hype!