at 14:39 it moves you to activation step, but what to do if in my case the outdoor station is activated and it takes me to login and password step but I dont remeber this and recovery of password is not working , what to do now?
@BeratTheSpicker5 күн бұрын
Hello, I've using the secure module and had to configure it as door two. Now my indoor stations are showing me two unlock symbols... Do you know how i could remove one symbol?
@odysseus410110 күн бұрын
What terminals are used in the controller and the actual settings for combining several controllers into one (if the system operates autonomously, that is, without connecting to a local network)? Perhaps UP-link RS-485... The dip switch is used to set the device number, by default it is 0
@Ent3k859111 күн бұрын
Thank you for this video tutorial👍 pls enlighten me how to download playback video in Hik-Partner Pro desktop Web Browser of IP Camera not within a network.Thanks a lot
@ne0nlightz11 күн бұрын
Can you help me understand why you connected the access point to the switch as opposed to the router? Why would you even need the switch ? It seems redundant as there are plenty of ports on the back of the router. Is there anything I'm missing with this setup? Seems like the router could be connected to both the AP and the laptop/network and modem all together eliminating the need for the switch entirely
@SteeIT13 күн бұрын
Hi, I installed a 2-wire video intercom kit with display model DS-KH7300EY-WTE2. My customer complains because the DS-KH7300EY-WTE2 display makes a noise in the audio when turned on after a while and also when the monitor is on. off I attach video we replaced the monitor with another identical one but after 1 month the problem repeats itself, what could it be? Are there any filters to apply? Thank you
@JayB123-z5z13 күн бұрын
Getting issues with a camera throwing another camera off on an nvr today don’t like this nvr 5.0
@gabrielvarga381218 күн бұрын
Hello do you need a indoor unit for use? Thanx
@GoProRobz20 күн бұрын
Great video. How are the secure door module and access module paired? In other words how to prevent that someone brings his own hikvision access module, rip off the existing access module, connect his own and can still provide the door open signal
@utterlyexiged20 күн бұрын
Does this allow you to web browse any IPC's connected to that NVR remotely?. Virtual host has always been an issue with hik and dauhua without additional porting in the router for each camera.
@sanho8223 күн бұрын
Очень интересно ,но них.я непонятно 😂
@mohssineelbakalikassimi790924 күн бұрын
Hi there, I followed all the steps in video which is very easy and well made (thanks) the problem I encountered is when I scan the fob to add a user I can hear the beep but nothing happens. Please help
@IdnanMisalmi26 күн бұрын
How do we add a new AP to the existing setup? The IT guy left the company, and we want to add one more AP. He mentioned it's a mesh network, and it should automatically pick up the configuration from the master AP, but that's not happening. When I plug it into the switch, it's not adopting the configuration and is still on its default open SSID TPLINK OMADA AC3000
@talal2k228 күн бұрын
Great video! I have a couple of questions: Does the second Hikvision face recognition terminal not need network or power cables when wiring both terminals to a single door using a maglock? When adding a user to the first reader, will it automatically sync and add the user to the second one as well? How do the events from the second reader show up in HikCentral? Are they logged separately or together with the first reader? Thanks in advance for your help!
@edwardkerama201615 күн бұрын
Asking the samr
@mleiva5Ай бұрын
Very good video, thanks for sharing and congratulations!
@mohssineelbakalikassimi7909Ай бұрын
Hi there, Any instructions about powering the panel? Thx
@NetworknSAАй бұрын
is there a specific reason that you state that the outside unit should have its own independant power supply?
@COPLtdАй бұрын
Hi, thank you for your question. The reason for using an independant power supply for the external unit is just incase someone removes (vandalises) the external terminal, exposes the power wires for that terminal and bridges them to short/blow the power supply. If the same power supply was used for both terminals, this would result in power being dropped to the internal (secure side) terminal and therefore allowing the door to be opened. Thanks, Oliver
@mckenziecauserАй бұрын
Great video as always , how does the communication of the monitored mag status (whether is locked or unlocked) get back to the terminal as in this demo it’s only the v+ and v- of the mag used
@COPLtdАй бұрын
Hi, Thank you for your interaction! For the mag status, you would connect the Yellow/Green on the Secure Module to the NC on the mag and a Black(GND) from the Secure Module to the COM on the mag. This status would then be relayed to the Terminal via the RS485 as the RS485 uses half-duplex communication (2 way communication, 1 way at a time). Thanks, Oliver
@tanatswamunashemazwi7274Ай бұрын
So how woul you add a key switch and emergency glass break button to this set up
@eliasbourozrrrs8585Ай бұрын
Please where and how we wire and connect the door opening?
@bestbits.Ай бұрын
Hi, why do you have to use a separate switch to plug in the AP? Can you not plug it in directly to the port on the router? What's the difference? Thanks.
@halilushalco984423 күн бұрын
no difference its same
@DeRoyalGoldtechnologyАй бұрын
How can I get ur number, I have questions to ask u
@NetworknSAАй бұрын
thanks for the great video
@NeculaiGabrielАй бұрын
Does it work with DS-KV6113-WPE1 ?
@COPLtdАй бұрын
Hi, Yes this can. Same principle using the RS485 from the Villa Door Station to the Secure Module.
@NeculaiGabrielАй бұрын
Can we use this controller with a Video intercom ? I ask because I would prefer to control the door lock from a secured tech room instead of directly wiring it to the outside unit.
@NeculaiGabrielАй бұрын
It's just me thinking that someone could break the outside unit and manually wire the door lock relay cable to gain access ?
@COPLtdАй бұрын
Yes, you are correct! If potential vandalism is a concern then we would advise using a secure module: kzbin.info/www/bejne/a4ScfmpjobegrrMsi=nceTDN9RHdhREjNN Thanks, Oliver
@mohideenyasir9353Ай бұрын
Nice
@michealjunior3434Ай бұрын
Thank you BOSS THAT WAS AWESOME
@EngrMushtaqAhmadАй бұрын
Really appreciate your work The way you teach is easy to understand ❤
@kayodeajibade1820Ай бұрын
I also want to know if the DS K2604T is a reader in reader out ( I don't want to use exit button)
@COPLtdАй бұрын
Hi, the DS-K2604 is a 4 door controller that supports 8 readers via RS485 for read in and read out.
@kayodeajibade1820Ай бұрын
I have 10 doors which panel do I go for?
@COPLtdАй бұрын
Hi, You will either need 2X DS-K2604 and 1x DS-K2602. Alternativley, you could opt for the Ultra Series controller, DS-K2704 with 3X 2 door modules DS-K2M002X kzbin.info/www/bejne/npmTXmSIfLeKarssi=L2iuQSOfrZjX8oyi
@Сергей-у7у4чАй бұрын
Can you tell me how to change the lock types? magnetic and non-magnetic ones are installed - NO and NC
@COPLtdАй бұрын
Hi, In the controller, underneith each white relay, there is a jumper. Move the jumper over to change between NC and NO.
@tchallifyАй бұрын
Hi Andy, I notice the new Smart Hybrid Acusense ie live guard cameras These Colorview cameras at night time have a flaw in the firmware they don't do intrusion detection or line crossing notifications at night - it just does not work
@COPLtdАй бұрын
Hi, if you have lost the Smart Event features (line crossing, Intrusion Detection etc...) this may be due to the VCA setting being set to either 'Monitoring' or Face Capture'. So long as the VCA is set to 'Smart Event' you will have 'Line Crossing' and 'Intusion Detection'. This is the default setting.
@majas76Ай бұрын
It's possible to connect multiple mobile phones to a single door station using the HikConnect mobile app?
@yfsgbbkngАй бұрын
Great Video. Learning a lot from your videos. Thank you.
@michealjunior3434Ай бұрын
please add diagram and lock when you are doing the video please
Trying to add hikvision door bell to hikvision M series NVR and I keep getting device type mismatch? I could do it with my old NVR using v4 interface any other ideas?
@COPLtdАй бұрын
Hi, This is an issue that we identified with the current GUI5 firmware. We have been adviced by Hikvision that this will be resolved with the next firmware relase.
@TMCQАй бұрын
@@COPLtd Thanks for the update.
@evaextremvisionafrique9736Ай бұрын
How could I get it ?
@sunnysidegardeners7163Ай бұрын
Can I upgrade my k series to 5.0?
@COPLtdАй бұрын
No, this is just for the M series and the I series Acusense (E) NVR's
@EmungamingАй бұрын
Can I use it for my room 😅😂 Good video to the point 🙏👌
@COPLtdАй бұрын
Sure, why not
@moosaarman1679Ай бұрын
Thank you for u❤
@COPLtdАй бұрын
You're welcome 😊
@jaxlanraxran-sf5fnАй бұрын
I have this kit, in outdoor device have key pad option How to use that, anyone can tell me
@azzouzsaber2878Ай бұрын
This device model DS-7604NXI-K1/4P support nvr 5 or no
@COPLtdАй бұрын
No, this is just for the M series and the I series Acusense (E) NVR's
@phuochori46682 ай бұрын
Great video!! thank you for sharing.
@davidsobel52252 ай бұрын
We love Cop
@ShivkumarChavan-bz7pc2 ай бұрын
Model z901
@sirsrb2 ай бұрын
Can these features be accessed via a Hikvision Poe NVR? Or is a Non POE NVR required to access the cameras directly?
@COPLtd2 ай бұрын
Hello, they can be access via both a POE NVR and a None POE NVR
@sirsrb2 ай бұрын
Thanks 👍🏽
@marlouezcobar71582 ай бұрын
Hello, do you have tutorial on how to add the ANPR camera to Acusense series NVR like DS-7732NXI-I4/S?
@COPLtd2 ай бұрын
We have added it to our list for new videos to come! Keep your eyes out for it! 😀
@V.Kor0082 ай бұрын
Hello. Do all the cables of this camera fit inside the housing?