12 сағат бұрын
21 сағат бұрын
Күн бұрын
Ай бұрын
Ай бұрын
Ай бұрын
2 ай бұрын
2 ай бұрын
2 ай бұрын
3 ай бұрын
Пікірлер
@javiersolis1456 53 минут бұрын
My fuel pump won’t turn off ??
@kountrycustombuilds Күн бұрын
I have a 94 k1500 and there is a vacuum hose to the back of my tbi and a pcv on the front.....is this the right way to run it or should I change the vacuum on the back?
@EfurdGarage Күн бұрын
@@kountrycustombuilds usally there is one vacuum on the back and its smaller its for the map sensor. The front is for pvc.
@kountrycustombuilds Күн бұрын
@EfurdGarage ok, yes. I'm sorry, I misspoke. The one I'm talking about is connected to the collar for the air filter and goes to the valve cover on the driver's side. If I put a breather on the valve cover there should I just plug that hose?
@EfurdGarage Күн бұрын
@@kountrycustombuilds yes if you put a breather in the valve cover just plug the hole or get an air cleaner spacer its like the collar but no holes
@__Melzz__ Күн бұрын
I know it’s been awhile but I have 00’ xe 5speed and I got a P0340 so I even have a sensor or is it incorporated in the entire distributor?
@GodlikeGTZ Күн бұрын
I want to go to there...
@EfurdGarage Күн бұрын
@@GodlikeGTZ make a plan for next year!
@bigbryon87 2 күн бұрын
Can't beat the looks of a pontiac
@EfurdGarage 2 күн бұрын
@@bigbryon87 no you cant.
@WillsWheels 2 күн бұрын
WOW, that's ton of Pontiac's! You got your steps in at this one. Why are spectators always spectating in the way? LOL Great Video Terry!!
@EfurdGarage 2 күн бұрын
@@WillsWheels o yea i got enough steps for the year 😆. Many times they just walk in front of the camera on purpose even with my official track media vest on
@WillsWheels 2 күн бұрын
@@EfurdGarage People have zero spacial awareness 🙄 and some just don't care.
@robertclymer6948 2 күн бұрын
Hi Terry! Pontiac Heaven. WOW incredible show. Thanks for sharing.
@EfurdGarage 2 күн бұрын
@@robertclymer6948 it really is. Pontiacs as far as the eye can see. Your welcome!
@tunnelportterror 2 күн бұрын
Get the e.t. boards next time ?
@EfurdGarage 2 күн бұрын
@@tunnelportterror this was just a live shot while there. Hard tp get et board while live with this phone. Now of you watch my highlight video i used my camera and got the time board many times when filming a race as well as the shorts that will be coming out every saturday for awhile
@JackTorrance333 2 күн бұрын
1st💥
@EfurdGarage 2 күн бұрын
yes sir!!!
@jermaine3722 3 күн бұрын
Hi, I have a 1994 Chevy c1500 350 5.7 tbi and I changed both sensors but every time I plug in the one on the side in the block my temperature gauge rises a little and my truck runs hot but it doesn’t overheat but now I have white smoke coming from the dipstick and crankcase!!! Any suggestions?? Thanks
@EfurdGarage 3 күн бұрын
@@jermaine3722 that shouldnt happen. The one in the head on the side is only for the gauge. Intake one controls works with the ecm. Do you have the pvc connected? Used a inferaid thermometer or an after market gauge to confirm temp? How far does it rise?
@jermaine3722 3 күн бұрын
Yes, I also changed the Pcv valve and thought that was the problem but to no avail! As far as the temp gauge goes I’m not an expert but it jumps to the very first thick white line on the gauge from the left.
@donstuart2627 3 күн бұрын
THANK YOU SO, SO MUCH FOR THIS VIDEO. Great to see all the action. Very disappointed I couldn't be there this year, but this sure helped scratch the itch.
@EfurdGarage 3 күн бұрын
Your welcome, glad you enjoyed and glad it helped. There is always next year
@mooosestang 3 күн бұрын
Having a pcv hooked to your carb isn't going to pull more blow by out the motor than would normally be pushed out by the piston motion. What it will do is feed all that blowby and oil back into the intake. Racing motors don't run pcv valves.🤣 a breather on each valve cover is plenty to release the blowby pressure.
@EfurdGarage 3 күн бұрын
wrong. wrong and wrong. do some research first. What is it doing on the carb a vacuum port, pulling excess crankcase pressure so you dont have blowby. If you knew anything about race engines you would know they either run vacuum pumps to pull the pressure out or they use a header evac style system that pulls pressure out. A breather on each side is not enough unless its not running. Even modern engines use a system such as the tube going into the air duct for vacuum. the valve is just a check so pressure dosnt get back in in case of backfire. But hey i guess you know more about cars then the ones that build and race them all the time
@mooosestang 9 сағат бұрын
@@EfurdGarage Some very high horsepower race motors need a vacuum pump sure, but not the vast majority of people just bracket racing 10 second cars. Dont' be such a cocksucker. The pcv is just for emmisions dick.
@ronmerkle3696 3 күн бұрын
looks like a great show! I hope to make it next year for the 50th anniversary of owning my 68 Firebird. thanks for the coverage.
@EfurdGarage 3 күн бұрын
Yea you have to make it at least once. your welcome, thanks for watching
@michaelm3381 4 күн бұрын
I've been attending the car show for 20 years and I still love it. Thanks for sharing.
@EfurdGarage 4 күн бұрын
@@michaelm3381 your welcome. I have only been going the last 4yrs and its always a blast.
@FRL_Memphis 4 күн бұрын
Great event as always, we drive the ‘79 Trans Am in Street and have won the class twice in 2019 and 23, love going every year.
@EfurdGarage 4 күн бұрын
nice! i am sure i seen it and maybe captured it in other videos. I have been going the last 4 years.
@pgp1966 4 күн бұрын
Love your work Terry, thanks heaps mate. Love Arnie's comment "get rid of that corvette and you'll be a normal guy" what a classic line.
@EfurdGarage 4 күн бұрын
Thanks!!!! o yea me too, that was great. I do think he is one to something there LOL
@bigbryon87 5 күн бұрын
I need to make it next year
@EfurdGarage 5 күн бұрын
you do and i guess i am going to have to drag you there LOL
@tamaradavis1732 5 күн бұрын
Thank you so much for sharing this!🤗 I felt as if I was there. Great video of the pontiac family reunion❤
@EfurdGarage 5 күн бұрын
your welcome!!!! I am glad the video made you feel like you was there that is one of my goals with it
@ogtfno 5 күн бұрын
🔥🐐🔥
@EfurdGarage 5 күн бұрын
Yes!!!!
@WillsWheels 5 күн бұрын
That's what I call a Turn Out!! You had an all access pass. Great vantage point's, commentary and some of the drivers made fantastic saves. Outstanding Video Terry!!
@EfurdGarage 5 күн бұрын
Thanks Will! i am trying out the commentary hopefully it helps my videos. Thats one thing i can say i do get alot of access and it helps
@JackTorrance333 5 күн бұрын
Hell yeah!!!
@EfurdGarage 5 күн бұрын
yes sir! hope you enjoyed it
@johnmcdaniel9890 5 күн бұрын
Wow looks like a great turnout and a great time! That is amazing you were able to see Arnie Beswick and the Holey Goat from Pole Barn Garage! I am going to try and make it up there next year, maybe I will see you there. Great video Terry thanks for sharing!
@EfurdGarage 5 күн бұрын
Your welcome, i will be there just look out for me in plaid shorts and the media vest running around with my head cut off lol. It is a great time and always a good turn out. Its worth the trip you have to go at least once if your into pontiacs
@tamaradavis1732 7 күн бұрын
Thanks for video😊
@EfurdGarage 7 күн бұрын
@@tamaradavis1732 your welcome 😃
@user-david6265 8 күн бұрын
I put one on my 283 and it stopped my oil link and made my car idle higher lol
@EfurdGarage 7 күн бұрын
@@user-david6265 idle does change with the vacuum. Just make sure to use your favorite tuning screwdriver 😆
@user-david6265 7 күн бұрын
@@EfurdGarage I did I went around the block and then lowered it so it’s back at 720rpm
@user-david6265 7 күн бұрын
@@EfurdGarage and it don’t smoke anymore or run ruff
@EfurdGarage 5 күн бұрын
@@user-david6265 good, obviously some of us believe stock is bad and modify cars. But sometimes the factory did do things that were needed like the pvc even racers use some kind of evac system to remove crankcase pressure. Glad it is doing good for you!
@icom-pi6tp 8 күн бұрын
I just changed mine out today after a 3k mile road trip as it was squealing. Just wondering is Duralast replacement any good? I noticed my old one was Denso OEM. Also the OEM had an extra hose running from the cap, the new one didn't but i saved that cap just in case
@EfurdGarage 5 күн бұрын
Well i cant recall which brand but duralast is just a rebranded name brand. So it should be fine.
@WillsWheels 8 күн бұрын
Somebody's having FUN!!!
@EfurdGarage 5 күн бұрын
Indeed its a blast out there
@Rustrevivalgarage 8 күн бұрын
Awesome! I"ll be there tomorrow!
@EfurdGarage 8 күн бұрын
@@Rustrevivalgarage awesome i will be around i am sure i will see you
@JackTorrance333 8 күн бұрын
Hell yeah brother!
@EfurdGarage 8 күн бұрын
@@JackTorrance333 how bad was it on your end
@JackTorrance333 8 күн бұрын
@@EfurdGarage not bad. Passable 👍
@EfurdGarage 8 күн бұрын
@@JackTorrance333 new phone is needed for live streams 😆. Got a perfect signal here
@barclaybenjamin6322 8 күн бұрын
Man, I love Pontiacs!!!!
@EfurdGarage 8 күн бұрын
@@barclaybenjamin6322 pontiacs rule
@johnmcdaniel9890 9 күн бұрын
Great video Terry!
@EfurdGarage 8 күн бұрын
@@johnmcdaniel9890 thanks!
@WillsWheels 9 күн бұрын
Congrats on the new job!! Dang, spray paint technology sure has come a long way. Black sure looks better than brown for sure. Great Video Terry!!
@EfurdGarage 8 күн бұрын
@@WillsWheels thanks Will! I thought the color change was an improvement to
@zerocool5395 9 күн бұрын
G2 Matrix, I'm like 90% this would work on my nugget. Like and sub, cheers from Chile!
@EfurdGarage 8 күн бұрын
@@zerocool5395 its possible. Its a good upgrade for sure
@mcrafimendez8938 10 күн бұрын
Ayuda mi Pontiac sunfire arranca pero se apaga no se puede escanear hoy lo arra que y si mantuvo el arranque lo corrí y jalo bien lo apague des pues de 20 minutos de uso y volvió hacer lo mismo al apagarlo ya no encendió
@EfurdGarage 9 күн бұрын
well, it is best to start by trying to get a scanner and scan it. could be a number of things, check fuel pressure, make sure all vacuum hoses are attached and not leaking, make sure all harnesses are plugged in
@zabianbeard4610 10 күн бұрын
Hey, I received p2195 o2 sensor bank 1 stuck lean. I replaced both o2 sensors. Car still won’t stay running. Any suggestions
@EfurdGarage 10 күн бұрын
@@zabianbeard4610 since it has new sensors. Lean means to much air not enough fuel. So check fuel pressure and check for leaks behind the mass airflow sensor such as cracks in the plastic. You can use stuff like wd40, brake cleaner to spray around areas to hear an idle change to find a leaking gasket or crack
@zabianbeard4610 10 күн бұрын
@@EfurdGarage car will crank and stall out. Won’t stay running to check for leaks
@EfurdGarage 10 күн бұрын
@@zabianbeard4610 still look around the plastic for cracks, loose fitting, pvc hose etc
@robertclymer6948 12 күн бұрын
Hey Terry! Funny, I have to do the same thing on # 2 and # 6 with the 460 67 Mustang. Oh Man, the weather sure did change down there huh? lol
@EfurdGarage 12 күн бұрын
@@robertclymer6948 yea a 460 in a little mustang would create some issues like that. Yea it did..... Not sure why i wanted so long for this video to come out 😆
@WillsWheels 12 күн бұрын
Man you are such a Pro...changing that spark plug with one hand while filming (with great shots) just simply Outstanding!!! Great Video Terry!!
@EfurdGarage 12 күн бұрын
@@WillsWheels thanks Will! I have had some years of practice with the camera 😆
@JackTorrance333 12 күн бұрын
I bet you can get quite a few views with a 79 K-5 Blazer will it start video 😂 I know a guy. Cheers
@EfurdGarage 12 күн бұрын
@@JackTorrance333 yea true. I know where one is sitting. We may know the same guy 😆
@JackTorrance333 12 күн бұрын
@@EfurdGarage 😂🫡
@mikeeversfield2719 12 күн бұрын
Your a rockstar man thanks
@EfurdGarage 12 күн бұрын
Thanks hope it helps
@kankanstwin 12 күн бұрын
Very helpful and simple explanation will be doing this after work!!
@EfurdGarage 12 күн бұрын
Thanks!!!
@dangerdoberman 13 күн бұрын
Holy COWL!
@EfurdGarage 13 күн бұрын
@@dangerdoberman i see what you did there 😆
@user-el7zh2zy2q 13 күн бұрын
Thanks 😊
@EfurdGarage 13 күн бұрын
@@user-el7zh2zy2q your welcome
@1badsj 14 күн бұрын
Nice video work. CLEAR photography with vivid colors no commentary. Well done.
@EfurdGarage 13 күн бұрын
Thanks!! I will be here this year again
@6191bee 15 күн бұрын
Are you going to the tri power nationals again? I really enjoyed your video the last time you went.
@EfurdGarage 15 күн бұрын
@@6191bee yep i will be there again! I am glad you enjoy the videos!
@6191bee 14 күн бұрын
I was supposed to go but my boss had a meltdown. If you could get some good footage of 4th gen Trans ams and 69-70 Grand Prix you would be my hero lol.
@EfurdGarage 14 күн бұрын
@@6191bee I will be sure to get them, i will be making multiple videos as always.
@philstucker1312 15 күн бұрын
This may be a crazy question, but would the plugs come out easier if the engine was hot or cold? I don’t want to strip any. Thanks!
@EfurdGarage 15 күн бұрын
@@philstucker1312 warm would be easier
@philstucker1312 15 күн бұрын
Great info! Thanks!
@EfurdGarage 15 күн бұрын
@@philstucker1312 your welcome
@rogerrose8220 16 күн бұрын
LMAOOOOOOOOO!!!!! Your neighbors HATE you LOLOLOL
@WillsWheels 16 күн бұрын
Go good..stop not good...LOL. Cream Puff is a runner and sounds good. Those wheels look good on it as well. You know it's in @Str8sixfan favorite color. Great video Terry!!
@EfurdGarage 15 күн бұрын
Thanks Will! yea i enjoyed this ride it did well.... other then the brakes LOL
@markbogle8062 16 күн бұрын
So what motor is in that car
@EfurdGarage 15 күн бұрын
535ci pontiac with cv-1 heads and intake
@user-mx7xt2id2e 16 күн бұрын
At my shop we call that a tranny bong😂 not too long ago we got a harbor freight oil sucker/dispenser and what a great purchase for all this newer non dipstick bs. Thanks for the vidya
@CrisoforoPerez-fx8qm 17 күн бұрын
Disculpe tengo un Pontiac Sunfire 2003 motor 2.2 pero no encuentro donde se ubica el sensor de árbol de levas