Thanks!

Thanks for the support! I actually (still) manage to post twice a week, but balancing it with my job and other responsibilities is tough. I have so many ideas in mind that I’d rather focus on creating consistently "good enough" content than delay for perfection. Besides, I still haven’t made a video that feels close to perfection by my own standards. I'm gradually improving the quality, and I hope you enjoy my progress over time!

Theoretically - yes, PCIe 4.0 x1 provides about 2GB/s bandwidth, while 2x2.5Gbit equals 5Gbit total, or roughly 0.625GB/s.

You bet! :)

Glad you liked it! Thanks for the suggestions! I actually already have a video explaining all PSU cables and everything else you need to know about PSUs, you can check it out: kzbin.info/www/bejne/ime4mX93jbKpa8U

Yeah, 1TB system drive is good for longevity and good system health.

Glad you liked it!

Haha, good one! Which distribution do you think most people should try?

@hardwarewhisperer linux mint or deepin should be the one as it looks like windows and are very easy to use. And has a lot of stability as they are debian distributions.

Yeah, Mint is great for beginners, and I also like Ubuntu and its large community support.

Glad you enjoyed it! I feel the same way - my other videos follow a similar style, so feel free to check them out!

Glad it was helpful!

It wasn't jeans 😅 I found the video I was thinking of, he has several new ones on the top though, kzbin.info/www/bejne/pnKlp4eNiN2Cm9U

Thanks! The echo is definitely annoying. Unfortunately, there’s not much I can do about it at the moment, but I’m planning to address the issue in future.

Glad it was helpful!

Thanks for watching! You might find the other videos on the channel interesting too!

Welcome aboard! Feel free to check my other videos!

Thank you for the support! I aim to deliver content like this and hope it reaches a broader audience! Feel free to explore my other videos as well.

Glad it was helpful!

If all modules are the same - it is fine. However, one (or more) of the sticks will run at single-channel mode, so you might have lower performance with memory-intensive tasks. For best performance - use 2 or 4 stick configurations.

Glad it helped! Don't forget to subscribe to get notified about new videos if you haven't already.

I’m not sure I fully understand your question, but no, it’s not about new tech - it’s just the proper way to install RAM for optimal performance in most systems for at least several years.

Haha, close, but the real "school day" is my RAM explanation video! Don't miss it out: kzbin.info/www/bejne/b5KXlHSdd754eZo

Glad you enjoyed it! More videos are coming out soon!

Generally, this is very unlikely. However, it depends on the situation-something simple as dirty contact pins in the slot could cause it to be slower than the other. It also depends on the specific motherboard, that's why I always recommend following the motherboard’s manual. If you share more details about your situation (e.g. your motherboard model, the number of RAM modules, did you used benchmark to check the speed and other relevant info), I’d be happy to help you troubleshoot it.

Thanks!

Glad it was helpful! You can subscribe if you want to get notified about new videos.

Thanks! Hit subscribe and enable notifications from the bell to be informed about future videos!

You're welcome! Feel free to explore my other videos!

Thanks, please feel free to check my other videos. Explanation videos of Intel and AMD naming schemes are coming soon, as well as how to choose a CPU, so stay tuned!

Thanks! I don’t claim it to be the most accurate answer, but it’s general advice based on my experience, to help people who are unfamiliar with computers.

Glad it helped you! Please feel free to check other videos on the channel as well!

It depends on the distribution, but generally if you use GUI, less than 8GB of RAM is not ideal for most use cases. This is a general recommendation; others may offer more specific advice.

@hardwarewhisperer I have 16gb RAM and im using CachyOS(Arch Linux) and dual-boot with Windows 10 for competitive games that aren't working on linux. I asked because after watching your video i feel frustrated because its ret@rd 16gb ram to light gaming on Windows.

Don't worry, 16 GB are fine in most cases, as long as you are not using a lot apps simultaneously and restart often. Better search for the specific games you play to find out the exact RAM usage and recommendations. If you want to be extra sure, just upgrade to 32 GB.

Glad it helped you! Please feel free to check other videos on the channel and stay tuned for more tips!

Generally yes, if you need to store a lot of information, but depends on your needs. Using two SSDs is often not ideal because one of them usually performs slower than the other. This is due to one M.2 slot being connected via the chipset, and most motherboards (except for the latest generation higher end) have only 20 PCIe 5.0 lanes-16 for the GPU and 4 for an SSD. When you add a second SSD, one of the slots typically shares bandwidth with the GPU slot (resulting in 8 lanes for the GPU and 8 for the SSD). Most people don't use PCIe 5.0 drives as they are expensive, but this also depends on the needs. Additionally, in most cases, you don't need two fast drives. A single larger SSD is usually a better option because larger capacity drives typically have a longer lifespan. So, while your proposed setup is a good choice for large amounts of data and provides a reliable backup option, it is also an expensive solution that is only necessary if you have specific needs for it. I tried to provide the minimum requirements that is needed for people who have no clue how much they're going to use, Sorry for the long explanation, but I had to clarify my point. Thanks for watching and don't forget to hit the like button if you enjoyed it!

Glad you enjoyed it! More tips are coming out soon.

Thank you! Feel free to check out my other videos too!

Glad it was helpful! Feel free to check my other videos as well.

Both AIO and tower cooler will do the job, so pick according to your preferences. It depends on a few things: 1. The CPU you are using: More powerful CPUs require better cooling. For instance, an Intel i9-14900K would benefit more from an AIO cooler, although I’ve built configurations with the AG620 air cooler for improved reliability. 2. Performance vs reliability focus: AIO coolers provide consistent performance, even during high-power spikes. On the other hand, air coolers are generally more reliable since they have fewer points of failure. 3. Maintenance and lifespan: AIO coolers might need occasional maintenance, like checking for leaks and ensuring the pump is working properly. On the other hand, air coolers are simpler, typically just requiring occasional dusting to keep them running smoothly. 4. Price: Air coolers are generally cheaper than AIO. Keep in mind that smaller AIOs might provide worse performance than huge tower cooler like the Deepcool AG620 that I have shown in another video. In the end, it comes down to whether you prioritize aesthetics and top-tier cooling (AIO) or simplicity and long-term reliability (air cooler). Both are great options for your use case.

Both are fine for long sessions but if you want to get some cheaper options go for air cooling unless you have something like a 13 or 14 gen intel you will probably be fine with Air

this is a joke btw.

LOL, got the joke, but thanks for confirming! 😂

Yeah, until your system refuses to boot and it’s troubleshooting time! :)

Appreciate the support! However, keep in mind that these comments often get flagged - liking the video and sharing it with others is a more effective way to help.

Thanks! Yes, I’ve planned a video on PSU installation, including where each connector goes. It will be released soon.

Hi, I pushed to release the video you requested sooner. Feel free to check it out: kzbin.info/www/bejne/Z2e7opqNZcZ9Z9k

Glad it was helpful!

I highly appreciate your support! I hope you find the upcoming videos just as useful!

Yes, that issue is usually caused by an old CMOS battery, which is indeed replaceable. Building your own PC is a rewarding experience-go for it!

Did you mean the cooler? I already plan to upload a video about the installation of that particular model. The fan installation is part of the cooler installation process, so it will be covered in my upcoming video. Thanks again for your support.

@@hardwarewhispereryes i meant that

Glad you liked it! The video will be ready soon-stay tuned!

Glad it helped you! I recently bought a rugged HDD for this purpose-call me old-fashioned-but as an Electronics graduate, I don’t fully trust SSDs for long-term backups. That said, if speed is your priority, an SSD is definitely the way to go. Just make sure to power it on at least once every 6 months to avoid losing your data. You can also check this website to compare the speeds of different SSDs: ssd-tester.com/external_ssd_test.php

@@hardwarewhisperer Thank you for the information! I didn't know that if the SSD is not powered on for some time, you may lose data. In my case, it would be powered on every few days, at the time when it will be used to back up my business desktop. During one week I usually alternate between 3 or 4 external drives and do a full backup (including the C drive, etc) at the end of every day. Up to this point I have been using regular external SSD drives, but the backups can take a couple of hours. I'm hoping that with an NVME inside an external enclosure, my backups will go much faster at the end of the day.

Data loss can occur if an SSD is left unpowered for 1-3 years, but I suggest powering it every 6 months to be safe. For your needs, consider the ADATA SE920 1TB-one of the fastest external SSDs-or pair a Samsung 990 Pro with an external enclosure (though USB adapters can sometimes bottleneck speeds). Also, ensure the port you use supports USB4/Thunderbolt 3+ to avoid speed limits. And one last advice - back up only your user folder, not the entire C drive, as copying and pasting system and program files can lead to errors and potential system corruption.

@@hardwarewhisperer Thank you very much for the advice. I'll do that going forward.

Thanks for the suggestion! I’ll definitely cover this in the future. I’ve got "how-to installs" and a GPU explanation coming up first, but this is on my list.

Thank you again! I really enjoy helping others and aim to make videos I’d want to watch - clear and concise. I admire Linus and LTT, though they sometimes stretch things and rely on flashy effects to keep viewers entertained.