You gave me the exact answer I needed, thank you

That engine running IS music

How did you get the old one to slide out of the trans? My mount was broken and I got all the screws out but it doesn’t want to slide out.

Great reason to watch to the end of a video. Thank you for your honesty about your issues. My son-in-law has the Morimotos and loves them. I am considering them, but hate to spend $500! LOL

I’d run Lucas fuel ⛽️ additive in the Ford 24/7 it will keep your fuel Tank ⛽️ clean fuel ⛽️ lines . Will help keep the carb clean and the valves . Don’t forget it won’t have harden valves 👌.

Great model FORD beautiful colours as well 👌🇦🇺.

Hi, just curious about the significance of more than one pushrod bending, I know you can just replace them with new ones, but what happened?

Quite a difference

Is it possible to rebuild the fox 2.0 Monotube version

Thanks for the great video! Quick question, will this method also work on 8th gen Honda Accords, 2007 to 2011?

Does this cove a 96 rodeo with a 3.2?

I have a 2005 Toyota Tundra SR5 Double Cab I bought New. 10 years ago I got a letter from Toyota about Frame rust. I brought my Truck To My Local Dealership where I bought the truck. They gave me a loaner Vehicle. The next morning I got a call From the dealership. They said that the frame Was Like Brand New and Didn't need a Frame. I told them I Am a mechanic and i always pressure washed the underside of the truck in the winter. They Said The mechanics were Impressed How Well the frame was and that they would spray the coating on the frame. I got the truck back . When I used the turn signals the relay cycled fast which means one of the lights is not working. When Checking They forgot to hook Up One of the wire harnesses . Also I checked and saw they scratched the cab of the truck when they reinstalled the bed of the truck which they removed to spray the coating on the frame. 2 years later the coating started pealing off and rust was on the frame which was not on the frame before they applied the coating. That was Proof they didn't clean the frame before applying the coating which sealed in any contamination that was on the frame before the coating. That Dealer Destroyed My Truck. Before Bringing The Truck To The Dealer The Frame Was Like New. I Should Never have Had That Recall Done. The Frame is All Rotted Now And Does NOT Pass State Safety Inspection.

car 81

Hi. # 1 Any problems with heat or air conditioner because you removed the can & all those old parts? # 2 are the new electric headlights on the right way? Left to right does it matter?

Is anyone aware of frame kits available for the last series of Toyota Pickup? I've been looking for kits to fit the 1988-1995 4x4 with single cab. but I've had zero luck locating anything for the frame on the series. Please let me know if anyone has any info on availability. Thanks in advance.

thanks for the video this should give me an idea on what to expect when I work on my 97 rodeo

Thank you!!! I just purchased an 04 with 236k on her clock and want to do this before anything else

Awesome Video! Thanks for making it! Very helpful. I think I could do this job now thanks to your selflessness in making the video. I know you didn't have to. Again, thank you!😁👍👍

Thank you for posting, I just used this exact process to remove my original springs and install new Ridetech springs to drop the front.

Are you able to make a video similar to this one for a 2011 crv? I can’t find any videos to replace my intermediate shaft but the bearing is shot

thank you for posting this . what are on the doors ? i like that look

I gotta do the same i was thinking to remove the CV AXLE but im gunna try this🤔

How 🤔 do you like your new combination?

Hello, "torque405" I saw your channel and saw that in your channel have some problems, not many. For these problems your channel is not growing. If you can solve these problems, Your channel will grow like a storm. Do you want to know these problem? If you Want to know, I can only tell to you. Can I tell here or email?

Altho slow it is One of the better videos for this rebuild

Cant believe you showed us how to take off a wheel but, Didnt show us how to take off the part.youre supposidly teaching us to rebuild. Is this video listed as educational or listed as COMEDY? My neighbors 6 year year old can remove a wheel with a cordless impct(no joke)

Going through that right now with someone buying a cheap vehicle. I keep saying to wait and find one that was cared for. If they don’t look after the body I’d be surprised if coolant diffs tranny brake fluid etc would be looked after either.

I used the NVX sound deadening material and some poly-fill. NVX is Sonic Electonix's version of Dynamat. There's Kicker specific speakers with the correct mounting tabs for the Jeep sound bar which is what I have and the magnet is much bigger than the Kickers you have. I also have an external 4 channel Kenwood amp pushing 50 watts RMS driving my sound bar and front components, also Kickers. The problem I have is the dome light lens rattles with lower frequencies coming through the rear channel. It might change once I get around to connecting my subwoofer and tweaking the crossover settings.

Thank you, I liked it

981 Purdy Springs

If I don't want to put gas, is there a problem?

A few years back when I relived my youth, I bought an 81(which of the 3 C3s I've owned, the other 2 were 1980's I hated)It's a bummer Chevy riveted everything on those cars. A pain when I did the front shocks, control arms, door actuators...

OMG I had this happen last night as I was leaving work. Turned the Jeep off and then back on. It ran fine and I was able to drive 30 miles back home. Then I did some searching and found this video. Sure enough my yellow/red wire was exposed and also a lavender wire. Thanks for posting this man, I wouldn't have known where to start without this video.

After going and reading on what You added. Mine has 344,??? mostly curb side. I have seen 04-08 both sidea and bad. All the hand to hand prepping we did every fall when we were just a little younger was cosmetic compared to what I have learned over the last couple years. Rusting from the inside out. Now one of the shows can't remember Washington State or Minnesota the Gentleman Mentioned that there was a Recall for frame repairs. Sequoia, and Maybe Tundra and Tacoma. No 4Runner Dealer said that there's to many. I think that's what I heard... Mostly I am on late at Night Focused on the 2000 4Runner. Water pump 2 + Years ago was Re-Educating... Love It Though got to be a little crazy...? GOD Bless Y'all...!

sad thing is most states say doing this is a no no. as far as inspection . most rigs now are made like crap. not like the 70s when a frame was built right, its like they took extra fenders bent them up and made a frame

Also possible vacuum leak by distributor

lots of information

Excellent, in depth video, looks like u might need tighter gloves for those type of jobs. Love all of your videos. Enjoy that C3.

Chaim Bridge

I am going to do this to my Tacoma what do you think about welding a plate over the rusted area then welding on the repair kit sleeve

Did you take them for a test ride? If not that will tell you how they perform

I am 69 years old, this brings back memories my father had one 1956 with the 292 engine 😊

My Trooper is similar, but there was an extra "ring" or "washer" in the mix - not the snap ring. Putting it back on i've run into the issue of not having enough axle sticking out so the snap clip isn't getting seated - if i had 1/2 a millimeter it would work! Any suggestions?

Well done. Im in the middle of this now.

Thank you for posting this video. Very educational.

Could I start the car after I've done timing belt to see if it runs and was done correctly or can it not be tested until it's all back together?

I would measure also from the frame to the ground just behind the front wheels with the car flat on the ground or on a drive on lift. Could possibly be how the body is mounted or like another said, the load on the springs could be different.

To do a lineup right you should have the driver in the driver's seat on the lineup machine when it is done back when I worked on cars we had a gentleman that weighed over 300 lb and he was wearing out tires on the front of the vehicle on one side to solve the problem we had him sitting in the vehicle when we had it on the lineup machine it solved the problem just a word to the wise also roads have a crown so the water runs off that has Effect also😊 PS I forgot to mention these Mopars with torsion bars.

Why people don't annually rustproof their vehicles I'll never understand.

How is it with say, 200 LBS. in the driver's seat...?