Video about a sound mixer, and the audio is too quiet
@JOHN-xi5ceАй бұрын
Outstanding!
@Mossy-G7 ай бұрын
Hi there. Re: Swarm 5FX Could you please tell me what the setup is for the remote. I have the separate 2 pin connector. I’m assuming there should be some sort of cable attachment with a control unit? I would be grateful if you can help me resolve this. George
@thedon786able7 ай бұрын
How do u set up to a mixer and laptop plz
@giordanorattazzi20629 ай бұрын
ma qualcuno non sa se esiste una spiegazione in italiano? grazie
@VersaceSounds Жыл бұрын
You guys need to turn the music down so I can actually hear the video
@hariprashad5842 Жыл бұрын
Can I use 2 of this for a church with 12 channel mixer?
@scourneene Жыл бұрын
Does it send seperate tracks to a DAW and does it carry over how one sets the EQ, FX?
@Tim_ArtistName_Tallent Жыл бұрын
It doesn’t separate , it just sends the full stereo mix , the newer Zedi mixers do separate tracks. Not sure about the eq or fx but I assume the recording captures whatever edits u made on the board
@DJJavierVaz Жыл бұрын
Es un spiker activo ?
@DJJavierVaz Жыл бұрын
Es mejor que el DXR 15 en potencia y calidad?
@jasonfallon4968 Жыл бұрын
Hi. Can I plug my iPad jack cables into the Hi z channels?
@luishernandez-guzman18072 жыл бұрын
Waste off time.
@นายประแธน2 жыл бұрын
Can you connect bluetooth?
@kaushikmohanty20652 жыл бұрын
Couldn’t most of it enlarged view of the speaker could have helped.
@jelveralegria44632 жыл бұрын
Can you please tell me the model number for your flight case mixer
@jelveralegria44632 жыл бұрын
Thank you
@jelveralegria44632 жыл бұрын
Hi can you please tell me the name of your flight case and model number for you mixer
@user-yk1xl9dc9t2 жыл бұрын
Where is this
@notyourdadsfriend2 жыл бұрын
can i get this dudes email? i just picked up the mq70 on a whim to replace my magicq 2 universe pc box and id love some one on one time
@bhsoundandlighting2 жыл бұрын
Our email is on the About page of our profile ☺️
@wowbeatszzz32393 жыл бұрын
Seriously what is this???,
@TheoryPost3 жыл бұрын
I really wish you would not use any music. It doesn't help it only hinders. First of all it's distracting and annoying, second of all and more importantly it's louder than the actual narrations so it just ruins the tutorial.
@nguyenkhoa8493 жыл бұрын
The video sound is pretty good, beyond my imagination
Hi, which one is better for live performance? ZED or ZEDi?? I don't need interface.
@bhsoundandlighting3 жыл бұрын
It depends on your needs! There is also the ZED10FX if you need to control effects from your mixer.
@sithembisogumbi79913 жыл бұрын
Does it have a battery 🔋
@bhsoundandlighting3 жыл бұрын
No, this requires mains power.
@moalongjamir90373 жыл бұрын
can you kindly provide a link to download the driver for windows os as it's no longer available in their website
@gmailuser100103 жыл бұрын
Can you connect a passive speaker?
@bhsoundandlighting3 жыл бұрын
Not directly, you can take the XLR signal out into an amplifier to power your passive speaker.
@lbarnett7483 жыл бұрын
6 grand though. A bit crazy
@rennoruutli52672 жыл бұрын
Thats cheap xD
@lbarnett7482 жыл бұрын
@@rennoruutli5267 what if something goes wrong is it gunu be fixable. I’d hope so for that.
@rennoruutli52672 жыл бұрын
@@lbarnett748 It should be. Warranty exists. Consoles notmally last VERY long unless you put them through hel. I have had a MQ70 in my school for like 1,5 years and still not even a single scratch on it.
@lbarnett7482 жыл бұрын
@@rennoruutli5267 I didn’t think of that. Aha. Looks beefy but too much for my pocket. Aha. I’m elektron digitakt and digitone Person. 👍
@yrnchino91683 жыл бұрын
Can u connect to your phone?
@bhsoundandlighting3 жыл бұрын
You would need a cable to stream music from your phone, they have Bluetooth but this is used for controlling the audio EQ and settings from the JBL app.
@Kellynancy383 Жыл бұрын
@@bhsoundandlightingcan u help me
@horaciogaytan37713 жыл бұрын
What lighting console did you guys use on this gig?
@bhsoundandlighting3 жыл бұрын
Their LD at the time of this show was on a GrandMA onPC command + fader wing.
@Jon-ik5pt3 жыл бұрын
Can you connect a subwoofer to these?
@bhsoundandlighting3 жыл бұрын
Yes, there is an XLR thru socket to link on to additional speakers or subs.
@محمدشويكي-ع3ي3 жыл бұрын
Does it need an amp?
@bhsoundandlighting3 жыл бұрын
It's an active speaker, so the amp is built in.
@mattib3r2773 жыл бұрын
Im really regret of buying this!! I just waste my money
@squishmusic3 жыл бұрын
I agree on one this the 10 numbering is deceiving. This is a 8ch mixer 4 mono. 2 stereo.
@squishmusic3 жыл бұрын
i ran out of channels as soon as i opened the BOX :D :D
@Dougie-2 жыл бұрын
@@squishmusic The playback is also stereo, hence 10.
@livesoundz25763 жыл бұрын
Am planning to get a pair of this. How do u compare this with dsr115 in terms of loudness and sound quality? Tq so much
@bhsoundandlighting3 жыл бұрын
We haven't physically compared these to the DSR115 but they are rated at 139db SPL and the quality is superb.
@888visuals3 жыл бұрын
It would be pretty amazing if you did a tutorial with USB out into iPad using the camera connection kit and the app AUM. I am having a hard time working out how the signal comes back into the mixer and what you select to monitor the USB returns.
@squishmusic3 жыл бұрын
from this video I understood the playback channel knob sets the volum of USB return from PC. This will also use up one stereo channel as i understand it. If you want to bring in external effects this will ALSO use up a stereo channel.
@toddsabbath3 жыл бұрын
oi !!!
@joefickry4 жыл бұрын
how to send fx to my monitor/auxes??? bcause i try to sent it but not hear... i try to up the return fx fader on all aux but dont have... please help me....
@bhsoundandlighting3 жыл бұрын
Hi Joe! It could be down to the routing process? Be sure you have all the steps you need switched on for your FX and outputs on the routing page!
@joefickry3 жыл бұрын
@@bhsoundandlighting hmm dont know but bfore this i just use 2 channel input mic fader but some source input mic 1... But routing mic1 route to main LR only and mic2 route to aux monitor only.. And i send using fx1 my reverb to mic1 and mic2.. this trick work.. but now... If i down/mute the mic1 for main LR... but fx1 on mic2 to monitor hear on main LR... How to solve???
@joefickry3 жыл бұрын
@@bhsoundandlighting i follow manual book for SQ.. but its a same...
@bhsoundandlighting3 жыл бұрын
@@joefickry you may need to check if the fx channels are pre or post fade if you have the channel down and no fx?
@joefickry3 жыл бұрын
@@bhsoundandlighting my fx channel om post fader .. thats right???
@nathanmorgan38474 жыл бұрын
Say I have 6 pars all in a line and I need there all on the same channel how do patch that say there all on dmx 112
@bhsoundandlighting4 жыл бұрын
If all the lights are set to the same channel on the fixtures themselves, you will just need to patch one fixture into the console on channel address 112.
@nathanmorgan38474 жыл бұрын
BH Sound & Lighting Hire ah ok thank you
@theleylinesuk6 жыл бұрын
Awesome weekend, wasn't it? Thanks for filming SIAF. The crowd looks beautiful!