UDI ARROW 5 Very Short Run.. 4S
5:32
12 сағат бұрын
DTRC M450 Cobra SMC 2200mah 3S Test Rip
9:41
DTRC M450 Cobra Maiden Run+GPS! CNHL 3S
13:30
UDI ARROW 5 New Prop And ESC Testing
7:44
Turtle WoW Is Best WoW
7:41
Ай бұрын
UDI ARROW 5 Sunset Run 4S
9:56
2 ай бұрын
UDI Arrow 5 Maiden All Stock 3S
13:12
Пікірлер
@everydayaquariums1624
@everydayaquariums1624 10 сағат бұрын
Title = ?????
@scaleworksRC
@scaleworksRC 8 сағат бұрын
They say the fun in RC is measured in 'smiles per mile', meaning it doesn't have to be super fast to be fun ..I guess this would be nautical miles? 😄
@reitplace4765
@reitplace4765 3 күн бұрын
Nice Mike, Good little run.. Raining here too.. more room to run haha..
@scaleworksRC
@scaleworksRC 3 күн бұрын
@@reitplace4765 Thanks again! It's a zippy little thing.. and I'm learning how to drive it better. Those turn fins make a big difference! 👍
@scottwhizz2733
@scottwhizz2733 3 күн бұрын
Another good video watch on this boat I use the PVC hockey tape to seal the lid and I ran it across the front end to protect the front if I hit anything at the same time I covered the front vent holes for self-right and it seemed to help the boat self write you want the water to stay in to weight the boat down,the more holes the water seems to run out as fast as it comes in... I love those Dumbo transmitters I have the 10 channel for my cars then I found the six channel that you have works great for my boats get the X6FP receiver and you will get return voltage on the battery with those, I thought you could only have that with the 10 channel to get that and then I found the X6FP... I run my little boats at night at my park when it's been hot here in S, California I put LED lights on them ,6 volt ones you plug in the lights to the 2 prong LED on the receiver and the channel 3 of the remote will turn them on and off... My friends and I stopped racing our short course trucks on Wednesdays to hot,so we decided to get back into boats.... So far it's been a lot of fun learning new stuff my last boats were from the 80s 90s a wild cat and phantom but the nicad batteries were a pain in the ass stopped playing with boats and cars now brushless motors and lipo batts make everything way better.. thanks for the new videos on the Cobra and the an WL915, Arrow is a great boat.. been running it for 3 weeks broke the stock flex shaft.. time to upgraded put in a surpass hobbies 3660 2600kv an 90amp fly color esc, upgrade flex shaft,made my own motor mount to the stock plastic mounts to save money that motor and ESC works great ran in the 90° on 3s had crazy power.. broke four of my cheap plastic props 40,43,45mm ran in hi 40mph thought I would put in my good metal prop 47 mm 1.9p for my big boats the motor rip my flex shaft loose, lost it and my most expensive prop in the lake and broke all my plastic motor mounts😢 so right now cutting all the plastic mounts everything out prepping got a new real motor mount with back holding ring for motor .. then hopefully I can go to 4 and then 6s with this speed control an get in the 60 mi an hour club. These boats get you possessed on making them better.... Full triggerrrrrr
@scaleworksRC
@scaleworksRC 3 күн бұрын
@@scottwhizz2733 Wow, that's quite the journey! I like the tip about the LED lights for night runs, too. I bet you could just run them from inside the boat and have a glow effect! 👍 Boat Gang For Life! 🚤💨
@scottwhizz2733
@scottwhizz2733 3 күн бұрын
Thanks for more videos on this boat, I love this boat.. remember this boat is a racing boat made to go right turn fin on right and boats with rudders on the right turn best going right this boat has great hardware I was looking to buy the oxidean mini dom but could not afford $400 then I found videos on this boat, I think this boat Handel's better and has better hardware for a third the price.. in the video it looks like your boats to dry in the water remember the motor mount is adjustable you're adjust the motor mount up and down the drive shaft goes down pushes the boat down in the water more, I have mine motor adjusted 2 mm up rides just wet enough and cut the water a little more handles really good,try adjusting the motor mount to get better ride and cuts through the water better doesn't want to flip over as easy try to keep everything left batt. Esc, receiver,for self-righting, so far mine self rights about 90% of the time. Take off the bottom screw on the rudder so it can turn up when you hit something like sticks and turtles.. grind off the top corner of the turn fin so it doesn't cut into the boat if you hit something like I did I knew I should have ground that off before I ran it I like the turn fin closest to the boat seems to handle better and it crack my aluminum mount when I hit a turtle or a stick..??... And I just saw your battery in the video is too fat you got to get the skinny 2200 mha it won't selfright with a battery like that... Remember full trigger full triggerrrrrr
@scottwhizz2733
@scottwhizz2733 3 күн бұрын
I run the SMC 2200 mah HP flight packs so far the best their lighter and smaller than regular 2,200 that gets a self-righting working most of the time...
@scottwhizz2733
@scottwhizz2733 3 күн бұрын
PS.. the prop twist left which boat counters twisting right so you keep the battery left all the way left and driving right centrifugal force by going right forces everything left countering torque roll to the right... Turning left with smaller props turns over easier you don't have a lot of twisting torque.. and the centrifugal force goes left with a twisting of the prop turn the boat over.. that's why you build twin motors with props going opposite direction counters everything and it goes straight... But that's a lot more money to put together...😢
@scaleworksRC
@scaleworksRC 3 күн бұрын
@scottwhizz2733 Ahh.. that makes a lot of sense! I learned real quick about torque twist on the Arrow, trying out that big 48mm prop 😆 ..the boat didn't want to turn but had some pretty nice acceleration
@scottwhizz2733
@scottwhizz2733 3 күн бұрын
Thanks for great video on things you should not do I just got this boat a week ago could not afford a big F1 so I went with this WLF1 so far love the boat.. mine out of the box 17 mh then put a 35 mm plastic prop got 24 mh then put a 38 mm prop got 27 mph so far,38 prop that will twist the boat over you must start slow all the way to top speed. remember the prop Drives ccw so the boat wants a twist to the left so you counter that by always driving to the right circling and keep battery on left to counter the torque roll when you start propping up you run into torque roll problems I'm running SMC 2200 HP flight packs the lighter than most 2200mah packs and smaller.. you must set up the boat sand all the gloss off the bottom boat sharpen the rudder and the strut smooth everything out.Grease the flex tube every time you run it and pop the bearings off the flex tube soak them in oil. The bearings are 4/7/ 2.5 mm you can find them on AliExpress I get all my boat parts from that site way cheaper and you can get all the parts for this boat there.. I just got back into boats a month ago first got the Velles 29 Sonic wake 36.. then I started little boats love little boats the DL Arrow,DTRcM450 Cobra great boat..WlF1.. after setting up the hull, it runs full speed in the corners flat out smooth I filled in the self-righting hole in hull with foam it doesn't self right with bigger battery.. it doesn't tip over as long as I don't run it to the left hard.. 99% always going right.. hope that helps someone out there it's a fun boat for the money love how f1s glide on the water... Watch ironcladrc videos Big b you learn everything quick on how to set up your boat..
@JoevsRc
@JoevsRc 4 күн бұрын
I give you lots of credit running at night. Mine would be a quick trip to the curb
@scaleworksRC
@scaleworksRC 4 күн бұрын
@@JoevsRc Thank you.. 🙏 it's the only way I can get runs in without the roads filled with cars
@Rangoli_rc
@Rangoli_rc 5 күн бұрын
Dang now that I see how that rudder ripped out I’m so curious what the heck you hit. That’s just crazy. Nice repair though 👍✌🏼
@scaleworksRC
@scaleworksRC 5 күн бұрын
Yeah man, I was taking it easy too and right after I said something 😄 ..Watching your Fury video now, you wild with those thumbnails😂👍
@Rangoli_rc
@Rangoli_rc 5 күн бұрын
Boat gang vs duck gang😂 dang I was thinking a turtle. That’s crazy. Sorry bro. 👍✌🏼
@scaleworksRC
@scaleworksRC 5 күн бұрын
Those ducks said "no food? ok mister boat guy.." 💥🚤💨😆
@Rangoli_rc
@Rangoli_rc 5 күн бұрын
This Cobra looking dialed in. Cracking me up at the end when you said “come on cobra let’s crack that 40” . I used to drink king cobra 40oz malt liquor as a teenager. Anyway keep up the awesome work bro👍✌🏼
@scaleworksRC
@scaleworksRC 5 күн бұрын
Ahh I remember those.. blue cobra with the red eyes 😄 we always went for the dreaded Old English🤢 ..good times but glad I grew out of that💯
@Rangoli_rc
@Rangoli_rc 5 күн бұрын
@@scaleworksRC amen to that bro.
@mikesrcgarage
@mikesrcgarage 5 күн бұрын
Nice, rip ready! Have a blessed day 🚤💦
@scaleworksRC
@scaleworksRC 5 күн бұрын
Yessir, one plus about the boats.. pretty easy to repair and God willing!
@RadAbyss
@RadAbyss 5 күн бұрын
Oh man savage break but that's part of the hobby lol, here's to the next run.
@scaleworksRC
@scaleworksRC 5 күн бұрын
Yep, she's all ready to go Your last video was sick!
@RubenVieira-EXKRC
@RubenVieira-EXKRC 5 күн бұрын
great looking car nice man👍👍 got a new subs💪
@scaleworksRC
@scaleworksRC 5 күн бұрын
Thanks man.. much appreciated! I need to get this car out again soon, but I think it's time for a brushless upgrade😀
@mikesrcgarage
@mikesrcgarage 5 күн бұрын
Oh snap! That sucks bro but you'll fix it like you said better "IRONCLAD" Lol! 😉👍🏼
@scaleworksRC
@scaleworksRC 5 күн бұрын
Yeah, crazy I wasn't even going that fast and right when I said it 😄 ..repair video is processing now!🦾
@BriansRCStuff
@BriansRCStuff 5 күн бұрын
Those ducks were loving your boat.... no doubt! Love the "broken arrow" reference. Sucks it broke..
@scaleworksRC
@scaleworksRC 5 күн бұрын
I wanted to put the meme clip from the movie in there "..we've got a broken arrow", but don't know how to do that yet.. 😁 Repairs are already done and a short video cooking up now
@BriansRCStuff
@BriansRCStuff 5 күн бұрын
@@scaleworksRC windows key, alt, G to open Xbox screen recorder in Windows. 😎
@RDM3DLAB
@RDM3DLAB 5 күн бұрын
Dam bud!! Well now you have a reason to get a new one!!
@scaleworksRC
@scaleworksRC 5 күн бұрын
LOL
@UrbanLegendRC
@UrbanLegendRC 5 күн бұрын
Nice scaleworks this boat really rips across the water
@scaleworksRC
@scaleworksRC 5 күн бұрын
Thanks ya! It's pretty nippy for the size
@JamesDirtRC
@JamesDirtRC 5 күн бұрын
Wow dude. Must have hit something solid. That's just crazy. I'm sorry.
@scaleworksRC
@scaleworksRC 5 күн бұрын
@JamesDirtRC It was bound to happen eventually I think, but definitely fixable! Just glad I didn't lose a prop or worse 😬👍
@JamesDirtRC
@JamesDirtRC 5 күн бұрын
@@scaleworksRC Man my old channel is Metal detecting, treasure hunting..... My Metal detector an Goggles i can Retrieve a Prop of any size. :) That would suck to lose that.
@grrfy
@grrfy 5 күн бұрын
I see a plastic breakoff pin in your future! I need to do the same tbh to my sr80p
@scaleworksRC
@scaleworksRC 5 күн бұрын
I will definitely take a look at those.. had no Idea there was such a thing tbh 😄 just the ones with the kick up feature. Do you have any suggestions for such a thing? Thanks
@grrfy
@grrfy 5 күн бұрын
@@scaleworksRC not sure what the rudder pin layout is on those but it Might bepossible to use existing rudder with a little filing, here is a start of your mission ,should you choose to accept it "Nylon break off bolt for RC boat rudder suit Proboat" This message will self desruct in 15 seconds!
@scaleworksRC
@scaleworksRC 5 күн бұрын
@grrfy lol thanks.. I could possibly fab something up with what I have on hand 😁👍
@CoffeeCupRC
@CoffeeCupRC 5 күн бұрын
Nice run. But ouch! yeah, tomorrow I’m going up to the White mountains. They have some lakes up there going to bring the boats to check them out. Do some videos.
@scaleworksRC
@scaleworksRC 5 күн бұрын
Sweet! Looking forward to it.. and I'm sure those lakes are stunning 💯
@Rcprescription
@Rcprescription 5 күн бұрын
Was looking like a nice run brother! At least the damage isn’t to bad! 🤞 🤜🤛
@scaleworksRC
@scaleworksRC 5 күн бұрын
Yup, I like this boat too much to let it go to waste
@JamesDirtRC
@JamesDirtRC 6 күн бұрын
I am putting a shout out in my Next intro of my video i do. Love your Content.
@scaleworksRC
@scaleworksRC 6 күн бұрын
Thanks man, I really appreciate that. I will try to remember to include yours as well. I have to start writing down names to remember everybody for the description. I kinda just go off of who I chatted with recently and who has the particular RC I'm featuring. All the best, brother.. getting ready for a sunset rip
@JamesDirtRC
@JamesDirtRC 6 күн бұрын
@@scaleworksRC SWEET :) You Rock dude
@JamesDirtRC
@JamesDirtRC 6 күн бұрын
Love this :) So Fast.
@scaleworksRC
@scaleworksRC 6 күн бұрын
Deffo got more in it.. I'm just timid with these roads. It's sketchy but fun! Thanks bro👍
@JamesDirtRC
@JamesDirtRC 5 күн бұрын
@@scaleworksRC would Wreck my Shins or hurt someone LOL that speed. Awesome
@grrfy
@grrfy 6 күн бұрын
Such a fun zippy boat, defo a bit more unforgiving than a deep V
@scaleworksRC
@scaleworksRC 6 күн бұрын
Yerp.. those fins make a huge difference and I thought the one on this would help but it's a straight fin.
@gillian9178
@gillian9178 6 күн бұрын
The M450 is a great little boat for the money, Mr Mad got 38.8mph stock. On an upgraded 3614 prop he got 40.6mph, I wasn't aware he got 42mph. Maybe I missed that run of 42mph. You may have hit a bit more, that speed meter you have in the boat is quite heavy for a tiny boat like the M450.
@scaleworksRC
@scaleworksRC 6 күн бұрын
That's right.. he was using a Dasboata prop. That's the secret then. I must have been mistaken because I swear somebody got 42mph out of the box with it. 40 sounds right with just a prop upgrade though. Mystery solved! You are 100% about the weight of the GPS, too. It's noticeable in the boat just driving it. Thanks for clearing that up
@mikesrcgarage
@mikesrcgarage 5 күн бұрын
37 on 3s in not bad. Flat water is slow ripples make for faster speeds but less control. I think the mph doesn't matter if you're having fun...
@scaleworksRC
@scaleworksRC 5 күн бұрын
@@mikesrcgarage Very true.. and apparently I was mistaken, but I remember someone getting 42mph stock.. so that's what I was expecting, but you are 100% correct, it self rights now so much more fun
@mikesrcgarage
@mikesrcgarage 5 күн бұрын
@@scaleworksRC It's funny because I am very much about speed and performance of all things especially RC's, but I'm not all about "bust out another thousand" "BOAT" to do it... Heck I don't even have a gps and I fly planes that do over 125 mph 🤦‍♂️ lol!
@mikesrcgarage
@mikesrcgarage 5 күн бұрын
@@scaleworksRC And I agree the auto right makes boating much more fun. I did some nitro boats years ago and you constantly had to retrieve them... I guess that's better than fishing for your drone which I've done several times as well 🤦‍♂️ lol. Be safe and enjoy bro!
@RallyandTrail
@RallyandTrail 6 күн бұрын
Nice rip dude 😎 That’s a cool little boat 🚤 it sounds great at full chat 👍🏁
@scaleworksRC
@scaleworksRC 6 күн бұрын
Yeah, it's a little screamer, but looks like we need to mod something to get her to crack 40.. just not sure what. All the props Mr.Mad tested were slower than the stock prop so far 🤷‍♂
@Project2501ThePuppetMaster
@Project2501ThePuppetMaster 7 күн бұрын
I live in central CA and the dust was to much for the motor. Blew out in less than 10 packs. Besides that, the car is great and super fun.
@Karsyn-i3r
@Karsyn-i3r 8 күн бұрын
Fuck me u got me pawpaw im cookin meth inside my rc car in plain broad daylight 🙄😒
@Karsyn-i3r
@Karsyn-i3r 8 күн бұрын
🧙‍♂️🧙‍♀️what what are u doin there sonny boy?! Is that drugs?! Im callin the police u lil bastard!!
@Karsyn-i3r
@Karsyn-i3r 8 күн бұрын
Gotta love it ur nev3rtoo old to piss off yiur eldery retired neighbors 😂
@mikesrcgarage
@mikesrcgarage 9 күн бұрын
Nice passes but that was a big jump in speed 🤔 voltage sag is when the battery can not support the demand/amp draw of the esc/motor (need higher C rated batteries) 97 is rolling bro!!! Nice!
@scaleworksRC
@scaleworksRC 9 күн бұрын
Yep, I goosed it too hard on that first pass and didn't stay in it long enough on the second to hit that hundo.. next time!
@BriansRCStuff
@BriansRCStuff 10 күн бұрын
You may want to consider 8mm bullets. Let me reach out to CNHL tonight and see if they might be able to help you out.
@scaleworksRC
@scaleworksRC 10 күн бұрын
@BriansRCStuff Wow, I appreciate that! 🙏 I figured 6mm should be enough, but I trust your judgment 👍
@BriansRCStuff
@BriansRCStuff 10 күн бұрын
@@scaleworksRC I think you are right, but I think the 8 mm are a little easier to handle… And I don’t think there’s a big negative as long as you’re using 10 or 12 gauge wires they are decent. I use 6.5 from the ESC to the motor. I totally think you’re OK either way though! 😎
@BriansRCStuff
@BriansRCStuff 10 күн бұрын
Love the night, runs! I kind of want to try it one day but I need to get some lights. Sorry, the speed was a little lower than expected. Edit… 97 is more like it!
@scaleworksRC
@scaleworksRC 10 күн бұрын
@BriansRCStuff Yeah 💯 driver error.. I just had the jitters but it was a good run 🫡
@BriansRCStuff
@BriansRCStuff 10 күн бұрын
@@scaleworksRC I can relate to that!😁
@irishguyjg_2ndchancerecovery
@irishguyjg_2ndchancerecovery 10 күн бұрын
That's such a cool hobby! Keep.up the great work brother! God bless you dude
@scaleworksRC
@scaleworksRC 10 күн бұрын
@@irishguyjg_2ndchancerecovery Thanks! I hope you're doing well, brother. God bless you as well 🫡
@RallyandTrail
@RallyandTrail 10 күн бұрын
Nice running dude 😎 No crashes is a bonus 👍 The car is looking good under the body 🏁🏁
@scaleworksRC
@scaleworksRC 10 күн бұрын
Thanks, brother.. it's nice to be back out on the road again all things considered. She's a tough little Tamiya 😁
@reitplace4765
@reitplace4765 10 күн бұрын
My ceramic bearings do help to squeeze out that extra. Gear up should be sweet bump brother.. after poor boys I'm going to rebuild my girl never ran the 7700 k on it yet. Thanks for sharing Mike lots of good info.
@scaleworksRC
@scaleworksRC 10 күн бұрын
Yep, thanks to RCMichi.. he taught me about final drive ratio and I was going off of just the spur and pinion before. Those bearings are night and day difference, too. I'll use your link when I make the order & hopefully see 120+ out of this old girl
@reitplace4765
@reitplace4765 10 күн бұрын
I like the midnight run... My next couple of runs are night runs so much less stress.. good stuff Mike.. there's always jerks gotta mess with ya.. 😎👍🤙. Rrrrnnnnnnn. Love that sound.. 82 isn't bad feeshy battery will help..
@scaleworksRC
@scaleworksRC 10 күн бұрын
Yep.. people still show up like always, but it was a nice session to knock the rust off. That first pull I jerked the trigger and caused a power cut😄 ..just glad it was me and not the car!
@Rangoli_rc
@Rangoli_rc 10 күн бұрын
Oooo I like that rubber band battery hold 👍👍
@scaleworksRC
@scaleworksRC 10 күн бұрын
Simple, cheap and effective..
@Rangoli_rc
@Rangoli_rc 10 күн бұрын
Yes! I was itching for a midnight club. Always learn something from these. Very interesting how you got 10more mph just from warming up that battery 😮. Learning that gear ratio is tough. Great work bro. Have a blessed day 👍✌🏼
@scaleworksRC
@scaleworksRC 10 күн бұрын
Yup.. I thought getting your car closest to 1:1 ratio is the best for speed runs, but nope. It all has to be tuned and balanced for the power system & that first pull I jerked the trigger and caused the power to cut. Watching your Fury video now
@dexterdcdexter
@dexterdcdexter 10 күн бұрын
SHE'S BACK!!! FANTASTIC FIRST NIGHT BACK OUT THERE.
@scaleworksRC
@scaleworksRC 10 күн бұрын
Thanks! 😃 Now with Brice over at Jack O Trades in the 120s, I think the old TT02 can top it. I knew you'd enjoy this one
@dexterdcdexter
@dexterdcdexter 9 күн бұрын
@@scaleworksRC Like you always tell me, "YOU GOT THIS"!!!💥💨👊🏾
@-RC-Story-
@-RC-Story- 10 күн бұрын
Great night driving is the best 👍 👍 👍 👍
@scaleworksRC
@scaleworksRC 10 күн бұрын
Yeah it was nice to get out and knock the rust off, thanks!
@apexdna
@apexdna 15 күн бұрын
That’s looks like so much fun. This is your best video yet!
@BuzzBuggiesRC
@BuzzBuggiesRC 17 күн бұрын
Always get a stone stuck in the steering it's all good tho great car
@Rcprescription
@Rcprescription 19 күн бұрын
Nice video brother! That recovery boat is working like a champ! Really need to get me a boat!🤜🤛
@scaleworksRC
@scaleworksRC 19 күн бұрын
Thanks, Mike! It should be faster and more reliable when the new pack arrives & soo glad I built the Strider 😄 Go get you one!
@CoffeeCupRC
@CoffeeCupRC 19 күн бұрын
Nice ripper. I think tomorrow i am going to check the two boats I have and catch some video. The pond that i am going to go to has no veggies in it so will be good.
@scaleworksRC
@scaleworksRC 19 күн бұрын
Nice! Looking forward to seeing how they run and hope all goes well
@CoffeeCupRC
@CoffeeCupRC 19 күн бұрын
@@scaleworksRC thanks i have the first one you have red and white wl and a deerc one. Just to check them out been wanting to but been working and it is getting to become fall here then winter with frozen lakes and will be no boating in nh. Lol.
@scaleworksRC
@scaleworksRC 19 күн бұрын
@@CoffeeCupRC Oh yeah, gotta get those runs in while you can. Do you have a recovery method planned out or just gonna wing it? The Strider cost about $60 to build and well worth the effort, plus it's hilarious 😄👍
@CoffeeCupRC
@CoffeeCupRC 19 күн бұрын
@@scaleworksRC i’m just gonna wing it right now and keep it close to the shore sometimes during the winter time maybe or soon I’m gonna test my drone to pick it up if I hook it lol.
@scaleworksRC
@scaleworksRC 19 күн бұрын
@@CoffeeCupRC Good idea! Air rescue 😀
@Rangoli_rc
@Rangoli_rc 19 күн бұрын
Coughing to get your attention 🤦🏽‍♂️ the worst. Them Florida critters scare me. I’m always worried a gator gonna pop up in your videos now you telling me there’s toe biting Beetles under water. Dang. That self righting thing is a shame. Boat looks like so much fun otherwise. Good luck with the fix bro. See you on the next one 👍✌🏼
@scaleworksRC
@scaleworksRC 19 күн бұрын
Lol.. you know exactly what I'm talking about! Like they see me recording and vibing out, then do that crap to interrupt on purpose. The other lady was cool, she was just checking on me and I let her know I'd try to mind her fishing area.. anyhow, I keep my Sig on me at all times, so gators I'm not worried about. The toe biters like to eat little fish, exactly like the ones by my feet so that's how that happens. That would be one hell of a video though! 😆
@reitplace4765
@reitplace4765 19 күн бұрын
nice self right fixed woo woo.. This thign reminds me of my reef runner need to get that out asap.. like the setup bud... cnhl for the win.. Spoke to soon rescue boat to the rescue haha atleast it was close.
@scaleworksRC
@scaleworksRC 19 күн бұрын
Lol I do that too.. comment too soon, but it's all good bro. Kinda frustrating run, but I wanted to get out there today come hell or high water. Get that Reef Runner going!😄
@MrMad2424
@MrMad2424 19 күн бұрын
Nice video! Sucks on the self righting with your current battery config. I heard you say you were debating on getting the Blackjack 24v2 . It's a great boat...highly recommend it.
@scaleworksRC
@scaleworksRC 19 күн бұрын
Yeah, I really like the green Heatwave version and the internals are just beautiful. I just have to move soon, so things are getting chaotic in life.. but I will be able to afford one after everything is settled. Hopefully mid October-ish! Thanks for watching and giving helpful tips, brother.
@mikesrcgarage
@mikesrcgarage 19 күн бұрын
That's a cool boat and it rips nicely... Sucks it wouldn't self right but I'm sure you'll figure it out 👍🏼 Beautiful sunset rip 🙏🏼 God Bless 🙌🏼🚤💦
@scaleworksRC
@scaleworksRC 19 күн бұрын
@@mikesrcgarage Yup.. the 2200mah SMC packs should be perfect for it. Glad you enjoyed the footage and many blessings to you as well, brother. Thank you! Comments like yours make it worth the effort
@ikkelolnl
@ikkelolnl 20 күн бұрын
How is this compared to the MJX Hyper Go 14303?
@scaleworksRC
@scaleworksRC 20 күн бұрын
Basically the same thing but a different shell. The front lip is longer on the 14303 though. They are good cars for the money, just that steering arm needs to be changed and servo updated to metal gear as soon as you can.
@ikkelolnl
@ikkelolnl 20 күн бұрын
@scaleworksRC hmh.. but there is a good price difference between the 14302 and 14303, the 14302 being more expensive. I first wanted to go for the 302, but i saw the 303 being newer and figured perhaps its "better" ?
@scaleworksRC
@scaleworksRC 19 күн бұрын
@@ikkelolnl Well, the body has been updated to the actual licensed version of the Lancia Delta for their v2, so that may be where the extra cost comes in. The unlicensed one I believe I paid about $160.. but in terms of performance, I'd say they are identical.
@ikkelolnl
@ikkelolnl 19 күн бұрын
@scaleworksRC cool, i did some searching for the 14302, but it seems to be impossible to find in my country. I also watched some reviews and it does seem like the cars are identical. The 14303 however is widely available. Just looking which sender i need to pair with it, and which 3s 11.1 lipo's will fit in it. Any recommendations?
@scaleworksRC
@scaleworksRC 19 күн бұрын
@@ikkelolnl The Zee 2200mah packs make this thing rip, and they fit perfect.. but I have some newer CNHL 1500mah black packs that are a bit taller, but have a higher C rating and perform great in cars. It should fit in that tray, but do your measurements to be sure. The Zee pack dimensions you can use as a reference. They are 75mm long x 34mm wide x 26.5mm tall 👍
@RadAbyss
@RadAbyss 20 күн бұрын
What a rip, this thing looks rapid, love it, and great rescue lol
@scaleworksRC
@scaleworksRC 20 күн бұрын
Thanks, brother.. The Strider came through flawlessly! I got a little spare 2S for some ballast and found the big leak, so next time should be better 😄