Luke Williams

Пікірлер

@hanfo420 24 күн бұрын

Thanks. Working again!

@vacuumandgaspressurecoexisting 9 ай бұрын

My problem was a bit different. It would not activate whatsoever. Dived a bit into the menus and saw in the flash settings that the camera seemed to think it had an external flash connected. Problem was some dirt in the hotshoe where there is a tiny button that was stuck.. located on the right side under one of those metal springs. A quick spray with electronic cleaner and a gentle nudge with a toothpick fixed it.

@stupidshetproductions 9 ай бұрын

i tried this but rounded one of the screws, any ideas?

@martijndewaal8169 10 ай бұрын

This fixed my canon 7d mark ii. It does work different with the 7d mk ii and it took me a little while to get it right. But i did fix it in the end😎

@ChannelLALALA Жыл бұрын

This worked to some extent but now my flash wont stick down.... any help?

@deadeyeAZ Жыл бұрын

This works for the Canon Rebel too. I found it hard to believe such a little build up on the hinge screw could bind up the flash like that. I cleaned it and it works like new! Thanks!

@apolakigamingandmore6376 Ай бұрын

Cuz it's the same cam

@Dani-c3x Жыл бұрын

Your video is very helpul to me...i've repair my camera flash...i go to market and shop keeper was saying that the flash lock was broken😂😂😂😂

@louisegrimhelm3041 Жыл бұрын

I have to do this about once a year

@kingrein5780 Жыл бұрын

I have a Canon EOS Rebel XTi that I hadn't used for years and was having the stuck flash. A little different (spring) but pretty much the same process. Your video really helped me out mate!

@willglidewell6796 Жыл бұрын

Thanks!

@ChampagneWasTaken Жыл бұрын

GUYS PLEASE DONT USE A LOT OF WD40 AND SPRAY IT DIRECTLY ON THE CAMERA BODY!! IT WILL RUIN THE LIVE VIEW SESNOR

@lukewilliams7603 Жыл бұрын

100% do not apply any lubricant directly to the camera, it will ruin your camera. Also don't use wd40, it dries out very quickly. Better to use sewing machine oil or '3-in-1' or some other light machine oil. If you don't have any of those, better to use none!! Innox was a bad recommendation in my video.

@francisquete201078 2 жыл бұрын

Carry out the steps, apply a lubricant and walaaww! great job, thanks bro!

@olgabykov2630 2 жыл бұрын

Thank you so much! Same problem here. Quit using the camera for the last 8 years because of that issue. I’ll be fixing it today myself 💪 yay! So excited!

@yvesnicolasmacabale7109 2 жыл бұрын

What is the size of screw driver that you used? Thanks for the reply

@susanyoung6632 3 жыл бұрын

Fantastic! Thanks so much - I thought Id have to take it for an expensive repair.

@Chris619oh 3 жыл бұрын

It worked! Thank you!

@leniehulse1621 3 жыл бұрын

Wow! After so many useless videos I’ve come to a great one!!

@peteruk2 3 жыл бұрын

Thanks for posting this - really helpful

@michaelmueller4704 3 жыл бұрын

Thanks. Fixed my 700D.

@norahenrike5768 4 жыл бұрын

Thank you so much! Same problem with my Canon 700d, it works again now.

@calinemccarthy8812 4 жыл бұрын

Has anyone tried removing the spring coil in a 350d? I can't seem to get it back in place.

@ethanbrookes7398 4 жыл бұрын

Thanks man, this really helped fixed my 700D with this video !!! Cheers Man!.

@Rafael-uv9c 4 жыл бұрын

Excellent instructional video, it helped me BIG TIME! I just finished fixing my Canon EOS 70d that its pop-up flash had stop working a few years back. Your instructions were on the money for the preliminary process to access the torsion spring and retaining screw -that even even though were in the opposite side and shorter, worked similarly. Thanks!

@alexsiniov 4 жыл бұрын

Thank you man! I was going to take my 550D to the service center :D :D

@davidperezvillamizar6513 4 жыл бұрын

Buenas tardes soy de Venezuela y es mi única cámara que tengo para trabajar pero ahora tengo este problema Tienes algún tutorial como repara la zapata del flash externo de una canon 50D ya que esta floja y no hace buen contacto el flash tengo que empujarlo hacia un lado para que haga contacto si esta a su disposición de poderme ayudar lo puede enviar o cual quier manual o vídeo a este correo [email protected]

@rosesuay4060 4 жыл бұрын

Great video 🌹

@SRYedma 4 жыл бұрын

Very good explanation I did my self to fix my broken flash

@onur.akdogan 4 жыл бұрын

I repaired my flash according to your video. Thank you so much. What you shared is so helpful.

@MianFaisalMughalf 5 жыл бұрын

Err5 The built in flash s auto pop up was obstructed turn the power switch to off and on again,,,,, ,,,,,,, video send me

@MianFaisalMughalf 5 жыл бұрын

Err5 The built in flash s auto pop up was obstructed turn the power switch to off and on again,,,,, ,,,,,,, video send me

@mariemarie2463 5 жыл бұрын

super ça fonctionne a nouveau et merci pour l'économie, fait en 1/4 h

@sadamsdykes 5 жыл бұрын

Oh-M-GEE! Thanks so much for this self-repair video. My T3i has started having these issues as of lately. I was thinking about sending my camera to Canon to get repaired but now I'm not. I will try this solution on Wednesday. Once again, thanks so much.

@baloglogable 5 жыл бұрын

Thank you, i just put mine with WD40 and keep folding until loosen. Good tip from your vdeo.

@Vermoot 5 жыл бұрын

Perfect! This worked like a charm on my 1100D/T3i, thank you very much!

@zacdooley4625 5 жыл бұрын

who else stripped screw? now what should i do (:

@lukewilliams7603 5 жыл бұрын

You can create a small strip of Teflon tape, width matched to the thread length, and wrap it around the thread 2 - 4 times. Should keep it in there unless you really went hard on it...

@ttjamzt 5 жыл бұрын

Thanks! worked perfectly with my Canon.

@smileiiprincess 5 жыл бұрын

What the size of screwdriver?

@darmtb 5 жыл бұрын

Thanks Luke, your video helped me fix my stuck flash on my Canon 60D. Similar but a little different to your camera. The spring is on the shutter button side and spring is smaller. Again, thanks very much! Your video gave me confidence to give it a go 👍👍👍

@carlosibar6774 5 жыл бұрын

I never write KZbin comments but had to stop by to say THANK YOU! I just fixed an EOS 400D with the same problem following these simple instructions. Cheers!