I have that knife and it has been excellent all 5 years I’ve had it.

Vortex Raptor 10x32 Porro Binocular General Purpose/All Terrain Use Awesome.

It's not the size of a quarter It's the size of a thumbnail !!!!! Im so glad we got that straight

I put a vortex on my Glock 43X. Lifetime warranty and their customer service is amazing. Also, I have to add that Glock customer service is amazing. Two day turn around.

Why are you doing it on paper? Do it on hard sweet potato, beetroot, carrots, onions, garlic etc.

I bought one for my 2012 Vauxhall Astra, it worked well and it sorted my mates Mitsubishi L200 when that threw up a fault code following a battery swap.

Cool, want kind a price

Do you know if the Crimson Trace CTS-1250 will fit the GLOCK 43X MOS?? Thanks for the videos!!

I just bought it but in my Daihatsu Terios 1997 it does not work.And the worst is that i dont know if any of the commercial scan readers is compatible with JDM's.Sorrow...

Forgot the spyder flick opening method

😵 I admit it. I can't reach my own bottom. 😂 That is the reason I am here at your video. I want SOMETHING to make that job easier! So I need to know: Have you actually used the bottom buddy? The "business end" looks to be a bit too much business for the average "end" of a large person. It's too fat for the slim area it needs to fit. For example, try thinking of using the bottom of a coffee cup - or even a baby-wipe wrapped egg to wipe off your folded inner arm at the elbow - without being allowed to unfold your arm. At any rate, that is the mental picture i get when i look upon the "bottom buddy". A Coffee cup can't get in there. An egg certainly can't either. The business end of the bottom buddy looks a lot like an egg to us people with elbow room only bottoms. Bottoms that can't quite open up enough for a bottom buddy. And doing bathroom gymnastics is out of the question for us big people. Remember - we can't reach our own "inner elbows" without help. Maybe a slim ruler can get in there. The bottom buddy is not slim like a ruler. It's a bit too inconvenient to try the bathroom gymnastics on a thing like a toilet - especially if you use a potty squatty. I don't want to fall off my toilet let alone my potty squatty. I think the bottom buddy should be a bit slimmer to wipe where the sun doesn't shine. And I have my reservations about the average baby wipes being large enough to wrap around the business end of the bottom buddy. What I am trying to say is that I don't want to end up wiping my bare bottom with a bare bottom buddy. I am a poop-a-phobe. Poop bums me out - pun intended. All that being said, I would like to know how it goes when you try this bottom buddy - if you haven't already. May you are of average physique - and it will work well for you and millions of others. I hope so! The people that invent these things - they do not ever try out the finished product, and we have to waste our own money to tell them how and why their product doesn't work. THAT is THE definition of "$#itty"! Go and read all the reviews for all these "butt cleaner" helper products on Amazon. And THE BACKSCRATCHERS, too! Oh lord! The backscratcher contortions with a tool designed to make scratching your own back easy? They are anything but easy! They break, they don't reach, they twist away from your back - will the bottom buddy twist away from your bottom? Oh God, I hope not! Disabled and elderly people find these and other "helper products" to be anything but helpful. I stand with them. I found a simple wooden paint stirrer from home depot - wrapped in a disposable plastic bag and then a water-dampened paper towel to be much better of a tool for a nice clean behind (and a clean paint stiring stick, too. When finished, just take the bag off inside out with the soiled paper towel inside of it and dispose of it in the garbage. Well now, did I just invent something? No, I just used what I had to get done what needed to be done! I wonder if cave men just used sticks. They definitely used leaves. Leaves and sticks. I heard poop sticks to fur. I really hope it doesn't stick to the bottom buddy. 😁

Trijicon is the best optic for all.

Great video! Thank you! Very clear and easy to understand!

Eh. Ive had the cable to the pressure switch (on 2 different versions of the switch since i had to replace the first one), break internally even with giving the cables slack. Didnt survive the first range trip. Good for airsoft, but definitely didn't hold up to the real deal

The spoon is written as 匕. In addition to using it for ramen or noodle soup, it can also be used for wonton soup or for congee soup or for stew.

Thank you.

This knife is calling to me but I can't find it anywhere to hold before I buy. Should I just order it?

Got this given away by someone , now just checking uto use it and all thanks

I purchased one for my Hellcat Pro. It might work out for outdoor shooting. However, for indoor shooting frankly it sucks. In hindsight purchasing a sight without any type of controls was a mistake. In a well lit indoor range, and shooting a red bullseye target, the dot is so faint you can’t see it. I haven’t had a chance to shoot it outside plinking, so I guess it would be about the same. I removed it, and picked up a Vortex Defender, much better scope for me. Like the old adage, “you get what you pay for. “

Your such a liar..... some SOME people knows how to use chopsticks.its Not Everyone How To Learn And Use Chopsticks....... Some European People Don't Like Asian People And European People Don't Know how Use Asian Don't Know how to use chopsticks.....that Makes everybody

in the I/M readines what does inc mean?

Good video

I'm going to block your damn channel but before I do here's why. There are 2 sides to show on EVERYTHING REVIEWED FROM AN OVERHEAD SHOWING, however 99.9 % of channel reviewers only show their dominate side and maybe the back and never the other side of whatever they review. So because of the plainly inconsiderate thought process I will form here on just block every single channel that does this. I mean you're adults and your asses should be able to use commonsense and know this already.

I'm an HVAC technician and this light is just super for my job.i love how it gives me a nice flood.

Hello, can this device read airbag malfunctions? 3001

You saved ladies' night, good sir 🙌 thank you!

Great video. I absolutely love this thing. I literally have 7 of them. I have a benchmade and still go for my facet in the morning before going to work. I'm not sire what exactly it is, but i have fallen in love with them. They're great. You can get them razor sharp, and they retain an edge fairly well. Especially for a 50 dollar knife. It's not a multi hundred dollar knife and i think that's why i love them so much because i can use it and not worry about my wallet crying. I have beat on them pretty hard and never had an issue.

You lost me at ‘Bottom insert battery’! WHY! Changing a battery should not mean having to re-zero and optic! For me, this is the #1 NO-NO for any optic. After you mount an optic on a slide, it should stay on the slide!

Where can I get a recipe book for dis airfryer. I have bought one today but no book to show what we can make in it.

Which screws did you choose to mount on your Glock 43x

Great Training Video: You must have a military background!!

what is the big ass scratch on the one sight....... looks like cheap paint but i like the price point.

Thanks for the very nice review…

I hear terrible things about CT.

hello do you know if my cr3001 didnt work what should i do ? at first it does work but after that there is nothing on the screen. the screen only have white on it.

Great video. Now I know how to use my new sharpener.

Do I have to watch out for carbon monoxide

Literally everything CT is trash all one drop away from failure, ALL rebranded China dots hard pass, the world knows holosun and trijicon are the only options.

Thank you. I have one of these and had no idea how to change the sharpening discs. Very informative.

Sorry but never buying an optic that has a bottom mounted battery.

Only thing is when battery dies out you need to remove the whole sight off the slide … Holosun products have a dude door for battery replacement

Nice enough and well-constructed but too small to be a functional EDC. Get the next size up.

Does this help clear the ABS light ?

What about the step down?

Dude, chopsticks, quarters, and sharpie are even worse units of measurement than most Americans use, lol. How odd. Chopsticks are not amy kind of standard. Quarters aren't well known in over 200 countries in the world. Sharpies aren't super common outside the US, either. I get what you were trying to do, but a little obsessive and a lack of other more tangible comparisons or measurements missed the mark. However I do really appreciate you actually cutting things, especially other than paper, with it. That's absent from most knife reviews as if they think they'll patronise viewers by doing it. Props for that.

Hi mate,so I got a creeder 3001,I'm getting a p1229 code,what does this mean ? I heard it cud be failed sensor

Everyone seems to say that the G10 version is even better. It does seem like a classic

You updated first??

I have one of the older version, I just don’t like having to remove the battery to swap it.

I'm confused as to why you're cutting it on the top lip and not the bottom..