Just to let you know on the c207 for the 96 SS Impala has four wires like you stated. The 1995 Impalas possibly 94 and down have five wires on the c207.
@beking322 жыл бұрын
I connected the ac as you explained. My 411 pcm will not ground relay to activate compressor. Do the pcm need programming or do I need to use a Ls high pressure switch. Your help will be great. Thanks
@beking322 жыл бұрын
Do you have a diagram or list for the wires?
@datrill10002 жыл бұрын
Good job bro!!! This Javi Lew from INC funny I looked at an old package where I got something from you today now this!!! LoL
@reynaldomancinas27243 жыл бұрын
Is it the same process of elimination for an lt1 with a carburetor on a 68 impala
@trentdavis83013 жыл бұрын
How much you charge to reworked 96 impala ss to ls dbw lq4
@TG-sm4ix3 жыл бұрын
Can you send me that list or link?
@trentdavis83013 жыл бұрын
How much do u charge to rework a 96 impala harness
Thank you so much for these videos. I hope everything is well with you.
@goldenx8garage6514 жыл бұрын
What forum did you put this list in to keep the cluster happy?
@davidhoward32394 жыл бұрын
Great video Jose you saved me a lot of time...
@iliof14 жыл бұрын
Thank you !
@felixsoto58075 жыл бұрын
Had was communicating with the PCM IDAL port think you might have shown me why
@felixsoto58075 жыл бұрын
I did this same job when I switched my 89 c4 to an LT1 used an impala wiring harnesses your doing an excellent job explaining everything the only problem I ha
@bryantwhitaker35 жыл бұрын
If i sent my harness would you do this for me i will pay
@yolandathomas78626 жыл бұрын
I'm doing a swap on my 94 Impala I was wondering on the wire harness bulkhead that's connected to the firewall for the connector on the LS1 harness that says fuel pump control do I just tie that into the wire on the old Impala harness that says switch B+ fuel pump sensor
@BSias3577 жыл бұрын
I need help with a Dbw harness for 96 impala ss
@djay237 жыл бұрын
Is there a part 5 video with the merging of the 2 harnesses ?
@mac99557 жыл бұрын
Jose, I was thinking about this turn-key option, which is to install everything I could from the 2010 Camaro into my 1996 Impala.www.ebay.com/itm/10-Camaro-SS-6-2L-L99-LS3-Engine-72K-6-Speed-Auto-Trans-Dropout-LS2-TURN-KEY/391656629788?_trksid=p2047675.c100011.m1850&_trkparms=aid%3D222007%26algo%3DSIC.MBE%26ao%3D1%26asc%3D38530%26meid%3Ddc5554b3465c432fbae51e8442a1a848%26pid%3D100011%26rk%3D1%26rkt%3D4%26sd%3D252626243394 Please tell me what your thoughts are.Thank you.
@22AMOPRO8 жыл бұрын
can you send me the list or the website where you can get it from thanks
@22AMOPRO8 жыл бұрын
thanks it's the next thing this year lt1 in a 62 Rambler
@youngdixie2258 жыл бұрын
why not just get a 4.8/5.3/6.0 wiring harness
@youngdixie2258 жыл бұрын
why not just get a 4.8/5.3/6.0 wiring harness
@jspeight648 жыл бұрын
Yes that's what I'm trying to do. Can you help?
@MenofValueSpeaks8 жыл бұрын
How did you go about blocking the hot water tube to the bottom of the throttle body? Also, did you have any issues with the #8 truck coil fitting?
I have an 04 5.3 with a 242 harness. My question is: is it possible to run a/c with this particular ecm/engine?
@seanlsx8 жыл бұрын
did you keep your stock driveshaft for the swap?
@Miguelspl1505 жыл бұрын
If he used a 4l60e then more than likely he used the same one
@HELLBOYCHEVY8 жыл бұрын
Do you have the list
@iceship19 жыл бұрын
Are you using the 96 4l60e
@noodi55559 жыл бұрын
Sir , do you have a ready to swap harnesses that already converted to work on ls engine . I have a 96 ss trying to restore it and make it as daily drive . Thanks
@MrFrankwite19 жыл бұрын
Sweet
@MrFrankwite19 жыл бұрын
Wow did they ever send you the correct things
@youngwork9 жыл бұрын
Love it, I have a 96 SS with a 383 lt1 but I want to move ditch the LT1 and join the LS club. Where you able to still use the 4l60E trans?
@impalastroker9 жыл бұрын
Hello - Not on this particular build I did not, I ended up using the trans out of the donor truck... On the latest build I will be using the old trans that came with the car. it's all possible, just need to find the correct flexplate and adapter. Everything should line up the same.
@al-najjar187110 жыл бұрын
thank you so much for sharing this info Jose , but i have only one concern , i want to keep the "ABS" so how can i do the wires ? i will have the 411 pcm , and a'm in the middle of doing my harness , I will really appreciate your help thanks ..
@impalastroker10 жыл бұрын
I do believe that the ABS system is an independent system all together, I do not remember if any of the wires from the ABS brake module go to the PCM or not, you brought up a very interesting point. The first thing that I would do is test the ABS unit to see if it's a working unit, otherwise it will be just a box taking up space. Let me do some research on how to keep the ABS system functional, I will reply in a few days with the response.
@al-najjar187110 жыл бұрын
thank you for replying , ABS system was fully functional , i agree with you , while looking at lt1's obd 2 pcm pinouts didn't notice any ABS pinout , I hope you don't mind giving me your email to communicate with you thank you
@impalastroker10 жыл бұрын
mohammed al-najjar Are you on the Impala SS Forum? you can easily find me there under user name Jose. You can get my email from that forum, or you can post yours and I will reply.
@al-najjar187110 жыл бұрын
thank you Jose , yes i am , a'll contact you there soon
@adbella6107 жыл бұрын
Jose Garcia how do I contact you .
@fyamotorsports10 жыл бұрын
I had a question bud which exhaust manifolds did you use on your car? are they ls3 Camaro manifolds? also did you have to modify them any or did they bolt right on with no mods? please get back and let me know
@impalastroker10 жыл бұрын
Correct!!! The manifolds are 2010 Camaro ones, they fit like a glove!, the pass side it is in fact close to the frame but no major issues, I didn't had to modify the manifolds of frame at all.
@micheallee843110 жыл бұрын
Good Shit Brotha, After WCG10 I'm Pulling my LT1 out and building an LQ9. Most likely will be hitting you up with some questions.
@jspeight6410 жыл бұрын
I need your help jose, I'm trying to use the hvac/ AC electronic unit from a 94 roadmaster, into my 94 impala can you help? Thanks.
@impalastroker10 жыл бұрын
Not sure what is it that you need help with. Do you want to convert your A/C switches to the digital ones in the roadmaster? The thing to do is to get a set of service manual books to see how both systems work to see what wires need to be swapped, changed, replaced etc. Let me take a look and I will let you know.
@outlaw4sho16 жыл бұрын
@@impalastroker I bought a 1995 with a lt1 swap...can you help? Wires are everywhere
@TheLsSwapGuru10 жыл бұрын
What did you do to get your tach to work did you tube it or buy a converter box
@impalastroker10 жыл бұрын
I had the pin/wire coming to the C204 under the dash in the wrong position. The repair manual show that pin to be on cavity H1, but in fact the tach signal goes to A2 pin.
@demariomitchell84184 жыл бұрын
Ok I’m have the same problem now tach won’t work do I run it from the computer two the back of the dash or ?
@demariomitchell84184 жыл бұрын
Jose Garcia I’m having that some problem do I run the wire from the computer two the dash or
@TheLsSwapGuru10 жыл бұрын
Do your rpm and mph gauge work?
@impalastroker10 жыл бұрын
Yes, they both work correctly.
@djay2310 жыл бұрын
Which motor mounts did you use to keep the A/C ?
@impalastroker10 жыл бұрын
BRP Hot Rods LS1 conversion kit. www.brphotrods.com/products/91-96%20B%20body%20products/index.html Hope this helps!
@djay2310 жыл бұрын
Ah yeah I've seen the BRP kits, I just can't see myself spending that much money on simple parts
@pabuddep19 жыл бұрын
is that the truck a/c compressor
@impalastroker9 жыл бұрын
Yes, AC compressor bracket.
@impalastroker9 жыл бұрын
I used the BRP Hot Rods engine and transimission mounts. Stock truck accessories, water pump spacers and 98-02 camaro water pump or you can use a 2010+ camaro water pump without the spacers. Either way it works great.