What do you think of the 6360rds compared to the 6354do? I was thinking that a 6360 could be turned into a 6390 if the sls was removed
@fenthedogАй бұрын
Thanks! Helped me fix my wobbly barrel.
@fenthedogАй бұрын
How did you get that bluing effect on the metal?
@RojoBarrio-gm9io2 ай бұрын
La verdad muy falso ver cine muy ruido muy fuerte
@moohongjun1512 ай бұрын
So would you recommend the vfc glock 19x over this ?
@atlasprime61934 ай бұрын
I really want to make the cylinder free spin, but to also not lose too many accuracy and range, which is what happens if you remove the inner barrel. Would just shortening the inner barrel so that the tip is barely touching the cylinder to lock it, but is close enough to contain as much pressure so that the loss of accuracy and range is only a little, be possible? If so, how can we shorten the inner barrel?
@PhoenixBlaze17765 ай бұрын
Still practicing with mine, getting faster every day
@austintibbs3 ай бұрын
A little late to the party myself but I'm getting mine tomorrow and will be dryfiring like a madman lol
@henkhulsegge5 ай бұрын
I removed the two pins but I cant get the barrel out its stuck do you have a tip how I can remove it? Thanks...
@krwnik84195 ай бұрын
This needs to be an introduction video to all newbie Umarex Peacemaker users. Don't fan (it's late for me 😐)
@robertmclellan22226 ай бұрын
hey mate where did you get the screw from to mount your acog to the charging handle?
@katrinagary19466 ай бұрын
What holster is that
@psychoslayer27827 ай бұрын
what screwdriver is that? i cant unscrew the top right screw and its probably because all of my screwdrivers are too thick to fit in the hole.
@SemperReloading7 ай бұрын
Try a small size philip screwdriver.
@psychoslayer27827 ай бұрын
@@SemperReloading I don't have any smaller ones sadly
@bulow4537 ай бұрын
My experience with all of these Co2 guns is that they work for about 3 or 4 cylinders before they malfunction, exit all the air and are broke - and they are hard as heck to replace the seal gaskets in them which run about $20 - so I just throw it on the pile with rest of them as they are just junk.
@Eric1so3458 ай бұрын
What’s the top strap part called?
@mattew_27958 ай бұрын
i solved it by buying another bolt lock and that was it
@SemperReloading8 ай бұрын
The new V3 knocker assembly with V3 mag should do the trick. However installing the knocker needs some milling.
@baconhead38458 ай бұрын
Tried jammed my thumb first try. Kinda hurts I’ll try again next week
@justinresendezzschoche577910 ай бұрын
Hearing protection for airsoft? I’m sorry but stop copying real shooting if your gonna do this buy a real ar 15 and a real 1911 and train like this and actually put the hearing protection you have right now to it’s intended use
@Literally_Ryan_Gosling698 ай бұрын
One i believe he lives in Japan so he cant shoot real guns, second when you do airsoft you gotta larp a lil bit
@mr.sinister127910 ай бұрын
How can u fix the hammer gap?
@SemperReloading10 ай бұрын
Try filing down the tail of the trigger sear.
@mr.sinister127910 ай бұрын
@@SemperReloading yea that’s wat I thought.. thanks
@racc793110 ай бұрын
This is an AUG A2 because even though it has the integral optic, it is removable, and you can put a picatinny rail there instead. The AUG A1's integral optic was not removable.
@whyisthefbihere774210 ай бұрын
Which safariland do you have? Springfield Operator with X300?
@SemperReloading10 ай бұрын
Safariland 6280-5621. It’s for 1911 with M6 light.
@whyisthefbihere774210 ай бұрын
@@SemperReloading thanks for the quick response
@curleex383810 ай бұрын
Would love to see how to install a hop up into this gun, there isnt anything on KZbin about it.! This gun needs more power imo
@WildDUCKSrcuul10 ай бұрын
I put gun oil mime and it stop working
@Kareem_Jones11 ай бұрын
Got one of these on my battle belt. I wouldn’t trust any other holster. Going from a Serpa holster to a Safariland was like transitioning from a horse and buggy to an automobile. Using a Serpa is like engaging in risky activities. All it takes is one wrong move and you might end up hurting yourself unintentionally. Too many variables to consider. 😅
@holmes197811 ай бұрын
Question why in your opinion does the trigger not go in flush?
@SemperReloading11 ай бұрын
You mean flush with the rear of the trigger guard?
@TheRefinementOfMen11 ай бұрын
It isnt a 1.5mm? Mine doesnt fit
@SemperReloading11 ай бұрын
1.5mm is too large?
@TheRefinementOfMen11 ай бұрын
@@SemperReloading yes
@TheRefinementOfMen11 ай бұрын
@@SemperReloading it seems to be really small, .5 even
@SemperReloading11 ай бұрын
@@TheRefinementOfMen Thanks for the update.
@TheRefinementOfMen11 ай бұрын
@@SemperReloadingdo you have an explosive view? I'm trying to confirm. Nothing seems to move mine...
@LoveLikeaHurricane Жыл бұрын
doesn't protect from a enemy draw from a rear correct? Its mainly for a front grab protection? ? I have one on my ALA model and couldn't figure out how it benefits.
@SemperReloading Жыл бұрын
It prevents someone reaching the SLS from the front.
@AtillaTheHung1 Жыл бұрын
You're so fast like Bruce Lee. I bet that's jerk hand huh?
@drmarsh4287 Жыл бұрын
Slows down anybody else trying to draw your gun.
@Yirehyah8 ай бұрын
Wrong
@popalot711rb Жыл бұрын
Do u have to push the hood forward or isn't automatic when you push the button?
@SemperReloading Жыл бұрын
You have to push it forward.
@holyshet20 Жыл бұрын
Hey man, Im not sure if you still have your gun, but have you ever tried removing the buttom plate of the magazine? I cant seem to find a video tutorial on doing so
@SemperReloading Жыл бұрын
You can just push it out, if you’re referring to the plastic plate.
@Austin-cx2xe Жыл бұрын
No it doesn’t. Plus it adds a huge level of security
@dpbeatzz Жыл бұрын
That’s a mid rise right?
@SemperReloading Жыл бұрын
Safariland VUBL adjusted to the lowest height.
@dpbeatzz Жыл бұрын
@@SemperReloadingthanks!! Going in to the academy soon
@SleepyDioma Жыл бұрын
On the first clip, is that a single point sling?
@SemperReloading Жыл бұрын
It’s a 2 point. The front end of the sling is mounted on the zip tie.
@Killercod666 Жыл бұрын
does it work for a glock 17 gen 5?
@SemperReloading Жыл бұрын
Depends on your weapon light and optics combos. No experience on trying this with an actual gen 5.
@NotYourAverageCritic Жыл бұрын
Jesus Bourne... that's Jason Christ!
@joshtravis7428 Жыл бұрын
If I’m purchasing from safari land, what exact options did you have selected for this set up ?! Please lmk as the safarilands lingo and add ons make it confusing to know what options to select for my gen 5 Glock 19
@SemperReloading Жыл бұрын
I ordered it from RDR gear with the grey wrapping. Setup wise, I bought them piece by piece in local shops. List: Safariland 6360rds for Glock 34 with X300 6000 SLS hood guard VUBL 6004 thigh strap
@SleepyDioma Жыл бұрын
Any update on this?
@SemperReloading Жыл бұрын
4 years old and still running fine. Ended up building it into a StG 77 A2.
@SleepyDioma Жыл бұрын
@@SemperReloadingbought a used set. Got a really good deal that I could not resist. Anyhow, what spare parts should I buy and always keep in my maintenance box? How do you do your sling?
@SemperReloading Жыл бұрын
@@SleepyDioma Spare parts wise, probably extra magazine lips as they’re quite easy to break when the mag is fully loaded with bb. As for sling, I use the rear of the scope mount and the sling point at the rear of the stock to put a 2 point sling on.
@Y1001 Жыл бұрын
I thought this video was b.s. until I realized I had set it to 1.5x speed mode LOL
@jamessagayaga3153 Жыл бұрын
What size of the hex driver needed?
@SemperReloading Жыл бұрын
1.5/2 mm hex for loosening the screw in the safety.
@jamessagayaga3153 Жыл бұрын
@@SemperReloading thank you sir
@forei8742 Жыл бұрын
Holy shìt that’s quick 😂 I see I got a long way to go
@johnfurnish1458 Жыл бұрын
Is there any indication Sig Sauer has done anything to improve this product since you made the video? You're not the only one saying there are problems with this one. There are a couple of other KZbin vids like this by another user and there are written reviews on product pages. That bothers me since I have a lot of affection for Sig as a brand.
@SemperReloading Жыл бұрын
SIG only provide the trademark license of this airsoft pistol. The actual manufacturer is VFC in Taiwan. I don’t know about the improvements done over time. But there’s increasing amount of tuning parts for this.
@johnfurnish1458 Жыл бұрын
You hint that the faults of this pistol are creating something of a third-party industry in spare parts, am I right? That shouldn't be true, for the price of this weapon.
@SemperReloading Жыл бұрын
@@johnfurnish1458 Price of this airsoft gun is normal for a VFC pistol. About the same as a VFC Glock. Increasing amount of third-party parts is more likely due to the higher popularity of the product, same reason why Marui Hi Capa/Glock has so much aftermarket parts.
@johnfurnish1458 Жыл бұрын
At the end of the day I decided to get an Elite Force Glock 19 since I have a real-world Glock 19 9mm and because I have a good experience of Elite Force, plus all the problems you reveal in this video and that I've seen in other videos about this particular weapon. Thanks for the review video, it was quite helpful and I've of course subscribed. In the meantime, how do you feel about the growing criticism of Tokyo Mauri regarding their problematic customer service/repair situation?
@SemperReloading Жыл бұрын
@@johnfurnish1458 Didn’t try Marui’s customer service so I don’t know.
@HeinzWinchester Жыл бұрын
Thank you it really saved me!
@Tht1guy63 Жыл бұрын
Does it slowdown yes till you train constantly and get your rhythem
@ericktothepoint40811 ай бұрын
And even then professionals goof in the high stress moment
@thetacticalfencer-1457 Жыл бұрын
I’m currently working towards being that fast on my 6285.
@1230henryw Жыл бұрын
What size is a hex key?pls!
@SemperReloading Жыл бұрын
It’s a M2x3 screw. A 1.5mm or 2mm hex key should do.
@1230henryw Жыл бұрын
Thank you!
@chenjack4603 Жыл бұрын
Dose it work on Walter PPQ M2 ?
@SemperReloading Жыл бұрын
I think Safariland made 6360 holster for the 4 inch barrel model.
@tomfrommichigan Жыл бұрын
Thank you for showing us how fast these holsters can be. No doubt this took a bit of daily practice
@jonsingleton203 Жыл бұрын
I just got my SL holster and my G19 with threaded barrel barely fits yet everyone has one what am i missing is there an adjustment or something the retention strap is so fucking tight
@SemperReloading Жыл бұрын
Have you tried loosening the retention screw?
@jonsingleton203 Жыл бұрын
@@SemperReloading yes that just tightens it where the light it for retention. It's the height from muzzle too strap . I put the non threaded barrel back and it fits perfectly
@jonsingleton203 Жыл бұрын
@@SemperReloading I found out you have too get the G17 holster too use the threaded barrel that would have been nice too know up front
@SemperReloading Жыл бұрын
@@jonsingleton203 Yea, hence why a lot of people opt for the 34 size to holster their Roland special builds.
@C.Sharpe Жыл бұрын
Yeah I learned this lesson the hard way, but thanks to this video I was able to fix it by putting a new spring in!
@totkampf84278 ай бұрын
where did you get a new spring?
@C.Sharpe8 ай бұрын
@@totkampf8427 I searched online and found it on a UK website, I believe. I don't remember the site name, sorry