I just bought an Ecoflow Max and need to buy an extension cord. All the cords on the T.V., Stereo, and even a VCR/DVD player are to short. I saw a three plugin extension cord on Amazon would this be to much load for one cord? I appreciate your help.

Many thanks for this!

Made a quick video on XT60 vs XT60i for the ecoflow Delta 2. Check it out at the link below. kzbin.info/www/bejne/Z4WUZa2km7V5rM0si=JN55kl4r03ydFwmM

What I would like to do is use the smart panel and the inverter (maybe two) and built out an array of batteries to connect to the inverters. Will the inverters charge the batteries with this method as well?

I have the extra ecoflow battery that can plug in directly to the dc port on my ecoflow wave ac. Unfortunately if I connect the extra battery to my delta2 then my only option is to plug in to the ac port on the wave. Which then has to convert the ac back to dc. So I cannot connect both together and connect to dc on the wave. This was a big mistake by the engineers at ecoflow and it pisses me off.

Does this ups feature damage the battery of the EcoFlow?

Thank you so much! You're so very appreciated. This helped me a ton

So with my eco flow 1300. I could plug in a 12 volt / 300 amp battery. For more Ah power?

I have a eco flow 1300 where does the extra battery plug in at? Would appreciate a answer ASAP. Thanks

Can u use that as a extra add on battery. For more power. Like they try to sell you.

If they weren't building cheap junk,you wouldn't need this cable it would come w/anderson adapters or MC4 connectors,that's the standard world wide, but hey keep buying these cheap,junk,high frequency units, and they will keep breaking, and sucking up your money. As Forrest Gump said,stupid is as stupid does

Hi Paul, the adapter lead you used looked professionally made, so I assumed maybe EcoFlo supplied it. However, when I contacted them they confirmed they don't. I'm handy enough to make a lead, but not being electrically minded, what type of plug is this, and what gauge wire would you recommend to safely take the current from the battery? Cheers Ron (Australia)

Thanks so much for sharing! Just bought the adapter from your link.

What does BMS mean? I recently bought a delta 2 … my solar panels don’t seem to charge despite readings of 21v and 8-9 amps

Middle connector is control only, to tell if its solar or 12v cigarette plug, it does not provide additional current carrying capacity

(1) How to tell when car battery is fully charged (or nearcfull) ? [ I think smart chargers have auto-detect and auto shut off.] (2) will car battery be damaged by charging after full ?

The MTTP is Good in Eco Flow Products

Saw a video about wiring in a resistor and not needing the "i" version of the cable?

Hmm minimally useful and just a repeat of info from elsewhere. It would have much more valuable if you had told people about the internal wiring of the connector, Tieing the new center terminal to positive or negative or not connected at all in the plug and what each voltage state will allow the Battery to do when it dects signal on the middle pin.

Great hack. I have two donated batteries that I have charged for other purposes, so now I got a better use for them.

24 Volt 100ah Lithium Iron Phosphate is used here in Xtreme Need or Emergency for My 2 Eco Flow EF3 Delta Pro 1300's and My Eco Flow River 2 Pro and 2 160 watt and a 110 watt Portable Solar Panels from Eco Flow as well.

I bought a 24 Volt 100ah Lithium Iron Phosphate Battery for $323.00 Shipped Free off EBay just for extending My 2 Eco Flow EF3 Delta 1300's and River 2 Pro at Night when Solar isn't Producing and It Supplements whichever Unit Needs It to Run through the Night. Next Day I Have 800 Watts Charging Said Battery with a Victron 100/30 Smart Charge Controller and It charges as It should during the Day. 🌴 Southern California High Desert 🌵 @ 3,100 feet just 20 miles north of Big Bear Lake Mountain Resorts Community 🇺🇸

This is not an extra capacity. You just charge your ecoflow using other source. After you drain your extra battery you need to charge it. Thats the same as i could easily plug into 12v car source and charge it again. Kinda tricky scenario to say that you are running extra battery. After you done with your lifepo4 and drain it you need to charge it using special charging device. So… useless imho

Cool! Thanks for sharing.

24 Volt 100 amp Hour Battery will Give You what You Need or a Simple Buck Step Up Converter @ 10 amps 12 to 24 Volts in a Pinch 👌

Looking for an update do you happen to know if EcoFlow Nerf this capability to plug 12 V car batteries into the X 60i? When I do it it charges it about 300 W for about two or three minutes and then it stops and zeros out again every 30 seconds and fails. I think that EcoFlow may have updated the software to break this workaround

Well I got a new Delta two with the latest software and I bought an X 60i cable to connect an external lithium battery as I've been told many times that it works . But it only does it for a minute before it shuts off. I'm guessing from the way it's behaving that EcoFlow has gotten the logarithm now that Nerf this capability and no longer works now that I've just wasted my money on this tiny. Can anyone else confirm that EcoFlow has work?

Why does it matter if it’s rated at 100amps when devices like the delta pro only draw 15.9amps max?

I need that adapter I didn’t get one?

Hey I have been using 2 variations of the XT60 and XT60i to o-ring cables I have seen in your videos. They both work great although the XT60i has a better throughput from the battery to the EcoFlow Delta 2. I was wondering if you knew of a way to combine throughput from 2 batteries? The Delta 2 can take 500 watts of solar input, but I can only get like 150ish watts of throughput using the XT60i.

Thank you 👍🤗🙏💖🇬🇧

Thanks, if i knew about this, would've never bought one.

Awesome, I just bought the eco-flow and thought damn... would it be great to charge my car battery for an emergency. And found your video, thanks!

I've enjoyed your videos . Thanks for your hard work.

Nice Vid! Keep up the hard work.

Thanks for this great video. Was looking for a solution to charge my Eco Flow River 2 Max from a battery and found this video. Thanks again

2224?

Thanks for the links and info, just got my delta 3 and excited to start storing energy, cheers

Good video! Solid information. Thank you!!

I just got a Ecoflow Delta 2 Max, and am looking for the solar components now. It's all very confusing. The max input is 500W on each of 2 inputs. Should I used 10AWG or 12AWG versions of the XT60i?

I had problem with solar panels charging. Checked cables the power was coming from panels but when i plug in cable nothing happens. What i did and it helped in my situation in the back of my eccoflow wher is switch turn on/off Ac. After turned of Ac the panels started to charge my ecoflow. After that turn on again AC.

So wow, you can just skip the inverter with the adapter! Thank you! It looks like it max at 100w using the adaptor is that so?

Not working (

Hi friend, could u maybe do a vid showing how to charge EcoFlow generators via an inverter for cars.... Say about 750 watts.

LOL the old KZbin algorithm is really confused today.... Still gave the video a like tho :)

whats the wattage?

What are your thoughts on the new Delta Pro3?

Thanks my car won't start and wonder could I use the ecoflow now I know I can, thanks again

I’ve seen this hack. What would be helpful is to learn how to charge the battery in reverse?

How much